- หน้าแรก
- เครื่องมือ
- ไขควง
- เครื่องมือช่าง
- ไขควง
- SK11
- SK11: ไขควงเปลี่ยนหัวได้ SID-312B
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[ข้อมูลจำเพาะของผลิตภัณฑ์. (บิตที่แนบมา) ]・ + 1X50 มม
・ + 2X50 มม
・ + 3X50 มม
・ -6X50 มม
สกรูลบ Tanned Plus Bit100mm
มาตรฐาน] SID-312B [Product specifications (attached bits)]
・-+1 x 50mm
・-+2 x 50mm
・-+3 x 50mm
・-6 x 50mm
・Stripped Phillips screw removal bit 100mm
[Standard] SID-312B
รายละเอียดคำถาม
พลังหมุนอันทรงพลังสามารถหมุนเกลียวพร้อมร่องบดเลีย ..
[ใบสมัคร]
การถอดสกรูที่มีร่องสกรูบด
[คุณสมบัติของสินค้า]
ผลกระทบของค้อนเปลี่ยนเป็นกำลังในการหมุนและการคลายเกลียวของสกรูที่ขันให้แน่นเป็นไปได้ ..
สกรูที่มีบิตพิเศษสำหรับถอดสกรูที่ร่องถูกบดเป็นสีแทนและร่องใหม่ทำโดยการตีด้วยค้อนและสกรูจะถูกถอดออก ..
บิตกำจัดสกรู Tanned Plus เข้ากันได้กับสกรูหัวจม M3-M6, สกรู nave, สกรูยึด ฯลฯ The powerful turning power can turn even the screws with damaged grooves.
[Use]
Removing Screws with Crushed Grooves.
[Product Features]
The impact of the hammer is converted into rotational force to loosen tightened screws.
With a special bit for removing screws with damaged grooves by tapping with a hammer to make new grooves and remove screws.
Licked Phillips head screw removal bits are suitable for M3-M6 countersunk screws, flat head screws, truss screws, etc.
[ใบสมัคร]
การถอดสกรูที่มีร่องสกรูบด
[คุณสมบัติของสินค้า]
ผลกระทบของค้อนเปลี่ยนเป็นกำลังในการหมุนและการคลายเกลียวของสกรูที่ขันให้แน่นเป็นไปได้ ..
สกรูที่มีบิตพิเศษสำหรับถอดสกรูที่ร่องถูกบดเป็นสีแทนและร่องใหม่ทำโดยการตีด้วยค้อนและสกรูจะถูกถอดออก ..
บิตกำจัดสกรู Tanned Plus เข้ากันได้กับสกรูหัวจม M3-M6, สกรู nave, สกรูยึด ฯลฯ The powerful turning power can turn even the screws with damaged grooves.
[Use]
Removing Screws with Crushed Grooves.
[Product Features]
The impact of the hammer is converted into rotational force to loosen tightened screws.
With a special bit for removing screws with damaged grooves by tapping with a hammer to make new grooves and remove screws.
Licked Phillips head screw removal bits are suitable for M3-M6 countersunk screws, flat head screws, truss screws, etc.
คำเตือน
* ดอกไขควงสำหรับถอดสกรูหัวแฉกกระป๋องไม่ได้มีไว้สำหรับใช้กับสกรูที่แข็งมากเช่นเกลียวหยาบสกรูเกลียวปล่อยและสกรูเจาะ. การตอกลงไปอาจทำให้ปลายบิตเสียหายได้* ห้ามใช้ผลิตภัณฑ์นี้ในบริเวณที่ค้อนทุบอาจทำให้วัสดุเสียหายหรือทำให้วัสดุที่ขันสกรูผิดรูปได้
* กรุณาอย่าใช้สำหรับกระแสไฟฟ้าไหล
* โปรดใช้อันที่ตรงกับขนาดของสกรู
* สวมแว่นตาป้องกันและอุปกรณ์ป้องกันเมื่อทำงานกับผลิตภัณฑ์นี้
* ห้ามใช้ผลิตภัณฑ์เพื่อวัตถุประสงค์อื่นใดนอกเหนือจากที่ตั้งใจไว้ในตอนแรก
* โปรดทราบว่าข้อมูลจำเพาะของผลิตภัณฑ์อาจมีการเปลี่ยนแปลงเนื่องจากเหตุผลของผู้ผลิต *Tanned Phillips screw removal bits cannot be used for very hard screws such as coarse threads, tapping screws, and drill screws.Hammering into them may damage the bit tip.
*Do not use it in the place where the hammer blow may damage or deform the screwed material.
*Do not use on anything that has electricity flowing through it.
*Use the correct size for screw.
*Wear protective goggles and protective equipment when working with this product.
*Do not use for any purpose other than that for which it was originally intended.
*There may be changes in product specifications due to the manufacturer's reasons.
ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/