บาร์ยึดอเนกประสงค์ FE

  • รหัสสินค้า: 98303

    ฿1,220

    คะแนนวีไบค์: +12 pt

    ข้อมูลการจัดส่ง

    • ระบบกำลังคำนวณวันที่พร้อมจัดส่ง.....
    ถึง ThaiLand
    เปลี่ยน
    เลือกที่อยู่:
    ThaiLand
    ค่าจัดส่ง ฿100

    จำนวน

    สินค้าแท้ 100% รับประกัน 7 วัน รับเงินคืนฟรี ราคาสุทธิ

    ใช้สำหรับรุ่น

    ดูทั้งหมด
    YAMAHA
    XMAX 250 18-21 2BK-SG42J XMAX300

    รายละเอียดสินค้า

    รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

    คุณสมบัติ

    [วัสดุ]
    ・ ส่วนท่อ: เหล็ก /สีดำเสร็จสิ้น
    ・ วงเล็บ: เหล็ก /สีดำเสร็จสิ้น

    ความยาวที่มีประสิทธิภาพของเมาท์: 200 มม.
    ส่วนการติดตั้ง: สต็อก รูยึดกระจก (M10)
    แนวทางการโหลด: 1.0kg

    รายละเอียดคำถาม

    เป็นแบบเหล็กพื้นฐานของแถบยึดหลายแบบ
    มีตัวยึดซึ่งสามารถติดตั้งได้ง่ายด้วยสลักเกลียว
    ใช้ตัวถังและตัวยึดสีดำซึ่งไม่ยืนยันการมีอยู่และฟังก์ชันพื้นฐานที่สามารถติดตั้งสิ่งของต่างๆบนท่อของφ22.2ไม่เปลี่ยนแปลง

    คำเตือน


    ใช้สำหรับรุ่น

    YAMAHA
    XMAX 250 18-21 2BK-SG42J XMAX300

    ทบทวน

    4.3

    / 5

    (15 ทบทวน)

    7

    6

    2

    0

    0

    กรอง:
    เลือกดูจาก:

    multifunctional bracket

    18 Jan 2023
    5.0
    โดย

    MoneyPig

    My motorcycle is YAMAHA NMAX155. I bought this DAYTONA multifunctional handle bracket from webike. It is firmly fixed on the original rearview mirror base. It is fixed with M10 screws. The diameter of the pipe is 22mm, and it can be installed with mobile phone brackets and other accessories. Design Simple and easy to use will not affect riding safety. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. I bought this Daytona multi -function handle stand on Webike. It is fixed on the original rearview mirror seat. It is fixed with the M10 screw. Simple use will not affect cycling  safety. Powered by Google Translator ดูรายละเอียด
    รถมอเตอร์ไซค์ของฉันคือ YAMAHA NMAX155 ฉันซื้อขายึดแฮนด์อเนกประสงค์ DAYTONA จาก webike ติดแน่นบนฐานกระจกมองหลังเดิม ได้รับการแก้ไขด้วยสกรู M10 เส้นผ่านศูนย์กลางของท่อคือ 22 มม. และสามารถติดตั้งกับขายึดโทรศัพท์มือถือและอุปกรณ์เสริมอื่นๆ ได้ การออกแบบที่เรียบง่ายและใช้งานง่ายจะไม่ส่งผลต่อความปลอดภัยในการขับขี่ -------------------------------------------------- -------- รถมอเตอร์ไซค์ของผมคือ YAMAHA NMAX155 ฉันซื้อขาตั้งแฮนด์อเนกประสงค์ Daytona บน Webike ติดตั้งอยู่บนกระจกมองหลังเดิม ได้รับการแก้ไขด้วยสกรู M10 การใช้งานที่เรียบง่ายจะไม่ส่งผลต่อความปลอดภัยในการขี่จักรยาน ขับเคลื่อนโดย Google นักแปล ดูรายละเอียด
    แสดงที่มา

    It's convenient

    23 Sep 2021
    5.0
    It is easy to install and very convenient. I have JuiceHolder, Smartphone Holder and USB power supply. ดูรายละเอียด
    ติดตั้งง่ายและสะดวกมาก ฉันมี JuiceHolder ที่วางสมาร์ทโฟน และแหล่งจ่ายไฟ USB ดูรายละเอียด
    แสดงที่มา

    I used it for VMAX.

