หน้าแรก

【KIJIMA】VANS X CULT Collaboration Grip 7/8-inch

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿1,526
ราคาเต็ม: ฿1,658 8% |
คะแนนวีไบค์: 16
Shipping point: 3.2 pts ( 3.2 pts x 1qty)

กรุณาเลือกตัวเลือกของสินค้า


ตรงรุ่น:

CB1100 17-21 (Model:SC65 TAH)

CB250R 18-21 (Models MC52-100, 110)

CB300F 16-18 (Models AC, F, FA)

250TR 02-13 (Model BJ250-F1, F2, F3, F4, F6F, K7F, K8F, K9F, KBF, KBF, KCF, KDF)

ER-6n 12-16 (Models ER650EDS, EFF, EEF, ECF, EGF)

ESTRELLA CUSTOM LIMITED EDITION 02 (Model:BJ250 H1)

BURGMAN 400 18-21 (Model AN400 K7, K8, K9, L8, L9)

GSX-R1000 11-21 (Models K7, K8, K9, L1, L2, L3, L4, L5, L6, L7, L8)

GSX-R600 11-20 (Models K8, L1, L2, L3, L4, L5, L6, L7, L8, L9)

ดูเพิ่มเติม

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คำอธิบาย]

* ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง

[คำเตือน]

*Image may contain other colors.
*Because this product is designed to be highly versatile and is a collaborative product, it may have a long or short grip depending on the vehicle even if it is listed as a compatible vehicle as reference information.Please measure the size of the grip of your vehicle by yourself before considering.

*If the grip is too short, please consider using KIJIMA product #201-597 Grip Spacer Sponge Type Thickness 5mm, KIJIMA part #201-5971 Grip Spacer Rubber Type Thickness 3mm and KIJIMA part #201-5972 Grip Spacer Rubber Type Thickness 5mm.As you can see in the photo of Kawasaki ZRX1200DAEG, it is a short product.Please be sure to measure the grip dimensions of your vehicle before considering.
*This product is finished with a closed end. If you want to install it on a vehicle equipped with a bar end, you will need to make a hole in the grip or remove the bar end.
*Please compare the pictures with the example of KAWASAKI ZRX1200 DAEG, and recognize that the product image is only for reference and then the color may be lighter, darker, brighter or darker than you imagine due to the colorant and emulsifier used in each lot.
*Please note that product prices are subject to change without notice in light of exchange rates and world conditions.
*It is intended to slide like any other standard rubber grip.
*In order for the grips to work on a motorcycle, the stock throttle cone must be pre-installed.
*The throttle cone is not pre-installed on this grip.
*Each set comes with two grips, a grip with a samll inner diameter that slides on the clutch side and a grip with large inner diameter that slides on the throttle side.
*There may be changes in product specifications due to manufacturer's reasons.

[รายละเอียดสินค้า]

Waffle grips developed in collaboration of VANS x CULT MOTORCYCLE are finally released!

VANS and CULT MOTORCYCLE have collaborated to create a motorcycle grip that embodies OFF THE WALL.

The classic Vans waffle sole pattern and dome section in the center of the grip provide comfort and vibration dampening.

The grips were designed by CULT MOTORCYCLE and manufactured by ODI who is famous for their Lock-On Grip system.

Using a proprietary rubber compound, we've created a grip that we hope will become as classic and standard as Vans shoes.

Length 125mm.
Sold as a pair.
Proudly made by ODI in the US.

ตรงรุ่น

รีวิวสินค้า

สินค้าที่เกี่ยวข้อง

【Neofactory】JACK HAMMER Grip
  • IN STOCK
JACK HAMMER Grip Neofactory SPORTSTER

สินค้าที่มีผู้เข้าชมมากที่สุด