ปลอกแฮนด์อุ่น 360 B

  • รหัสสินค้า: Q5KYSK063Y41

    ฿6,209

    คะแนนวีไบค์: +124 pt

    ข้อมูลการจัดส่ง

    • ระบบกำลังคำนวณวันที่พร้อมจัดส่ง.....
    ถึง ThaiLand
    เปลี่ยน
    เลือกที่อยู่:
    ThaiLand
    ค่าจัดส่ง ฿100

    จำนวน

    สินค้าแท้ 100% รับประกัน 7 วัน รับเงินคืนฟรี ราคาสุทธิ

    ใช้สำหรับรุ่น

    ดูทั้งหมด
    YAMAHA
    FZ1-N(FZ1) 08-12 1EC7 FZ1-N(FZ1) 08-12 1EC8 FZ1-N(FZ1) 08-12 2D1A FZ1-N(FZ1) 08-12 2D1X FZ1-S(FZ1 FAZER) 06-14 (1CA8)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (1CAJ)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (1CAN)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (1CAT)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (1CAU)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (1CAV)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (2DV2)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. In this case, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (2DV7)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (2DV8)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (3C3G)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (3C3W)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. MT-03 16-21 (B042)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-03 16-21 (B045)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-03 16-21 (B051)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-03 16-21 (B055)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-03 16-21 (B0B1)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-03 16-21 (B0B2)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-03 16-21 (B1E1)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlight is on due to specifications. MT-03 16-21 (B1E2)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlight is on due to specifications. MT-25 16-21 (B042)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-25 16-21 (B045)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-25 16-21 (B051)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-25 16-21 (B055)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-25 16-21 (B0B1)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-25 16-21 (B0B2)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-25 16-21 (B1E1)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlight is on due to specifications. MT-25 16-21 (B1E2)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlight is on due to specifications. VMAX 09-17 (2CEF)* The grip warmer sub-harness (lead wire connecting to H/L relay) needs to be cut and extended by about 1m. VMAX 09-17 (2CEK)*The grip warmer sub-harness (lead wire connecting to H/L relay) needs to be cut and extended by about 1m. VMAX 09-17 (2CEP)*The grip warmer sub-harness (lead wire connecting to H/L relay) needs to be cut and extended by about 1m. VMAX 09-17 (2CEU)*The grip warmer sub-harness (lead wire connecting to H/L relay) needs to be cut and extended by about 1m. VMAX 09-17 (2S37)*The grip warmer sub-harness (lead wire connecting to H/L relay) needs to be cut and extended by about 1m. VMAX 09-17 (2S3T)*The grip warmer sub-harness (lead wire connecting to H/L relay) needs to be cut and extended by about 1m. VMAX 09-17 (2S3V)*The grip warmer sub-harness (lead wire connecting to H/L relay) needs to be cut and extended by about 1m. XVS250(DS250) 00-17 (19D1)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D2)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D3)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D4)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D5)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D6)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D7)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D8)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D9)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19DA)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19DB)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KR1)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KR4)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KR7)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KRB)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KRD)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KRF)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KRG)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KRJ)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. YZF-R25 15-21 (1WD2) *One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25 15-21 (1WD6)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25 15-21 (1WD8)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25 15-21 (1WDB)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25 15-21 (1WDD)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25 15-21 (1WDG)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25 15-21 (2WD1)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are YZF-R25 15-21 (2WD3)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25 15-21 (2WD5)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25 15-21 (B021)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25 15-21 (B029)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25 15-21 (B02J)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25 15-21 (B02N)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25 15-21 (B0E1)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25 15-21 (BR55)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25 15-21 (BS81)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25A 15-21 (1WD2) *One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25A 15-21 (1WD6)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25A 15-21 (1WD8)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25A 15-21 (1WDB)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25A 15-21 (1WDD)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25A 15-21 (1WDG)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25A 15-21 (2WD1)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are YZF-R25A 15-21 (2WD3)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25A 15-21 (2WD5)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25A 15-21 (B021)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25A 15-21 (B029)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25A 15-21 (B02J)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25A 15-21 (B02N)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25A 15-21 (B0E1)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25A 15-21 (BR55)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25A 15-21 (BS81)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R3A 15-21 (1WD2) *One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R3A 15-21 (1WD6)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R3A 15-21 (1WD8)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R3A 15-21 (1WDB)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R3A 15-21 (1WDD)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R3A 15-21 (1WDG)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R3A 15-21 (2WD1)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are YZF-R3A 15-21 (2WD3)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R3A 15-21 (2WD5)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R3A 15-21 (B021)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R3A 15-21 (B029)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R3A 15-21 (B02J)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R3A 15-21 (B02N)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R3A 15-21 (B0E1)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R3A 15-21 (BR55)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R3A 15-21 (BS81)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is MT-03 MT03 YZF-R3 MT-03 MT03 YZF-R3
    แสดงเพิ่มเติม

