- หน้าแรก
- เครื่องมือ
- เครื่องมือขัดเงา
- SK11
- SK11: หัวเจียรสเตนเลส
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[วัสดุ]WA
เหล็ก
[คุณสมบัติของผลิตภัณฑ์]
เส้นผ่านศูนย์กลางกว้าง : เพลาหกเหลี่ยม 6.35 มม
ขนาด / รูปร่าง : 13mmx25mm / ทรงกระบอก
ขนาดเกรน : WA60NV
รุ่นที่สอดคล้องกัน : สว่านไฟฟ้า / สว่านกระแทก [Material]
・WA material
・Iron
[Product Specifications]
Shaft Diameter: 6.35mm hexagonal shaft
Size & Shape: 13mm x 25mm, Cylindrical type
Particle size: WA60NV
Supported Models: Electric drills and impact drivers
[Standard] NO.50-HEX
รายละเอียดคำถาม
ผลิตภัณฑ์คุณภาพสูงพร้อมเพลาหกเหลี่ยมการผสมผสานของเม็ดขัดที่ช่วยให้บดได้แม้ในการหมุนรอบต่ำของตัวขับกระแทกและเพลาหกเหลี่ยมแบบสัมผัสเดียวที่โยกเยกน้อยกว่า ..
[ใบสมัคร]
งานเจียรสแตนเลส
[คุณสมบัติของสินค้า]
6. เพลา 35 มม. เข้ากันได้กับตัวขับกระแทก ..
การรวมกันของเม็ดขัดที่ช่วยให้การบดที่ RPM ต่ำ
เหมาะสำหรับขัดโลหะทั่วไปและสแตนเลสเหนียว ..
วัสดุ WA ดัดแปลงสำหรับสแตนเลส ..
เม็ดขัดผสมสำหรับเจียรสแตนเลส .. Adopting a hexagonal shaft, it is a high quality product with an abrasive grain blend that can be ground even at the low RPM of an impact driver and a one-touch hexagonal shaft with little shake.
[Use]
Grinding of stainless steel.
[Product Features]
The 6.35mm shaft is compatible with impact drivers.
The abrasive grains are blended to enable grinding at low RPM.
It is suitable for polishing general metals and sticky stainless steel.
This is a WA material modified for stainless steel.
Abrasive grains are blended for grinding stainless steel.
คำเตือน
* โปรดใช้ภายในความเร็วในการหมุนที่อนุญาตโปรดตรวจสอบว่ามีความผิดปกติในการเดินเบาในที่ปลอดภัยหรือไม่ก่อนเริ่มทำงานโปรดตรวจสอบว่าหินเจียรแตกหรือไม่ก่อนที่จะจับ* โปรดใส่ใจกับการโอเวอร์โหลดเมื่อใช้กับไดรเวอร์กระแทก. หินลับมีดอาจแตกได้
* โปรดใช้ระยะยื่นที่ 15 มม. หรือน้อยกว่า. หากใส่นานเกินไปโปรดระวังเพราะอาจทำให้เกิดอุบัติเหตุที่ไม่คาดคิดอันเป็นเหตุให้วิ่งไม่ได้ *Please use within the allowable speed.Before starting work, check that there is no abstockity by rotating the machine in a safe place.Check the grinding wheel for cracks before chucking.
*When using an impact driver, be careful not to apply too much load.The grinding wheel may break.
*The overhang should be less than 15mm.Please be careful not to extend the length too long, because it may cause the center runout and cause an unexpected accident.
ทบทวน
0.0
/ 5
(0 ทบทวน)