- หน้าแรก
- อะไหล่แต่ง
- แฮนค์/อะไหล่แฮนค์
- อะไหล่ชุดคอนโทรล
- แฮนด์อุ่น
- KOSO
- KOSO: ปลอกแฮนด์ KOSO x KN Multi Heater
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[ขนาด]ปรับตั้งได้ 5 ระดับ/120/125/130มม. ความกว้าง
[สภาพการติด]
ความกว้างด้ามจับ 120มม./125มม./130มม. รถจักรยานยนต์
แม้แต่รถจักรยานยนต์ มีเส้นผ่านศูนย์กลางแฮนด์บาร์ 22.2 มม.
รถแบตเตอรี่ DC12V
เส้นผ่านศูนย์กลางภายในของกริปด้านซ้าย 22.2 มม.
เส้นผ่านศูนย์กลางภายในของกริปด้านขวา 26.0 มม. [Size]
With 5-step adjustment / 120, 125, 130mm width
[Requirements for installation]
Bikes with 120mm / 125mm / 130mm grip width
Even on a motorcycle, the handlebar diameter is 22.2mm
DC12V Battery Vehicles
Left grip inner diameter 22.2mm
Right grip inner diameter 26.0mm
รายละเอียดคำถาม
เป็นเครื่องทำความร้อนแบบยึดเกาะรุ่นใหม่ที่เกิดจากการพัฒนาร่วมกันระหว่าง KOSO และ KN Project
ขณะนี้สามารถปรับละเอียดได้ทีละ 5 มม. ด้วยผลิตภัณฑ์นี้
ขณะนี้สามารถปรับได้ถึง 120 มม./ ช่วง 125 มม./130 มม. เพื่อรองรับความยืดหยุ่น เช่น การเปลี่ยนไปใช้สวิตช์แฮนด์บาร์หลังการขาย ฯลฯ
สามารถเป็นแบบสองทางหรือไม่ผ่านก็ได้เพราะมาพร้อมฝาปิดท้าย This is a new grip heater that was jointly developed by KOSO and KN planning.
With this product, fine adjustment in 5mm increments is available.
It can be adjusted within the range of 120mm / 125mm / 130mm in case of changing to aftermarket products such as handlebar switches.
With an end cap, it can be used in two ways: through-hole type or non-through-hole type.
ขณะนี้สามารถปรับละเอียดได้ทีละ 5 มม. ด้วยผลิตภัณฑ์นี้
ขณะนี้สามารถปรับได้ถึง 120 มม./ ช่วง 125 มม./130 มม. เพื่อรองรับความยืดหยุ่น เช่น การเปลี่ยนไปใช้สวิตช์แฮนด์บาร์หลังการขาย ฯลฯ
สามารถเป็นแบบสองทางหรือไม่ผ่านก็ได้เพราะมาพร้อมฝาปิดท้าย This is a new grip heater that was jointly developed by KOSO and KN planning.
With this product, fine adjustment in 5mm increments is available.
It can be adjusted within the range of 120mm / 125mm / 130mm in case of changing to aftermarket products such as handlebar switches.
With an end cap, it can be used in two ways: through-hole type or non-through-hole type.
คำเตือน
*ไม่สามารถติดตั้งกับแฮนด์บาร์ขนาด 1 นิ้ว เช่น JOKER 50/90 ได้*ไม่สามารถใช้กับรถขนาดเส้นผ่านศูนย์กลาง 19 มม. เช่น ADDRESS 110 และ V100
*โปรดตรวจสอบให้แน่ใจว่าได้เชื่อมต่อกับ จ่ายไฟก่อนทำการติดตั้ง และตรวจดูว่ากริปอุ่นขึ้นหรือไม่
*โปรดติดกริปหลังจากที่ทำให้อุณหภูมิของกริปแข็งแรงขึ้นเป็นเวลา 10-20 นาทีเป็นสองเท่าเพื่อยืนยันการทำงาน (ตัวด้ามจับมีความยืดหยุ่นและใช้งานง่าย)
*ฟังก์ชันการตรวจจับแรงดันตกได้รับการติดตั้ง ไฟ LED ดวงเดียวเท่านั้นที่กะพริบเมื่อตรวจพบ นี่ไม่ใช่ความผิดปกติ *Installation on 1 inch handlebars such as JOKER50 / 90 is not possible.
*Cannot be used for 19mm diameter vehicles such as Address 110 and Address V100.
*Please make sure that the grip is warmed up by connecting it to the power supply before installation.
*Please turn the grip temperature to high for 10-20 minutes to check the operation before attaching the grip.(The grip body becomes more flexible and easy to work with).
*It is equipped with a voltage drop detection function.When it is detected, only one LED is blinking.It's not a malfunction.
ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/