    รายละเอียดสินค้า

    รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

    คุณสมบัติ

    [หมายเลขอะไหล่จากทางผู้ผลิต] Q5K-YSK-063-Y41

    รายละเอียดคำถาม

    จับถนัดมือในช่วงฤดูหนาว!
    ออกแบบมาเฉพาะสำหรับรถ Yamaha เพื่อให้ติดตั้งง่ายโดยไม่ต้องดัดแปลงสายไฟของรถ

    [ภาพรวมผลิตภัณฑ์]
    ออกแบบมาเฉพาะสำหรับรถ Yamaha เพื่อการติดตั้งที่ง่ายโดยไม่ต้องดัดแปลงสายไฟของรถ
    กริปทำความร้อนเส้นผ่านศูนย์กลางเล็กที่สุดในโลก
    ส่วนประกอบความร้อนสแตนเลสที่ให้ความร้อนสม่ำเสมอมีความทนทานสูง ..
    การตั้งค่าเอาต์พุตปุ่มกด 3 ขั้นตอนง่ายๆ: Hi, Mid และ Lo (แต่ละระดับเอาต์พุตสามารถเปลี่ยนแปลงได้ทีละ 10%)
    การปรับเอาต์พุตเครื่องทำความร้อนอัตโนมัติตามแรงดันไฟฟ้าของแบตเตอรี่
    การออกแบบที่เชื่อถือได้พร้อมการป้องกันแบตเตอรี่

    คำเตือน

    * โปรดสวมถุงมือเมื่อใช้เครื่องอุ่นกริป
    * โปรดอย่าใช้การตั้งค่าเอาต์พุตที่อุ่นขึ้นของกริปสูงเมื่ออุณหภูมิของอากาศภายนอกอยู่ที่ 20 องศาขึ้นไป
    * โปรดเปลี่ยนกริปและหยุดใช้กริปที่อุ่นขึ้นหากกริปสึกหรือเสียหาย

    * สำหรับ R3 / 25 จำเป็นต้องใช้สลักเกลียวสำหรับการติดตั้งตัวยึดแยกต่างหาก
    * โปรดใช้งานคอนโทรลเลอร์หลังจาก R3 / 25 / MT - 03/25 สตาร์ทเครื่องยนต์
    * โปรดเตรียมแยกต่างหากสำหรับกาวยางที่ต้องใช้เมื่อติดกริปด้านซ้ายเข้ากับแฮนด์

