- หน้าแรก
- เครื่องมือ
- เครื่องมือขัดเงา
- SK11
- SK11: แผ่นลับคม
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[คุณสมบัติของผลิตภัณฑ์]ขนาด : (เส้นผ่านศูนย์กลางภายนอก) 50 มม. / (เส้นผ่าศูนย์กลางภายใน ) 6 มม. / (ความหนา ) 1mm
เพลาหกเหลี่ยม 6.35 มม
ขนาดเกรน : (พื้นผิวอาไร) 400 / (การตกแต่งพื้นผิว) 1000
รุ่นที่สอดคล้องกัน : สว่านไฟฟ้า / สว่านกระแทก [Product Specifications]
Size: (Outer diameter) 50mm, (inner diameter) 6mm, (thickness) 1mm
6.35mm hexagonal shaft
Particle size: (Rough grinding surface) 400, (Finishing surface) 1000
Supported Models: Electric drills and impact drivers
[Standard] 50mm both sides
รายละเอียดคำถาม
คุณสามารถใช้ตัวขับแรงกระแทกเพื่อขัดผลิตภัณฑ์ทังสเตนคาร์ไบด์ผลิตภัณฑ์แก้วเซรามิกใบมีด ฯลฯ
[ใบสมัคร]
การขัดผลิตภัณฑ์คาร์ไบด์ผลิตภัณฑ์แก้วเซรามิกใบมีด ฯลฯ ..
[คุณสมบัติของสินค้า]
เคลือบพิเศษป้องกันการอุดตันระหว่างขัดช่วยเพิ่มประสิทธิภาพในการทำงาน ..
ทั้งสองด้านเคลือบด้วยเพชร Electrodeposited และใช้งานได้นานขึ้นสองเท่า ..
ขนาดเกรนเปลี่ยนจาก 400 ด้านหนึ่งเป็น 1,000 อีกด้านหนึ่งดังนั้นจึงสามารถใช้สำหรับขัดเงาผลิตภัณฑ์คาร์ไบด์และใบมีดได้ ..
ด้วยบูชที่แนบมาสามารถใช้กับเครื่องลับคมใบมีดได้ (ความเร็วต่ำ) .. You can polish carbide products, glass products, ceramics, knives, etc. with an impact driver.
[Use]
Polishing of cemented carbide products, glass products, ceramics, knives, etc.
[Product Features]
Special coating prevents clogging during polishing and improves work efficiency.
Both sides are coated with electrodeposited diamonds, making this product twice as useful as the original.
The grit size is changed from 400 on one side to 1000 on the other side, so it can be used for finishing and polishing of carbide products and blades.
With the attached bush, it can also be used for a blade grinding grinder (low speed).
คำเตือน
* โปรดสวมถุงมือนิรภัยขณะทำงาน* โปรดใช้หลังจากตรวจสอบว่าสกรูยึดส่วนเพลาและส่วนของเครื่องเหลาถูกขันให้แน่นก่อนใช้งาน
* โปรดใช้ความเร็วในการหมุนของสว่านให้ต่ำที่สุด. จะอันตรายมากหากใช้ในการหมุนด้วยความเร็วสูง *Always wear safety glasses while working.
*Before use, please make sure that the screw that fixes the sharpener to the shaft is tightened firmly.
*Use the drill at the lowest possible rotational speed.It is very dangerous to use this product at high speed.*There may be changes in product specifications due to the manufacturer's reasons.
ทบทวน
0.0
/ 5
(0 ทบทวน)