หน้าแรก

【DAYTONA】[อะไหล่เสริมสำหรับกล้องติดรถ DDR-S100] แท่นยึดติดตั้ง [DORAREKO]

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿1,171
คะแนนวีไบค์: 12

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

สำหรับกล้องบันทึกการขับขี่ DDR-S100
วัสดุ: อลูมิเนียม

[รายละเอียดสินค้า]

DriveRecorder - วัสดุสำหรับ DDR-S100: AluminiumMount
แข็งแรงและปลอดภัยกว่าตัวยึดพลาสติกที่รวมอยู่ใน KIT ..
ทิศทางของกล้องสามารถปรับมุมได้ดี ..

รีวิวสินค้า

    I dropped out during this long touring. The cause is loosening of the thread of the round mount part in the photograph. This creates structural defects. Clearly saying is the Objection thing. Moreover, it is necessary to unscrew the outer Small Screw in 4 places and completely remove it, the screw can not be stopped. Who thought of this structure? I doubt the idea of ??the person in charge. It is not considered at all to relax by vibration. Moreover, it rusts quickly and the quality is also not good. With such a thing | 3,000 is based on fraud etc. Yes!. After all I am convenient Quantity : 2pc. Set I bought Screw 1 pc. Three eyes disappear while driving, Quantity : 2pc. Set eyes also this time, 1pc. died. In addition it will become rusty and difficult to remove. Everyone, you should not buy this Mount. Camera itself is not bad, but you can not use it unless you take measures against each other, including Mount that follows. For the time being I will paint the loosening stop.

    What became the deciding factor of purchase? Because there was concern about the enclosed Mount.
    How was it actually used? A bit subtle.
    Was it difficult to install? It is a premise to attach to Mirror, so I suffer.
    Please tell me the installation point and hang Necessary to devise other than Mirror.
    Is there anything I was disappointed with? Is the screw weak. Tighten as soon as you over-tighten. Small screw for fixing is easy to loosen. Because it dropped loose on the way and it was already 1 pc. bought.
    Hope for Manufacturer - Please tell me if there are any improvements Please let me think about mounting screw mounting a little more. It is strong compared to Standard's Bracket, but I also want you to consider things such as theft. Price is high. Do not you know why Mirror is premised?
    Do you have products that you compare? There is no other choice.

    I bought this because it seemed easy to be stolen at the attached attached mount.

    Since our L-shaped Bracket can not be installed in our Motorcycle, KIJIMA's Tech mount (TM-31001) I attached it to the pan head.

    It is not a usage method assumed by Manufacturer, but if it becomes reference for something - - -

    Loosen the Screw first, remove the inner round part and the Parts of the butterfly screw as they are Screwed in 2 places.
    We opened 2 holes of 3 mm in the platform of Tech mount and mounted with M3X15Screw, M3Washer, M3Nut separately purchased on the rounded Parts on the inside, fastened the upper part with Screw and completed the installation.

    Hang the Rubber board on Camera, Material : I put it in the frame of Aluminum, but it did not quite get into it and it was quite Large strange.
    After warming up the Rubber for a while, I got into it smoothly.

    Although it took a little time, I could firmly install from the product attached Mount.

    I bought this because it seemed easy to be stolen at the attached attached mount.

    Since our L-shaped Bracket can not be installed in our Motorcycle, KIJIMA's Tech mount (TM-31001) I attached it to the pan head.

    It is not a usage method assumed by Manufacturer, but if it becomes reference for something - - -

    Loosen the Screw first, remove the inner round part and the Parts of the butterfly screw as they are Screwed in 2 places.
    We opened 2 holes of 3 mm in the platform of Tech mount and mounted with M3X15Screw, M3Washer, M3Nut separately purchased on the rounded Parts on the inside, fastened the upper part with Screw and completed the installation.

    Hang the Rubber board on Camera, Material : I put it in the frame of Aluminum, but it did not quite get into it and it was quite Large strange.
    After warming up the Rubber for a while, I got into it smoothly.

    Although it took a little time, I could firmly install from the product attached Mount.

    Mirror Bracket, but because the arm is short and interferes with Mirror there is no degree of freedom of installation. Also easy to lose the small Parts, I have bought a few times again. I hope there are only spare parts for fine Parts.

    Mounted product included, it was not good, so use here.


    In Aluminum Cut-out's Holder and Stainless? LBracket, the rigidity is higher than the Body's attached Mount.



    Installation today, its impressions.

    The angle is also quite flexible,

    Up and down : Because I use 4 Screws, adjustment is troublesome.

    Quantity : Pair (for Left and Right) : I clamp the clamp with Bolt and adjust the angle, but since I am cutting Screw on Clamp's One Side

    It is necessary to confirm in the insertion direction of Body.
    (I thought whether to narrow down with seated Nut before assembly. )
    I think that the L-shaped Bracket is premised as Mirror joint tightening, but it is slightly larger than the M14 size (BodyBracket too) ,
    I think that you need Washer.
    (It is not necessary if it can be accurately installed at Holder center point?)



    "Men" I put together the content I thought, but if you adjust it properly, with Option
    If you have got only Gold
    think.

สินค้าที่มีผู้เข้าชมมากที่สุด

【Driveman:Asahi Research】Driveman BS-10
Driveman BS-10 Driveman:Asahi Research