    ใช้สำหรับรุ่น

    YAMAHA
    FZ1-N(FZ1) 08-12 1EC7 FZ1-N(FZ1) 08-12 1EC8 FZ1-N(FZ1) 08-12 2D1A FZ1-N(FZ1) 08-12 2D1X FZ1-S(FZ1 FAZER) 06-14 (1CA8)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (1CAJ)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (1CAN)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (1CAT)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (1CAU)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (1CAV)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (2DV2)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. In this case, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (2DV7)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (2DV8)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (3C3G)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. FZ1-S(FZ1 FAZER) 06-14 (3C3W)* Since the controller cannot be mounted on the mirror boss, please mount it on the handlebar cover, side panel, etc. At that time, drilling is required at the mounting location for lead wire routing. MT-03 16-21 (B042)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-03 16-21 (B045)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-03 16-21 (B051)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-03 16-21 (B055)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-03 16-21 (B0B1)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-03 16-21 (B0B2)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-03 16-21 (B1E1)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlight is on due to specifications. MT-03 16-21 (B1E2)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlight is on due to specifications. MT-25 16-21 (B042)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-25 16-21 (B045)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-25 16-21 (B051)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-25 16-21 (B055)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-25 16-21 (B0B1)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-25 16-21 (B0B2)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are on due to specifications. MT-25 16-21 (B1E1)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlight is on due to specifications. MT-25 16-21 (B1E2)*Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlight is on due to specifications. VMAX 09-17 (2CEF)* The grip warmer sub-harness (lead wire connecting to H/L relay) needs to be cut and extended by about 1m. VMAX 09-17 (2CEK)*The grip warmer sub-harness (lead wire connecting to H/L relay) needs to be cut and extended by about 1m. VMAX 09-17 (2CEP)*The grip warmer sub-harness (lead wire connecting to H/L relay) needs to be cut and extended by about 1m. VMAX 09-17 (2CEU)*The grip warmer sub-harness (lead wire connecting to H/L relay) needs to be cut and extended by about 1m. VMAX 09-17 (2S37)*The grip warmer sub-harness (lead wire connecting to H/L relay) needs to be cut and extended by about 1m. VMAX 09-17 (2S3T)*The grip warmer sub-harness (lead wire connecting to H/L relay) needs to be cut and extended by about 1m. VMAX 09-17 (2S3V)*The grip warmer sub-harness (lead wire connecting to H/L relay) needs to be cut and extended by about 1m. XVS250(DS250) 00-17 (19D1)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D2)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D3)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D4)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D5)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D6)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D7)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D8)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19D9)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19DA)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (19DB)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KR1)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KR4)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KR7)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KRB)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KRD)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KRF)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KRG)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. XVS250(DS250) 00-17 (5KRJ)*The grip end position may need to be adjusted with washers (90201-06066) so that the throttle returns smoothly. YZF-R25 15-21 (1WD2) *One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25 15-21 (1WD6)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25 15-21 (1WD8)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25 15-21 (1WDB)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25 15-21 (1WDD)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25 15-21 (1WDG)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25 15-21 (2WD1)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are YZF-R25 15-21 (2WD3)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25 15-21 (2WD5)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25 15-21 (B021)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25 15-21 (B029)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25 15-21 (B02J)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25 15-21 (B02N)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25 15-21 (B0E1)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25 15-21 (BR55)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25 15-21 (BS81)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25A 15-21 (1WD2) *One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25A 15-21 (1WD6)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25A 15-21 (1WD8)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25A 15-21 (1WDB)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25A 15-21 (1WDD)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25A 15-21 (1WDG)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R25A 15-21 (2WD1)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are YZF-R25A 15-21 (2WD3)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25A 15-21 (2WD5)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25A 15-21 (B021)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25A 15-21 (B029)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25A 15-21 (B02J)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25A 15-21 (B02N)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25A 15-21 (B0E1)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R25A 15-21 (BR55)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R25A 15-21 (BS81)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R3A 15-21 (1WD2) *One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R3A 15-21 (1WD6)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R3A 15-21 (1WD8)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R3A 15-21 (1WDB)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R3A 15-21 (1WDD)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R3A 15-21 (1WDG)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. *Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights are YZF-R3A 15-21 (2WD1)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine because the grip warmer will not be supplied power unless the headlights are YZF-R3A 15-21 (2WD3)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R3A 15-21 (2WD5)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R3A 15-21 (B021)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R3A 15-21 (B029)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R3A 15-21 (B02J)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R3A 15-21 (B02N)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R3A 15-21 (B0E1)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is YZF-R3A 15-21 (BR55)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlights ar YZF-R3A 15-21 (BS81)*One bolt (97027-10014) is separately required to attach the controller mounting bracket to the mirror boss. **Please operate the controller after starting the engine, because the grip warmer will not be supplied power unless the headlight is MT-03 MT03 YZF-R3 MT-03 MT03 YZF-R3
    แสดงเพิ่มเติม

    ทบทวน

    4.5

    / 5

    (2 ทบทวน)

    1

    1

    0

    0

    0

    กรอง:
    เลือกดูจาก:

    It is a wonderful piece of incongruity Zero.

    16 Mar 2018
    5.0
    <Background of introduction>
    As we have been considering introducing Grip heater every year so far, I did not want to get thicker by all means.
    Honda's Sports Grip Heater is expensive and its fitting diameter and Heater part is Hondafor Vehicle so it is not compatible.
    In such a place YAMAHAfor Vehicle to Y's Gear from this product from the release, cold weather in winter this year, if you buy now
    Buy with Timing Kana.

    When installing, since it is made into YAMAHAfor Vehicle basically Bolt-on Design.
    For VMAX 1700, 360 B is compatible, but we want to interrupt the Headlight Relay's Coupler to take power
    Extension processing required (Because the Relay position is within Tail cowl, it does not reach it). However, cutting both ends to create extension Wiring
    I think that it is an easy class because it is only.

    Right SideGrip is easy to replace as Throttle Holder as Type.
    I exchanged both grips and tightened the Switch to the Right Side's Mirror Holder, and then pulled 3 Wiring from Relay
    Connect to the Main line, connect Earth to Battery and you're done.. The most difficult thing was the Wiring walking to eliminate the presence.
    Since VMAX's OEMWiring is gathered wonderfully beautifully, it is hard for Wiring of post-installed electrical equipment.