    11 Mar 2021
    4.0
    I bought it because it seems to be able to be installed in VMAX when I measure the size though it is NMAX. there is a little obstacle because there is no product of this type for VMAX, but it is easy to see when I use a smartphone as Navigation. The difficulty may be that it is difficult to see the indicators on the Tank depending on the lighting position. ดูรายละเอียด
    ฉันซื้อมันเพราะดูเหมือนว่าจะสามารถติดตั้งใน VMAX ได้เมื่อฉันวัดขนาดแม้ว่าจะเป็น NMAX มีสิ่งกีดขวางเล็กน้อยเพราะไม่มีผลิตภัณฑ์ประเภทนี้สำหรับ VMAX แต่ดูง่ายเมื่อใช้สมาร์ทโฟนเป็นการนำทาง ความยากลำบากอาจเป็นไปได้ว่าเป็นเรื่องยากที่จะเห็นสัญญาณบอกสถานะบนถังน้ำมัน ทั้งนี้ขึ้นอยู่กับตำแหน่งไฟส่องสว่าง ดูรายละเอียด
    แสดงที่มา

    More breadth!

    27 Feb 2021
    5.0
    PCX125 (JF28) When I tried to install the clicker of the smartphone mount to the handlebar, I could not install it because there was not enough room for the shape of the handlebar and clearance.
    So I bought this one to install a clicker.

    Clicker:https://www.webike.net/sd/24189214/

    [How is it used?

    In use.

    Was the one you received as per Image?

    It was just as Image.
    The texture is appropriate for the price.
    The rigidity is also sufficient.

    Was the installation difficult?

    It was very easy.

    How was your experience with it?

    I was able to fix the clicker with no problem.
    It's been in place for about a month, but the Screw hasn't loosened, and it's fixed.

    [Included Parts:were they on?

    It was attached properly.

    [Was there anything that disappointed you?

    Nothing in particular.

    Other items that would be helpful

    Point and hang of installation
    It was only to remove the screw under the front of Master Cylinder which is easy to access, and to bite the Adapter there.
    It is more efficient if you tighten the screw on the Mount bar side a little first so that it doesn't bran.
    It takes less than 10 minutes to Bolt On, but you will need a Hexagonal Wrench and a Hexagonal Spanner.

    [Availability and clarity of the Instruction Manual
    Instruction Manual is attached properly.
    I can kind of tell just by the product.

    [Notes]
    In this kind of product, the paint often peels off from the part where Gold genus and Gold genus touch each other, and RedRust occurs from there. I don't see any sign of it after a month or two, but I think it will last a long time if you spray it with Rust Stopper from time to time.

    The Mount Bar Body is the same, but the Bracket Only is different.
    If you don't mind a little Gap, or if you use a Universal Bracket from Home center or 100 yen, you can install it on various cars.
    ดูรายละเอียด
    PCX125 (JF28) เมื่อฉันพยายามติดตั้งตัวคลิกของตัวยึดสมาร์ทโฟนเข้ากับแฮนด์จับ ฉันไม่สามารถติดตั้งได้เนื่องจากไม่มีที่ว่างเพียงพอสำหรับรูปทรงของแฮนด์บาร์และระยะห่าง
    ดังนั้นฉันจึงซื้ออันนี้เพื่อติดตั้งตัวคลิก

    คลิกเกอร์:https://www.webike.net/sd/24189214/

    [ใช้ยังไง?

    ในการใช้งาน

    เป็นคนที่คุณได้รับตามภาพหรือไม่?

    มันก็เหมือนกับ Image
    เนื้อสัมผัสเหมาะสมกับราคา
    ความแข็งแกร่งก็เพียงพอแล้ว

    การติดตั้งทำได้ยากหรือไม่?

    มันง่ายมาก

    ประสบการณ์ของคุณกับมันเป็นอย่างไร?

    ฉันสามารถแก้ไข clicker ได้โดยไม่มีปัญหา
    มันเข้าที่ประมาณหนึ่งเดือนแล้ว แต่สกรูยังไม่คลายและก็ซ่อมแล้ว

    [รวมอะไหล่: พวกเขาเปิด?

    มันถูกแนบมาอย่างถูกต้อง

    [มีอะไรที่ทำให้คุณผิดหวังไหม?

