*I-MAP is separately required for installation. *I-MAP does not have a special map, so you need to make your own injection map with the user setting map.In addition, due to various effects such as O2 feedback control, the dose may not be increased in all areas. *The fuel injection values are compared with those of stock injectors. *Stock manifold, Kitaco manifold can be used.
This is a large-capacity injector that secures the amount of fuel injection when tuning the engine. Each injector has a different amount of injector compared to the stock injector. Please use the type that matches your tuning level. The coupler shape is the same as stock.
I picked up fuel injector part number 403-9000040 from Kitaco for my big bore engine set up. Unfortunately this K004 2.6 times fuel injector was too big for my current engine set up and did not perform as desired. Will being keeping this and trying it our again in the future with a different engine set up. Installation requires disconnecting of the fuel line and electrical connector then lightly lubricating the supllies o rings with engine oil before fitting. Good fuel injector and at reasonable price. Great variety of products available from Webike at competitive prices.
ดูรายละเอียด
I changed it to 1.6 times of OEM because of the installation of SStageBore Up Kit The fuel control is controlled by FIcon 2 I don't have the A/F ratio meter now, so I don't know the actual A/F ratio It is I think the power will be less, but I've chosen to be safe and adjusted the settings with a slightly denser setting It's not too thick If it's too thick, Carbon will be deposited on the surface, so be moderate! It is In case you're wondering... SP Takekawa:HYPERSStageBore Up Kit181cc in the published image Injector is listed, and although there was a Plug in Kit Note that the Injector is not included! Also, install carefully... when you remove the OEMInjector, there will be some Gasoline coming out! So no fire! Don't Cigarettes while working! Also, don't get Garbage in the Injector exchange! And not to hurt the discharge tip! It is
ดูรายละเอียด
ใช้กับรุ่นรถ: HONDA glom, HONDA glom
Good injector but chose the wrong capacity
I picked up fuel injector part number 403-9000040 from Kitaco for my big bore engine set up. Unfortunately this K004 2.6 times fuel injector was too big for my current engine set up and did not perform as desired. Will being keeping this and trying it our again in the future with a different engine set up. Installation requires disconnecting of the fuel line and electrical connector then lightly lubricating the supllies o rings with engine oil before fitting. Good fuel injector and at reasonable price. Great variety of products available from Webike at competitive prices. ดูรายละเอียด
หัวฉีดดีแต่เลือกความจุผิด
ฉันหยิบชิ้นส่วนหัวฉีดน้ำมันเชื้อเพลิงหมายเลข 403-9000040 จาก Kitaco เพื่อตั้งค่าเครื่องยนต์กระบอกสูบขนาดใหญ่ น่าเสียดายที่ K004 หัวฉีดน้ำมันเชื้อเพลิง 2.6 เท่านี้ใหญ่เกินไปสำหรับเครื่องยนต์ปัจจุบันของฉันที่ติดตั้งและไม่สามารถทำงานได้ตามที่ต้องการ จะเก็บสิ่งนี้ไว้และลองอีกครั้งในอนาคตด้วยการตั้งค่าเครื่องยนต์ที่แตกต่างกัน การติดตั้งต้องถอดสายน้ำมันเชื้อเพลิงและขั้วต่อไฟฟ้า จากนั้นจึงหล่อลื่นวงแหวน o ด้วยน้ำมันเครื่องก่อนทำการติดตั้ง หัวฉีดน้ำมันเชื้อเพลิงที่ดีและราคาที่เหมาะสม มีผลิตภัณฑ์มากมายจาก Webike ในราคาที่แข่งขันได้ ดูรายละเอียด
แสดงที่มาใช้กับรุ่นรถ: HONDA glom, HONDA glom
Just in time for Bore up!
I changed it to 1.6 times of OEM because of the installation of SStageBore Up Kit The fuel control is controlled by FIcon 2 I don't have the A/F ratio meter now, so I don't know the actual A/F ratio It is I think the power will be less, but I've chosen to be safe and adjusted the settings with a slightly denser setting It's not too thick If it's too thick, Carbon will be deposited on the surface, so be moderate! It is In case you're wondering... SP Takekawa:HYPERSStageBore Up Kit181cc in the published image Injector is listed, and although there was a Plug in Kit Note that the Injector is not included! Also, install carefully... when you remove the OEMInjector, there will be some Gasoline coming out! So no fire! Don't Cigarettes while working! Also, don't get Garbage in the Injector exchange! And not to hurt the discharge tip! It is ดูรายละเอียด
ถึงเวลาเบื่อ!
ฉันเปลี่ยนเป็น OEM 1.6 เท่าเนื่องจากการติดตั้ง SStageBore Up Kit การควบคุมเชื้อเพลิงถูกควบคุมโดย FIcon 2 ตอนนี้ฉันไม่มีเครื่องวัดอัตราส่วน A/F ดังนั้นฉันจึงไม่ทราบอัตราส่วน A/F ที่แท้จริง คือฉันคิดว่าพลังจะน้อยลง แต่ฉันเลือกที่ปลอดภัยและปรับการตั้งค่าด้วยการตั้งค่าที่หนาแน่นขึ้นเล็กน้อย มันไม่หนาเกินไป ถ้ามันหนาเกินไปคาร์บอนจะถูกสะสมบนพื้นผิวจึงปานกลาง! ในกรณีที่คุณสงสัย... SP Takekawa:HYPERSStageBore Up Kit181cc ในภาพที่เผยแพร่ Injector อยู่ในรายการ และถึงแม้ว่าจะมี Plug in Kit โปรดทราบว่า Injector ไม่ได้รวมอยู่ด้วย! ติดตั้งอย่างระมัดระวังด้วย... เมื่อคุณถอด OEMInjector จะมีน้ำมันเบนซินออกมาบ้าง! เลยไม่มีไฟ! ห้ามบุหรี่ขณะทำงาน! และอย่านำขยะไปแลกหัวฉีด! และไม่ทำร้ายปลายสาย! มันคือ ดูรายละเอียด
แสดงที่มา