    And, although it is the function of the essence, it is attached to a word of wonderful.
    The Grip diameter is really the same as the usual Grip and it has no discomfort at all. Also, Heater is a 360 degree type, yet
    It is very good because the temperature of the fingertip part is high. Three-stage temperature setting is 100% at De Fault - 70% - To 50%
    Although it can be changed arbitrarily.

    If you give a strong and dissatisfied part, Grip's "Rubber feeling" Is inferior to without Heater.
    However, this built-in Heater and Grip diameter as OEM same etc. It is inevitable because it is inescapable.

    For a person who is riding a YAMAHA car, I absolutely dislike wanting to attach a Grip heater, but this is the only one!
    This Recommendation.
    ดูรายละเอียด
    <เบื้องหลังของการแนะนำ>
    เนื่องจากเราพิจารณาที่จะแนะนำเครื่องทำความร้อนแบบด้ามจับทุกปีจนถึงขณะนี้ ฉันไม่ต้องการที่จะหนาขึ้นในทุกวิถีทาง
    Sports Grip Heater ของ Honda มีราคาแพงและเส้นผ่านศูนย์กลางที่เหมาะสมและชิ้นส่วนเครื่องทำความร้อนคือ Hondafor Vehicle ดังนั้นจึงใช้ร่วมกันไม่ได้
    ในสถานที่ดังกล่าว YAMAHA สำหรับยานพาหนะถึงเกียร์ของ Y จากผลิตภัณฑ์นี้ตั้งแต่เปิดตัวอากาศหนาวในฤดูหนาวปีนี้หากคุณซื้อตอนนี้
    ซื้อกับ Timing Kana

    เมื่อทำการติดตั้ง เนื่องจากมันถูกทำให้เป็น YAMAHA สำหรับรถยนต์โดยทั่วไปแล้ว Bolt-on Design
    สำหรับ VMAX 1700 รองรับ 360 B แต่เราต้องการขัดจังหวะ Coupler ของรีเลย์ไฟหน้าเพื่อใช้พลังงาน
    ต้องใช้การประมวลผลส่วนขยาย (เนื่องจากตำแหน่งรีเลย์อยู่ภายในฝาครอบท้ายรถจึงไปไม่ถึง) อย่างไรก็ตามการตัดปลายทั้งสองข้างเพื่อสร้างการต่อสายไฟ
    ฉันคิดว่ามันเป็นคลาสที่ง่ายเพราะมันเป็นเพียง

    Right SideGrip นั้นง่ายต่อการเปลี่ยนเหมือนกับ Throttle Holder เป็น Type
    ฉันเปลี่ยนที่จับทั้งสองและขันสวิตช์ไปที่ตัวยึดกระจกด้านขวาแล้วดึงสายไฟ 3 เส้นออกจากรีเลย์
    เชื่อมต่อกับสายหลัก เชื่อมต่อ Earth กับแบตเตอรี่ เท่านี้ก็เรียบร้อย.. สิ่งที่ยากที่สุดคือการเดินสายไฟเพื่อกำจัดการมีอยู่
    เนื่องจาก OEMWiring ของ VMAX มีการรวบรวมไว้อย่างสวยงาม จึงเป็นเรื่องยากสำหรับการเดินสายของอุปกรณ์ไฟฟ้าหลังการติดตั้ง

    และถึงแม้ว่ามันจะเป็นหน้าที่ของแก่นแท้ แต่ก็ติดอยู่กับคำวิเศษณ์
    เส้นผ่านศูนย์กลางของกริปนั้นเหมือนกับกริปปกติและไม่รู้สึกอึดอัดเลย นอกจากนี้ Heater ยังเป็นแบบ 360 องศาอีกด้วย
    ดีมากเพราะอุณหภูมิของปลายนิ้วอยู่ในระดับสูง การตั้งค่าอุณหภูมิสามขั้นตอนคือ 100% ที่ De Fault - 70% - ถึง 50%
    แม้ว่าจะสามารถเปลี่ยนแปลงได้โดยพลการ

    หากคุณให้ส่วนที่แข็งแกร่งและไม่พอใจ "ความรู้สึกยาง" ของ Grip นั้นด้อยกว่าการไม่มีฮีตเตอร์
    อย่างไรก็ตามขนาดเส้นผ่านศูนย์กลาง Heater และ Grip ในตัวเช่นเดียวกับ OEM ฯลฯ เป็นสิ่งที่หลีกเลี่ยงไม่ได้เพราะหลีกเลี่ยงไม่ได้

    สำหรับคนที่ขี่รถ YAMAHA ไม่อยากติดเครื่องทำความร้อนแบบกริป แต่คันนี้ตัวเดียว!
    คำแนะนำนี้
    ดูรายละเอียด
    แสดงที่มา

    It's not as thick as NORMAL

    06 Jan 2018
    4.0
    About five years ago, I'm using Grip heater.
    It is necessary to use Motorcycle even for commuting, so it is no longer necessary.

