หน้าแรก

【YAMAHA】ขายึดป้ายทะเบียน

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿8,011
คะแนนวีไบค์: 80

ตรงรุ่น:

MT-10

MT-10 B676

MT-10 BW83

ดูเพิ่มเติม

สินค้าที่เกี่ยวข้อง

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

[หมายเลขอะไหล่จากทางผู้ผลิต] Q5K-ATV-Y82-270 วัสดุ: อลูมิเนียม

[รายละเอียดสินค้า]

เป็นที่ยึดป้ายทะเบียนอะลูมิเนียมน้ำหนักเบาคุณภาพสูง

มันกำกับเครื่องอย่างมีสไตล์และเป็นข้อมูลจำเพาะพิเศษ. ที่ให้เครื่องหมาย MT-10 หรือ MT ในร่างกาย

ตรงรุ่น

    • MT-10
    • MT-10 B676
    • MT-10 BW83

รีวิวสินค้า

    I installed it myself. The model is TMAX 530 DX for 17 years.
    We started assembling in advance by looking at Manual.

    - OEMFender's Screw is Screwwith Lock. Cross Screw is easy to lick. (1 pc licked)
    - Removing Blinker, Rubber is hard to come off hard and it is Large strange.
    As you scratch it scratches, it got much easier if you sprayed Silicon spray.
    - It is quite easy to put Blinker in the new way
    I removed Blinker Bracket from FenderBody and installed it, but when I attach it to Body
    Hexagonal Wrench Screw can not be tightened without screwing in → w → Ball head somehow tightened.
    - Bullet Terminal of License Plate Light is loose fitting as it is Included Parts : Although exchange is good,
    I need the Crimp Tool (The LEDs have disappeared after trial running as it is)
    I crash a little Female's outer diameter first aid measures. I plan to start over when I buy a tool.
    - Attaching Number base will hit LED Lamp, so it was necessary to process it in a U shape.

    And amateurs were Large strange work, but the appearance is perfectly satisfying

    Y's Gear's Fender Eliminator Kit. SIDE written MT-10 and Parenthesis nice.
    Bandetc shape. Easy to hang, convenient to use.

    Installation is somewhat troublesome, but Level is somehow managed with the attached Instruction Manual.
    Porting Blinker and porting KeyholeCover was the hardest fight.

    Blinker was Rubber packing? Formula, it was hard after coming off the fixed plate.
    To avoid hurting the Rubber, it was easy to do it while bending little by little with a slotted screwdriver etc..
    KeyholeCover is irritated because it is a detailed work when charging Spring (Lol)

    Processing may be necessary when using with Number plate cover.
    I had no choice but to process it.

    Installation was done at DIY. The manual is slightly unkind to the amateur. There is only OEM Parts and accuracy is good, car name Logo is included etc. etc. Quality is satisfactory. Angle adjustment of Plate mounting base is fixed so it can not be done. When I installed the License Plate directly, since the ground of Reverse side was exposed and it seemed poor, KIJIMALicense Plate Base (Black) We purchased separately purchased and installed it. Just this increased the texture considerably.

    Installation was done at DIY. The manual is slightly unkind to the amateur. There is only OEM Parts and accuracy is good, car name Logo is included etc. etc. Quality is satisfactory. Angle adjustment of Plate mounting base is fixed so it can not be done. When I installed the License Plate directly, since the ground of Reverse side was exposed and it seemed poor, KIJIMALicense Plate Base (Black) We purchased separately purchased and installed it. Just this increased the texture considerably.

สินค้าที่มีผู้เข้าชมมากที่สุด