หน้าแรก

【DAYTONA】บังลมด้านข้าง

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿3,868
ราคาเต็ม: ฿4,114 6% |
คะแนนวีไบค์: 39

    • รหัสสินค้า:
    • 95915

ระบบกำลังคำนวณวันที่พร้อมจัดส่ง.....


สินค้าที่เกี่ยวข้อง

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

สี: สโม้ค
วัสดุ: อะครีลิค
จำนวน: 1 คู่ (สำหรับซ้ายและขวา)
เมดอินเจแปน

[คำเตือน]


[รายละเอียดสินค้า]

เป็นชุดบังแดดด้านข้างซ้ายและขวาทรงแอโร่สปอร์ต
ใช้อะคริลิคทนแรงกระแทก (หนา 2 มม.).
เป็นไอเท็มที่ช่วยป้องกันลมที่กระทบเท้าขณะขี่และลดความหนาวและความเมื่อยล้า

ตรงรุ่น

รีวิวสินค้า

    Early and 5 years since car body was released. In other models, similar products are out but not on LEAD, and as Mychen was also done, I thought that I would not go out any more.
    Drilling is necessary for installation, but it took less than 10 minutes. The precision of molding is truly like DAYTONA. As the appearance also the width gets bigger and the Front view also gains power.
    The material feels a bit unreliable because it is 2 mm thick Acrylic, but it seems like it will not fly with wind pressure if it is fixed properly. Although the windproofness has definitely increased, it seems that it will be the next Season that you can feel the experience since it was released from the coldest period..

    I am using NMAX for commuting in the early morning, but as the wind hitting my feet gradually began to face the winter season, webike says Side visor as a thing. When looking at the shape of each company including YamahaOP, DAYTONA made a relatively large shape seems to be good, so I thought whether the wind protection effect would be correspondingly large Large, buy. It is bigger than I expected to take the physical thing that I received, changing to a style like if the car rating got bigger around Large. Since the width does not spread laterally than Mirror, there was no problem in running. Installation will be Double - sided Tape and Screw clasp, but if you are screwing in Screw you will have to drill a hole in Cowl so if there is resistance to drilling it will only be attached with Double - sided Tape, If you stick firmly to the surface to be bonded, it is possible to secure firmly with the adhesive strength of Double-sided Tape. The accuracy of the shape was solid and there was no particular problem with mounting along the Cowl shape. Although it tried after installation but there was no Chatter sound, the running wind which was hit directly to the knee and the hem has been reduced Large. On the contrary, winds are slightly entangled towards the back of the knee, but the degree of patience is quite different as it is by far the smallest possible amount of entrainment compared to the amount of air that hits from the front until now. I used it for a while for commuting but it was correct and installed. I would like to think at that time as to whether I will remove it again as it gets warmer. I hope the price is cheaper a little more.

    I installed it in PCX 2016.
    Summer was good but I headed for the winter season and my feet are a bit cold so I found this item when I checked the countermeasure
    Easy to impress (Impressions) I will write
    1. First of all, Quantity : Pair (for Left and Right) I also looked at the side OEM I want to see Exactly fit without any gaps.

    2. Installation was unexpectedly easy, but the bottom treatment wiped the surface gently with a mild detergent and dried before installing

    3. Protecting the surface Although it was stripping off and peeling off Seal, you need to be careful not to scratch it when peeling it off

    4. I peeled a little strong Seal of adhesive and pushed it little by little to paste it on the examination, but I carefully stretched it so as not to be Gap

    5. After installing One Side, it will float unless you hold it down enough - - - It is warning because it floats considerably
    I pressed it firmly from top to bottom several times.

    6. After finishing installing Both Sides, I checked the float by the final check and pull a little to see if it could peel off

    Although installing a little care is necessary, it was able to install safely.

    Although it is imp of running, it is impression of running lightly in the neighborhood, but although the hem of Pants was swinging with the wind until now it seems that there is a considerable fitting effect.

    Since I am not running at high speed yet, there is no impression on that point, but I think whether it can be expected if it is this minute

    This time it was written for Screw stopper for safety, but this time it was installation with adhesive tape, but if there is something to be off, I think whether you have to consider Screw stopping.

    I installed it in PCX 2016.
    Summer was good but I headed for the winter season and my feet are a bit cold so I found this item when I checked the countermeasure
    Easy to impress (Impressions) I will write
    1. First of all, Quantity : Pair (for Left and Right) I also looked at the side OEM I want to see Exactly fit without any gaps.

    2. Installation was unexpectedly easy, but the bottom treatment wiped the surface gently with a mild detergent and dried before installing

    3. Protecting the surface Although it was stripping off and peeling off Seal, you need to be careful not to scratch it when peeling it off

    4. I peeled a little strong Seal of adhesive and pushed it little by little to paste it on the examination, but I carefully stretched it so as not to be Gap

    5. After installing One Side, it will float unless you hold it down enough - - - It is warning because it floats considerably
    I pressed it firmly from top to bottom several times.

    6. After finishing installing Both Sides, I checked the float by the final check and pull a little to see if it could peel off

    Although installing a little care is necessary, it was able to install safely.

    Although it is imp of running, it is impression of running lightly in the neighborhood, but although the hem of Pants was swinging with the wind until now it seems that there is a considerable fitting effect.

    Since I am not running at high speed yet, there is no impression on that point, but I think whether it can be expected if it is this minute

    This time it was written for Screw stopper for safety, but this time it was installation with adhesive tape, but if there is something to be off, I think whether you have to consider Screw stopping.

    There was a PCX in First Model Type until now
    I finally installed it because it was not in the Second Type Model

    Fit feeling is preeminent and it will not last until Limit
    Is it a good sea plum to say

    Just as Double-sided Tape hits the part of the solid surface of Curve
    It can be added immediately
    Tapping screw is included but I did not install it
    The Instruction Manual is also attached, and the installation method is also written

    The wind at your feet will also weaken, and flow into the snake at the time of rain will also
    Prevent. It seems to be active in winter

    There was a PCX in First Model Type until now
    I finally installed it because it was not in the Second Type Model

    Fit feeling is preeminent and it will not last until Limit
    Is it a good sea plum to say

    Just as Double-sided Tape hits the part of the solid surface of Curve
    It can be added immediately
    Tapping screw is included but I did not install it
    The Instruction Manual is also attached, and the installation method is also written

    The wind at your feet will also weaken, and flow into the snake at the time of rain will also
    Prevent. It seems to be active in winter

สินค้าที่มีผู้เข้าชมมากที่สุด