    To the Motorcycle which we have switched so far,
    - DAYTONA's Hot grip Standard
    - Non Brand Made in Taiwan
    - Honda's Sports Grip Heater

    I have been using. Honda's switch integrated design and narrowness with no sense of incongruity were great, but that is expensive anyway ....

    I tried choosing Grip warmer 360 made by Y's Gear for a rare car called YAMAHA exciter now that replaced it for Season!

    Making is close to Honda's masterpieces, Sports Grip Heater,
    Grip thickness (Thinness) Is exactly the same as NORMAL.

    This is a terrible thing.
    Oddness, Zero.

    In order to realize the fineness to the limit Right Side is integrally molded with the Throttle tube, conforming models are limited and universality is not guaranteed, but Type B (For YZF-R25) Diverted to exciter Challenge.

    Honda's Sports GripHeater also sees blogs diverted to each Manufacturer vehicle other than Honda, but I think that this Yamaha will also have diversion information in the future.


    , The function is perfect.
    When used in conjunction with Handlebar Cover it is hot, weak MODE is enough.
    Switch is a separate body and comes with Bracket which ties together with Mirror etc.
    I felt it was not good, so I made a little processing on the chassis side.

    I hope you find it useful.
    ดูรายละเอียด
    ประมาณห้าปีที่แล้ว ฉันใช้เครื่องทำความร้อนแบบกริป
    จำเป็นต้องใช้รถจักรยานยนต์แม้ในขณะเดินทางจึงไม่จำเป็นอีกต่อไป

    สู่มอเตอร์ไซค์ที่เราได้เปลี่ยนมาจนถึงตอนนี้
    - มาตรฐานด้ามจับร้อนของ DAYTONA
    - ไม่ใช่แบรนด์ที่ผลิตในไต้หวัน
    - เครื่องทำความร้อนแบบสปอร์ตของ Honda

    ใช้แล้วค่ะ. การออกแบบบูรณาการสวิตช์ของฮอนด้าและความแคบที่ไม่มีความรู้สึกไม่ลงรอยกันนั้นยอดเยี่ยม แต่ก็มีราคาแพงอยู่ดี ....

    ฉันพยายามเลือก Grip warmer 360 ที่ผลิตโดย Y's Gear สำหรับรถหายากที่ชื่อว่า YAMAHA exciter ซึ่งตอนนี้มาแทนที่สำหรับ Season!

    การผลิตใกล้เคียงกับผลงานชิ้นเอกของฮอนด้า Sports Grip Heater
    ความหนาของกริป (Thinness) เท่ากันทุกประการกับ NORMAL

    นี่คือสิ่งที่แย่มาก
    ความแปลกประหลาด, ศูนย์.

    เพื่อให้ทราบถึงความวิจิตรถึงขีดจำกัด ด้านขวาถูกหล่อหลอมรวมเข้ากับท่อคันเร่ง โมเดลที่สอดคล้องนั้นมีจำนวนจำกัดและไม่รับประกันความเป็นสากล แต่ Type B (สำหรับ YZF-R25) ได้เปลี่ยนเส้นทางไปสู่ความท้าทายที่ตื่นเต้นเร้าใจ

    Sports GripHeater ของ Honda ยังเห็นบล็อกที่เปลี่ยนเส้นทางไปยังรถยนต์ของผู้ผลิตแต่ละรายนอกเหนือจาก Honda แต่ฉันคิดว่า Yamaha คันนี้จะมีข้อมูลการเบี่ยงเบนความสนใจในอนาคตด้วย


    ,ฟังก์ชั่นครบครัน.
    เมื่อใช้ร่วมกับ Handlebar Cover จะร้อน MODE อ่อนก็เพียงพอ
    สวิตช์เป็นตัวเครื่องที่แยกจากกันและมาพร้อมกับขายึดที่ผูกกับกระจก ฯลฯ
    ฉันรู้สึกว่ามันไม่ดี ฉันจึงทำการประมวลผลเล็กน้อยที่ด้านแชสซี

    ฉันหวังว่าคุณพบว่ามีประโยชน์.
    ดูรายละเอียด
    แสดงที่มา

    สินค้าที่ดูก่อนหน้า

    มีสินค้าในสต๊อกพร้อมจัดส่ง

    สินค้าแนะนำ

    สินค้าที่เกี่ยวข้อง

    สินค้าแนะนำ

    สินค้าที่ดูล่าสุด