- หน้าแรก
- เครื่องมือ
- ไขควง
- เครื่องมือช่าง
- ไขควง
- SK11
- SK11: ปืนลมสำหรับใช้ร่วมกับลูกบล็อค 12.7
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[เนื้อหาของผลิตภัณฑ์] ตัวถัง / ซ็อกเก็ตกระแทก (17/19/21 มม.) / ปลั๊กแอร์วันทัช (R1 / 4Male สกรู) / น้ำมันเครื่องมือลม / เทปซีล / กล่อง
[คุณสมบัติของผลิตภัณฑ์]
ฟังก์ชั่นค้อน : ค้อนเดี่ยว
มุมเสียบซ็อกเก็ต : ทั่ง 12.7 มม. ตร.ม.. (1 / 2sq)
ความเร็วในการหมุนที่ไม่ได้โหลด : 7100 นาที -1
ปริมาณอากาศที่ใช้ : 780L / นาที (0.78 ลบ.ม. / นาที)
พอร์ตรับอากาศ : Rc1 / 4 (PT1 / 4 สกรูตัวเมีย)
ใช้ความดัน : 0.6MPa
ความจุแรงบิดสูงสุด : 260-350N / m / ใช้งานจริงช่วงแรงบิด 150-250N / m
[Components] Main unit, Impact socket (17, 19, 21mm), One-touch plug for air (R1/4 male screw), Air tool oil, Seal tape, Case
[Product Specifications]
Hammer mechanism: single hammer
Socket Insertion Angle: Anvil 12.7mm square (1/2sq)
No-load rotation speed: 7100min-1
Air usage: 780L/min(0.78m3/min)
Air Intake: RC1/4 (PT1/4 female screw)
Working pressure: 0.6MPa
Max. torque capacity: 260-350N-m, Practical torque range 150-250N-m
[Standard] SIW-1300S
รายละเอียดคำถาม
ง่ายต่อการเปลี่ยนการขันและการคลายด้วยคันโยกถอยหลัง / ถอยหลัง ..
[ใบสมัคร]
การขันและคลายสลักเกลียวและถั่ว
[คุณสมบัติของสินค้า]
แรงบิดสูงสุด 350N-m ทำให้ทำงานได้ไว ..
ช่องระบายอากาศด้านล่างเพื่อให้ไอเสียไม่รบกวนการทำงาน ..
ตัวควบคุมการไหล 4 ขั้นตอนเป็นแบบหมุนและเปลี่ยนได้คล่อง .. The rear forward / reverse lever makes it easy to change the tightening / loosening position.
[Use]
Tightening and loosening of bolts and nuts.
[Product Features]
The maximum torque of 350 N・m allows for speedy work.
The downward air exhaust vent does not interfere with the work.
The 4-stage flow regulator can be changed smoothly by the rotating type.
คำเตือน
* กรุณาอย่าใช้ท่ออากาศที่อาจเกิดรอยขีดข่วนหรือความเสียหาย* โปรดสวมแว่นตาป้องกันหน้ากากกันฝุ่นปลั๊กอุดหู ฯลฯ. ขณะทำงาน
* กรุณาอย่าเสียงานเติมน้ำมันก่อนระหว่างและหลังการใช้งานเพื่อบำรุงรักษาเครื่องมือลมอย่างเหมาะสม *Do not use an air hose that is damaged or may be damaged.
*Wear protective goggles, dust mask, ear plugs, etc. while working.
*In order to maintain the air tool in good working order, do not fail to refuel before, during and after use.*There may be changes in product specifications due to the manufacturer's reasons.
ทบทวน
0.0
/ 5
(0 ทบทวน)