- หน้าแรก
- เครื่องมือ
- เครื่องมือไฟฟ้า
- SK11
- SK11: ดอกเจาะหัวเพชรสำหรับเจาะเหล็กกล้า
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[วัสดุ]เหล็กพิเศษ
[เนื้อหาผลิตภัณฑ์)] แกนสว่าน, แหวนนำ, แหวนซ่อมเทปสองหน้า, ฟองน้ำสำหรับแบบเปียก
[คุณสมบัติของผลิตภัณฑ์]
ขนาด : 5.0 มม
รุ่นที่ใช้ : ไดร์เวอร์กระแทก
ความเร็วในการหมุนที่เหมาะสม : 1,000-3,000 นาที -1
สำหรับ Rotating Tool [Material]
・Special steel
[Components] Core drill, Guide ring, Double-sided tape for fixing ring, Sponge for wet use
[Product Specifications]
Size: 5.0mm
Model used: Impact Driver
Optimum rotation speed: 1000-3000min-1
For rotary tools only
[Standard] 5mm
รายละเอียดคำถาม
เจาะรูได้ง่ายในวัสดุที่บดยากเช่นกระเบื้องแข็งพร้อมตัวขับกระแทก ..
[ใบสมัคร]
เจาะกระเบื้องเนื้อแข็งกระเบื้องพอร์ซเลนหินบล็อคปูนอิฐเซรามิกส์ ฯลฯ ..
[คุณสมบัติของสินค้า]
เสร็จสิ้นสะอาดมากและนานกว่าสว่านคาร์ไบด์ซีเมนต์ 10 เท่าโดยไม่บิ่น ..
เนื่องจากเป็นเพชรเชื่อมจึงทนทานกว่าการชุบด้วยไฟฟ้า ..
มีวงแหวนนำทางเพื่อให้เจาะได้ง่ายแม้สำหรับผู้ใช้ครั้งแรก ..
การเจาะทำได้โดยการหมุนเท่านั้นดังนั้นจึงสามารถเจาะได้โดยมีเสียงรบกวนและการสั่นสะเทือนต่ำ ..
เพลาหกเหลี่ยมช่วยให้คุณติดตั้งกับตัวขับกระแทก .. You can easily drill hard-to-machine materials such as hard tiles with an impact driver.
[Use]
Drilling holes in hard tile, porcelain tile, stone, block, mortar, brick, ceramic, etc.
[Product Features]
The finish is very clean with no chips and lasts more than 10 times longer than cemented carbide drills.
Since it is welded diamond, it is more durable than electrodeposition.
A guide ring is provided for easy drilling even for first-time users.
Since drilling is done by rotation only, drilling can be done with low vibration and low noise.
The hexagonal shaft can be attached to an impact driver.
คำเตือน
* โปรดใช้สำหรับโหมดการหมุนเท่านั้น (อย่าใช้การตี) เนื่องจากเป็นเอกสิทธิ์สำหรับเครื่องมือโรตารี่เมื่อใช้กับเครื่องมือที่โดดเด่น* โปรดทำให้รูแกนหลักของเพชรมีความยาวรู 15 มม. หรือน้อยกว่า
* หากมีปัญหาการขาดแคลนน้ำหล่อเย็นที่ปลายสว่านแกนเพชรในระหว่างการเจาะรูลึกโปรดใส่และถอดส่วนปลายของดอกสว่านแกนเพชรออกจากกระเบื้องทุกๆสองสามวินาที (เด็ดปลาย) ก่อนใช้ *This product is designed for use with rotary tools only. If you want to use this product with a blowing tool, please use it in rotary mode only (no blowing).
*The length of the core-extracting hole of the diamond core drill should be less than 15mm.
*When the cooling water is insufficient for the tip of the diamond core drill during deep hole drilling, insert and remove the tip of the diamond core drill from the tile (cooling the tip) once every few seconds.*There may be changes in product specifications due to the manufacturer's reasons.
ทบทวน
0.0
/ 5
(0 ทบทวน)