    ไม่มีอะไรเป็นพิเศษ

    รายการอื่นๆ ที่จะเป็นประโยชน์

    จุดและแฮงค์ของการติดตั้ง
    เป็นเพียงการถอดสกรูที่อยู่ใต้ด้านหน้าของกระบอกสูบหลักซึ่งเข้าถึงได้ง่ายและกัดอะแดปเตอร์ที่นั่นเท่านั้น
    จะมีประสิทธิภาพมากกว่าถ้าคุณขันสกรูที่ด้านแถบยึดให้แน่นก่อนเล็กน้อยก่อนเพื่อไม่ให้รำ
    ใช้เวลาน้อยกว่า 10 นาทีในการโบลต์ออน แต่คุณจะต้องใช้ประแจหกเหลี่ยมและประแจหกเหลี่ยม

    [ความพร้อมใช้งานและความชัดเจนของคู่มือการใช้งาน
    แนบคู่มือการใช้งานมาให้เรียบร้อย
    ฉันสามารถบอกได้จากผลิตภัณฑ์

    [หมายเหตุ]
    ในผลิตภัณฑ์ประเภทนี้ สีมักจะลอกออกจากส่วนที่สกุลทองและสกุลทองสัมผัสกัน และเกิดสนิมแดงจากที่นั่น ฉันไม่เห็นสัญญาณใด ๆ ของมันหลังจากผ่านไปหนึ่งหรือสองเดือน แต่ฉันคิดว่ามันคงจะใช้เวลานานถ้าคุณพ่นด้วย Rust Stopper เป็นครั้งคราว

    Mount Bar Body เหมือนกัน แต่ Bracket Only ต่างกัน
    หากคุณไม่สนใจช่องว่างเล็ก ๆ น้อย ๆ หรือถ้าคุณใช้ Universal Bracket จาก Home center หรือ 100 เยน คุณสามารถติดตั้งบนรถหลายคันได้
    ดูรายละเอียด
    แสดงที่มา

    Digimono Mount Bar

    24 Jan 2021
    4.0
    Most of the electronic device mounts are designed to be mounted on the handlebar of a large body. However, when it comes to scooters for commuting, it is difficult to mount them because the handlebar is not exposed.

    Quantity:Pair (for Left and Right) The Mount bar has a wide range and can be used to mount a variety of objects because it is mounted as a bridge to the Mirror section of the
    I only have the USB power supply out and the phone mount on mine, but I think I could still put something on one or two of them.

    As noted above, Mirror hall's Quantity:Pair (for Left and Right) The bar is positioned to bridge the gap between the two, so it can be mounted anywhere it is easy to see.

    In addition, the Scooter that I own is a little unusual type of car, and naturally, there was no fitment, so I diverted for other types of car. The product itself is a simple bar, so if you measure the angle of the screw fastening part and the length of the bar body, the diversion itself was not so difficult.
    ดูรายละเอียด
    ที่ยึดอุปกรณ์อิเล็กทรอนิกส์ส่วนใหญ่ได้รับการออกแบบให้ติดตั้งบนแฮนด์จับของตัวเครื่องขนาดใหญ่ อย่างไรก็ตาม เมื่อพูดถึงสกู๊ตเตอร์สำหรับการเดินทาง การติดตั้งนั้นยากเพราะว่าแฮนด์รถไม่ได้เปิดออก

    จำนวน: คู่ (สำหรับซ้ายและขวา) แถบ Mount มีหลากหลายและสามารถใช้ยึดวัตถุได้หลากหลายเนื่องจากติดตั้งเป็นสะพานเชื่อมไปยังส่วนกระจกของ
    ฉันมีแหล่งจ่ายไฟ USB ออกและติดตั้งโทรศัพท์ไว้เท่านั้น แต่ฉันคิดว่าฉันยังสามารถใส่บางอย่างบนตัวใดตัวหนึ่งหรือสองตัวได้

    ตามที่กล่าวไว้ข้างต้น จำนวน: คู่ของ Mirror Hall (สำหรับซ้ายและขวา) แถบนี้อยู่ในตำแหน่งที่เชื่อมช่องว่างระหว่างทั้งสอง ดังนั้นจึงสามารถติดตั้งได้ทุกที่ที่มองเห็นได้ง่าย

    นอกจากนี้ Scooter ที่ฉันเป็นเจ้าของนั้นเป็นรถประเภทแปลก ๆ เล็กน้อย และแน่นอนว่าไม่มีอุปกรณ์ประกอบ ดังนั้นฉันจึงเปลี่ยนใจไปหารถประเภทอื่น ผลิตภัณฑ์นั้นเป็นแท่งธรรมดา ดังนั้นหากคุณวัดมุมของส่วนยึดสกรูและความยาวของตัวแท่ง การเบี่ยงเบนนั้นก็ไม่ยาก
    ดูรายละเอียด
    แสดงที่มา

    สินค้าที่ดูก่อนหน้า

    มีสินค้าในสต๊อกพร้อมจัดส่ง

    สินค้าแนะนำ

    สินค้าที่เกี่ยวข้อง

    สินค้าแนะนำ

    สินค้าที่ดูล่าสุด

    New Custom Article

    ดูทั้งหมด