- หน้าแรก
- อะไหล่แต่ง
- ชุดสีมอเตอร์ไซค์
- แฟริ่ง
- แฟริ่งหน้า
- GOODS
- GOODS: FXRT ชุดแฟริ่ง
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[ขนาด]ความกว้าง: ประมาณ 760 มม.
ความยาวด้านหน้า/ด้านหลัง: ประมาณ 500 มม.
ความสูง: ประมาณ 520 มม.
[วัสดุ]
FRP
เนื้อหาสินค้า
ตัวครอบ, ฉากกั้น, ชุดสกรูสกรีน [Size]
Width: Approx. 760mm
Front and rear length: Approx. 500mm
Height: Approx. 520mm
[Material]
FRP
Components
Cowl body, windshield, windshield screw set
รายละเอียดคำถาม
ชุดแฟริ่งของ FXRTStyle
FXRT style fairing kit.
คำเตือน
* ฝาครอบนี้เป็นผลิตภัณฑ์เอนกประสงค์ที่ผลิตในต่างประเทศ จึงอาจมีรอยขีดข่วน รอยขีดข่วน และการเสียดสี ฯลฯ ที่อาจทำให้รูไม่พอดี และอาจจำเป็นต้องแก้ไขเพื่อการติดตั้ง โปรดทำความเข้าใจสิ่งต่อไปนี้ก่อนที่จะซื้อ*ชุดไฟและฝาครอบอาจรบกวนกัน ซึ่งในกรณีนี้จำเป็นต้องถอดส่วนที่รบกวนของฝาครอบออก
*ตะเกียบและฝาครอบ ที่ครอบอาจรบกวนกัน ดังนั้นคุณต้องตรวจสอบระยะการเคลื่อนที่ของด้านซ้ายและด้านขวา และโกนที่ครอบหากมีการรบกวน
*ชิ้นส่วนที่รบกวนอื่นๆ จะต้องถูกตัด โกน หรือดำเนินการอย่างอื่น*สำหรับชุดไฟแยกจำหน่าย จะต้องสร้างสายรัดส่วนต่อขยายจากสายรัดหลัก
*รูระหว่างพักกับครอบอาจเลื่อนไปตามตำแหน่งของครอบ ในกรณีนี้ คุณต้องขยายรูในฝาครอบให้กว้างขึ้น
*มีกรณีที่รูหน้าจอและรูครอบไม่ตรงกัน ในกรณีนี้ คุณต้องแก้ไขหน้าจอและรูครอบจากรูตรงกลางของ ครอบออกไปด้านนอกด้วยน๊อตบ่อ แล้วขยายส่วนที่ไม่เข้ากับตะไบ
*บางรุ่นไม่มีรูด้านข้างของกระจังหน้าสำหรับสกรีน ในกรณีนั้น ให้เจาะรูเพื่อให้เข้ากับหน้าจอ
*วิธีการดำเนินการอื่นนอกเหนือจากที่ระบุไว้ที่นี่ไม่สามารถใช้ได้ ดังนั้นโปรดตรวจสอบกับรถจริง
*ผลิตภัณฑ์อยู่ระหว่างการประมวลผล ดังนั้นเราจึงไม่สามารถรับคืนสินค้าเนื่องจากไม่สามารถติดตั้งได้
*โปรดดำเนินการและติดตั้งผลิตภัณฑ์ก่อนทาสี ไม่มีการเรียกร้องค่าสินไหมทดแทนหลังจากการทาสี
*โปรดทราบว่าข้อมูลจำเพาะของผลิตภัณฑ์อาจเปลี่ยนแปลงได้เนื่องจากเหตุผลของผู้ผลิต *Bracket and light unit sold separately.
*Please make sure to read the notes before purchasing.
*Bracket kits for DYNA, XL, MILWAUKEE FXBB and FXLR are available (sold separately)
*7 inch projector LED headlight unit and the same type of light unit are used for the lights.
*Because this cowl is a universal product made non Japanese, it may have some scratches and scuffs, and the holes may not fit, so some modification is required for installation.Please make sure you understand the following information before purchasing.
*The light unit and cowl may interfere with each other, in which case it is necessary to shave the interfering part of the cowl.
*There is a case that the fork and the cowl interfere with each other, check the range of movement of both sides and if it interferes, it is necessary to shave the cowl.
*Other interfering parts need to be cut or shaved.
*For light units sold separately, it is necessary to make an extension harness from the main harness.
*Depending on the positioning of the cowl, the hole between the bracket and the cowl may be misaligned.To do this, you will need to widen the hole in the cowl.
*In some cases, the holes of the windshield and the cowl do not match, in that case, you need to fix the windshield with the well nut from the center hole of the cowl to the outside, and widen the holes with a file in order.
*Depending on the lot, some of them do not have the hole for the windshield on the cowl side.In this case, please drill the holes in order to match the windshield.
We will not provide information about processing methods other than those mentioned here, so please verify according to your actual bike.
*Any returns will not be accepted due to inability to install the product.
*Please be sure to process and install before painting.Any claims after painting are not accepted.
*There may be changes in product specifications due to the manufacturer's reasons.
ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/