มิเตอร์วัดน้ำมันดิจิตอล DG-H08

Features

Advantages of installing the DG series "More accurate than a stock fuel gauge!●Advantages of installing in vehicles equipped with a fuel warning lamp: Vehicles equipped with a fuel warning lamp run without knowing the remaining fuel level.When the fuel level reaches the specified value, the fuel warning light suddenly comes on and you have to rush to find a gas station.By installing the DG Series, you will be able to accurately grasp the remaining fuel level displayed in digital numbers and refuel in plenty of time.●Advantages of installing in vehicles equipped with a fuel gaugeIn most vehicles, the fuel gauge display will not decrease until the vehicle has been ridden several kilometers to several dozen kilometers after refueling.This is because the float measurement method is generally used to measure the amount of fuel remaining.*Consumption of fuel in the space indicated by [a] in Figure 1 does not lower the float.*The fuel in the space indicated by [b] in Figure 1 is consumed, and the fuel gauge display decreases as the float drops.Because of the shape of the tank and the accuracy of the measurement, the fuel gauge display shows almost no change after driving a few kilometers to a few dozen kilometers after refueling, but as the distance traveled and fuel consumption increases, the fuel gauge display may drop faster or the fuel gauge display may not match the remaining fuel.However, because the DG-329 calculates fuel consumption from the fuel injection signal, it can display the exact fuel consumption status in real time, even when the tank is full, using digital numbers. ●You can measure the section fuel consumption!The fill-up method is commonly used to measure the fuel consumption of a vehicle.*The fill-up method is a method of calculating fuel economy by filling up with gasoline, resetting the trip meter, riding (consuming gasoline), filling up again, and then dividing the distance traveled by the amount of gasoline.The fuel consumption measured by this method is called average fuel consumption, and is treated as the average fuel consumption in various driving situations such as city streets, ordinary roads, mountain passes, and highways.The average fuel consumption for the following vehicles is 20km/L.In this case, A: City, B: Highway, C: It can't measure the exact fuel consumption of each road.This product can be used in conjunction with a trip meter to measure sectional fuel consumption.A: If the gasoline consumed is 2 liters when riding for 30km in the city, the sectional fuel consumption is 15km/L B: If the gasoline consumed during a 100 km drive on the expressway is 4L, the section fuel consumption is 25 km/L C: If the gasoline consumed during a 70-km ride on an ordinary road is 4 liters, the sectional fuel consumption is 17.5 km/L. As you can see, you can get the detailed sectional fuel consumption depending on the riding conditions.On the other hand, if you multiply the distance traveled while consuming 0.1L by 10, you can get the distance traveled per liter.●Helps improve fuel efficiency and eco-riding!When the injector cuts off fuel injection, such as when the engine is braked, the digital display on the unit will flash.Because you can see how much fuel is being cut, you can ride more eco-friendly by not opening the accelerator unnecessarily, such as when going downhill.In addition, since the change of the fuel level by the accelerator work can be understood, fuel-efficient riding can be achieved by paying attention to the accelerator work.●Wide range of use from street to circuit
This product can be used not only for motorcycles but also for a wide range of vehicles such as car, construction equipment, agricultural equipment, ships, and watercraft, as long as the vehicle is equipped with 12V Electronic Fuel Injection (EFI).In addition, when there is a limit to the amount of fuel used, such as in a race, the method of riding by 0.1L units can be changed when the remaining amount of fuel is between 99.9L and 10.0L, and by 0.01L units when the remaining amount is less than 10L, which is useful for adjusting the fuel by improving the time or reducing the time.If you are in an endurance race where the amount of fuel you can refuel at one time is limited, it is very useful to know when to refuel.Thus, you can run on the lowest fuel and lightest weight.