- หน้าแรก
- เครื่องมือ
- เครื่องมือไฟฟ้า
- SK11
- SK11: ชุดดอกสว่านแบบสั้น
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[วัสดุ]เจาะ : เหล็กความเร็วสูง
[คุณสมบัติของผลิตภัณฑ์]
ขนาด : 3.0 / 4.0 / 5.0 มม
เพลาหกเหลี่ยม 6.35 มม
รุ่นที่สอดคล้องกัน : สว่านไฟฟ้า / ไดร์เวอร์ชาร์จไฟฟ้า
ขนาดสกรูไม้ที่สอดคล้องกัน : (3.0) : 3.3-3.8 / (4.0) : 4.5-5.1 / (5.0) : 5.2-5.8 มม
ความยาวโดยรวม : 60mm
ปริมาณ : 1 ชุด 3 ชิ้น [Material]
・Drill: High Speed Steel
[Product Specifications]
Size: 3.0, 4.0, 5.0mm
6.35mm hexagonal shaft
Supported Models: Electric drills and rechargeable impact drivers
Compatible wood screw size: (3.0): 3.3-3.8・(4.0): 4.5-5.1・(5.0): 5.2-5.8mm
Full Length: 60mm
set of three
[Standard] 3.0 / 4.0 / 5.0mm
รายละเอียดคำถาม
เหมาะสำหรับเจาะรูในพื้นที่แคบหรือเป็นแผ่นบาง ๆ ..
[ใบสมัคร]
เจาะรูเพื่อป้องกันไม้แตกก่อนยึดสกรู
[คุณสมบัติของสินค้า]
ออกแบบให้มีความยาว 60 มม. เพื่อเตรียมเจาะในพื้นที่แคบ .. It is perfect for drilling down into tight spaces and thin sheets.
[Use]
Drilling holes to prevent wood splitting before screwing.
[Product Features]
The overall length of 60mm makes it possible to work in a narrow space.
คำเตือน
* สำหรับไม้เนื้อแข็งกรุณาขันสกรูให้แน่นหลังจากเปิดรูด้านล่างของเส้นผ่านศูนย์กลางสกรูไม้ที่เหมาะสม 80% ที่จะใช้* สำหรับไม้เนื้ออ่อนให้เจาะรูประมาณ 30% ของเส้นผ่านศูนย์กลางด้ายไม้ที่จะใช้แล้วขันสกรูให้แน่น. การเจาะเกินส่วนขดลวดอาจทำให้ดอกสว่านหลุดหรือเสียหายได้
* โปรดใช้สว่านเฉพาะสำหรับเหล็กสแตนเลสคอนกรีตและอื่น ๆ *For hard wood, drill a pre-drilled hole about 80% of the diameter of the wood screw to be used before tightening the screw.
*For soft wood, drill a pre-drilled hole about 30 percent of the diameter of the wood screw to be used before tightening the screw.If the hole is drilled more than the lathen part, it may cause the drill to be stuck or broken.
*Use a special drill for iron, stainless steel, concrete, etc.*There may be changes in product specifications due to the manufacturer's reasons.
ทบทวน
0.0
/ 5
(0 ทบทวน)