- หน้าแรก
- เครื่องมือ
- เครื่องมือไฟฟ้า
- SK11
- SK11: ชุดดอกสว่านความเร็วสูง
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[วัสดุ]สว่าน: เหล็กความเร็วสูง
[คุณสมบัติของผลิตภัณฑ์]
ขนาด: 3.0 ・ 4.0 ・ 5.0 มม
เพลาหกเหลี่ยม 6.35 มม
รุ่นที่สอดคล้องกัน: สว่านไฟฟ้า / ไดร์เวอร์กระแทกการชาร์จ
ขนาดสกรูไม้ที่สอดคล้องกัน: (3.0) : 3.3-3.8 ・ (4.0) : 4.5-5.1 ・ (5.0) : 5.2-5.8 มม
1 ชุด 3 ชิ้น
มาตรฐาน] 3.0 / 4.0 / 5.0MM [Material]
・Drill: High Speed Steel
[Product Specifications]
Size: 3.0, 4.0, 5.0mm
6.35mm hexagonal shaft
Supported Models: Electric drills and rechargeable impact drivers
Compatible wood screw size: (3.0): 3.3-3.8・(4.0): 4.5-5.1・(5.0): 5.2-5.8mm
set of three
[Standard] 3.0 / 4.0 / 5.0mm
รายละเอียดคำถาม
เหมาะสำหรับงานเจาะใต้ไม้ไม้ไผ่และพลาสติกทั่วไป ..
[ใบสมัคร]
เจาะรูไม้.
[คุณสมบัติของสินค้า]
ดอกสว่านทำจาก HSS และมีความทนทานเป็นเยี่ยม ..
ก่อนเจาะวัสดุแข็งเช่นอลูมิเนียมและไม้ลามิเนตก็ทำได้ ..
ปลายใบเรียวเล็กปรับขนาดการเจาะได้ ..
6. การติดตั้งแบบสัมผัสเดียวและการถอดเพลาหกเหลี่ยม 35 มม. ไปยังผลกระทบ It is perfect for pre-drilling holes in wood, bamboo and plastics in general.
[Use]
Drilling holes in wood.
[Product Features]
The drill material is made of HSS and has excellent durability.
You can also drill down to hard materials such as aluminum and laminated wood.
The cutting edge is tapered and the drilling size can be adjusted.
The 6.35mm hexagonal shaft allows for one-touch attachment and removal to the impactor.
คำเตือน
* สำหรับไม้เนื้อแข็งกรุณาขันสกรูให้แน่นหลังจากเปิดรูด้านล่างของเส้นผ่านศูนย์กลางสกรูไม้ที่เหมาะสม 80% ที่จะใช้* สำหรับไม้เนื้ออ่อนให้เจาะรูประมาณ 30% ของเส้นผ่านศูนย์กลางด้ายไม้ที่จะใช้แล้วขันสกรูให้แน่น. การเจาะเกินส่วนขดลวดอาจทำให้ดอกสว่านหลุดหรือเสียหายได้
* โปรดใช้สว่านเฉพาะสำหรับเหล็กสแตนเลสคอนกรีตและอื่น ๆ *For hard wood, drill a pre-drilled hole about 80% of the diameter of the wood screw to be used before tightening the screw.
*For soft wood, drill a pre-drilled hole about 30 percent of the diameter of the wood screw to be used before tightening the screw.If the hole is drilled more than the lathen part, it may cause the drill to be stuck or broken.
*Use a special drill for iron, stainless steel, concrete, etc.*There may be changes in product specifications due to the manufacturer's reasons.
ทบทวน
0.0
/ 5
(0 ทบทวน)