- หน้าแรก
- เครื่องมือ
- เครื่องมือช่าง
- ประแจขันตัว T
- ประแจขันชนิดอื่น ๆ
- MotionPro
- MotionPro: ประแจบล็อกตัวที
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[ตำแหน่งที่ใช้ / ใช้งานได้ (สำหรับ)] การดูดซับสกรู (เลี้ยวด่วน)[ข้อมูลจำเพาะ] ใช้ร่วมกับบิตสำหรับไดรฟ์หกเหลี่ยม 1/4
[น้ำหนัก] ประมาณ 310g
[วัสดุ]
ส่วนแฮนด์และเพลา : โครเมียมวานาเดียมเหล็กโครเมียม
ส่วนสปินเนอร์ : การประมวลผล Blue Anodized
[ขนาด]
ประมาณ (W) 145x (D) 20x (ซ) 235mm
ความยาวเพลา : 8 นิ้ว (ประมาณ 203 มม.)
[Part / use (-use)] Removing and installing screws (quick turning)
[Specifications] For use with bits for 1/4 hex drives
[Weight] Approx. 310g
[Material]
・Handle & shaft part: Chrome-vanadium steel, chrome finish
・Spinner part: Blue anodized finish
[Size]
Approx. (W) 145 x (D) 20 x (H) 235mm
Shaft length: 8 inches (approx. 203mm)
รายละเอียดคำถาม
ที่จับตัว T พร้อมสปินเนอร์ที่มีแบริ่งแรงเสียดทานต่ำเพื่อการยึดและถอดสกรูหัวแฉกได้เร็วขึ้น ..
ประเภทของหัวไดรฟ์ (แทรก) เป็นไดรฟ์ hex ขนาด 1/4 นิ้ว
มีแม่เหล็กภายในหัวไดรฟ์เพื่อยึดบิตให้แน่น ..
ปลายบางช่วยให้หมุนได้ในพื้นที่แคบ ..
มือจับและเพลาทำจากเหล็กโครมวานาเดียมเคลือบโครเมี่ยม
สปินเนอร์มีผิวเคลือบอโนไดซ์สีน้ำเงินและสลักด้วยเลเซอร์พร้อมโลโก้ Motion Pro ..
ที่จับมีเบาะเพื่อป้องกันการเลื่อนหลุดและลดเมื่อยมือ .. ・This T-Handle has a low friction bearing in the spinner, which makes it easier to attach and remove Phillips head screws.
・The drive head type is 1/4" hex drive.
・There is a magnet inside the drive head to hold the bit firmly in place.
・Because the tip is thin, you can get into a narrow space and turn it.
・Handle and shaft are chrome vanadium steel with chrome finish.
・The spinner has a blue anodized finish and is laser engraved with the Motion Pro logo.
・The handle has a padded coating to prevent slippage and reduce hand strain.
ประเภทของหัวไดรฟ์ (แทรก) เป็นไดรฟ์ hex ขนาด 1/4 นิ้ว
มีแม่เหล็กภายในหัวไดรฟ์เพื่อยึดบิตให้แน่น ..
ปลายบางช่วยให้หมุนได้ในพื้นที่แคบ ..
มือจับและเพลาทำจากเหล็กโครมวานาเดียมเคลือบโครเมี่ยม
สปินเนอร์มีผิวเคลือบอโนไดซ์สีน้ำเงินและสลักด้วยเลเซอร์พร้อมโลโก้ Motion Pro ..
ที่จับมีเบาะเพื่อป้องกันการเลื่อนหลุดและลดเมื่อยมือ .. ・This T-Handle has a low friction bearing in the spinner, which makes it easier to attach and remove Phillips head screws.
・The drive head type is 1/4" hex drive.
・There is a magnet inside the drive head to hold the bit firmly in place.
・Because the tip is thin, you can get into a narrow space and turn it.
・Handle and shaft are chrome vanadium steel with chrome finish.
・The spinner has a blue anodized finish and is laser engraved with the Motion Pro logo.
・The handle has a padded coating to prevent slippage and reduce hand strain.
คำเตือน
* Bit ไม่รวมอยู่ในผลิตภัณฑ์นี้. โปรดเตรียมบิตสำหรับไดรฟ์ 1/4 hex แยกกันและใช้ในเวลาเดียวกัน *Bits are not included in this product.Please prepare the bit for 1/4 hex drive separately, and use it in combination.ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/