- หน้าแรก
- เครื่องมือ
- เครื่องมือไฟฟ้า
- SK11
- SK11: ชุดดอกสว่าน
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[วัสดุ]เหล็กความเร็วสูง
[เนื้อหาของผลิตภัณฑ์] 2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 4.5 / 5.0 / 6.0 มม
[คุณสมบัติของผลิตภัณฑ์]
เส้นผ่านศูนย์กลาง : 2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 4.5 / 5.0 / 6.0 มม
เพลากลม
รุ่นที่สอดคล้องกัน : สว่านไฟฟ้า / ไดร์เวอร์สว่าน / ลูก
ความหนาของแผ่นที่สอดคล้องกัน : เหล็ก (เส้นผ่านศูนย์กลางดอกสว่าน x3 เท่า) , สแตนเลส (เส้นผ่านศูนย์กลางสว่าน x1 / 2 เท่า)
ปริมาณ : 1 ชุด 8 ชิ้น. [Material]
・High speed steel
[Components] 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0mm
[Product Specifications]
Diameter: 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0mm
round shaft
Supported Models: Electric drills, rechargeable drill drivers, drilling machines
Compatible plate thickness: Iron (Drill diameter x 3 times), Stainless steel (Drill diameter x 1/2 times)
8-piece set
[Standard] S3SD-8S
รายละเอียดคำถาม
ความเร็วในการเจาะเร็วขึ้น 3 เท่า (เทียบกับความเร็วของ บริษัท ) เหมาะสำหรับเจาะเหล็กสแตนเลส ฯลฯ
[ใบสมัคร]
เจาะเหล็กสแตนเลสอลูมิเนียมไม้และเรซิน
[คุณสมบัติของสินค้า]
ความต้านทานการตัดลดลงเนื่องจากรูปทรงปลายใบมีดที่เป็นเอกลักษณ์ (3.8 มม. และขนาดเล็กกว่าเป็นเคล็ดลับปกติ) ..
ความเร็วในการเจาะเร็วขึ้นสามเท่า (เทียบกับผู้ผลิต) เพราะมันถูกตัดที่กึ่งกลางและสองจุดที่ขอบด้านนอก ..
สามารถเจาะเสี้ยนได้และใกล้กับวงกลมพอดี ..
ไม่ไวต่อผลกระทบด้านความร้อนที่เกิดจากแรงเสียดทาน
โหลดสว่านน้อยลงและใช้แบตเตอรี่น้อยลง .. Three-times faster drilling speed (compared to our company), best for drilling iron and stainless steel.
[Use]
Drilling holes in iron, stainless steel, aluminum, wood, and resin.
[Product Features]
Cutting resistance has been reduced by the original cutting edge shape (sizes under 3.8mm are normal cutting edge).
Drilling speed is three times faster (compared with the manufacturer) because cutting is performed at two locations, the center and the periphery.
It is difficult to produce burrs and can drill a hole close to a perfect circle.
It is not susceptible to thermal effects caused by friction.
The load on the drill is small, which reduces the drain on the battery.
คำเตือน
* โปรดสวมแว่นตานิรภัย. กรุณาทำงานกับเสื้อผ้าที่ไม่สร้างผิวหนัง* เป็นไปไม่ได้ที่จะเจาะรูวัสดุที่ได้รับความร้อน (เช่นเหล็กชุบแข็ง).
* โปรดใช้ตามจำนวนการหมุนที่เหมาะสมขึ้นอยู่กับวัสดุเมื่อเจาะรู *Wear safety glasses.Wear clothing that does not expose skin.
*Heat-treated materials (e.g. hardened steel) cannot be drilled.
*When drilling, please use the most suitable rotation speed according to the material.*There may be changes in product specifications due to the manufacturer's reasons.
ทบทวน
0.0
/ 5
(0 ทบทวน)