นี่คือโอริงซ่อมและซีลน้ำมันขนาดเดียวกับอะไหล่โรงงาน .. หากมีน้ำมันรั่วหรือซึมจากฝาเติมน้ำมันฝากรองน้ำมันแกนและเพลาจำเป็นต้องเปลี่ยนฝาเติมน้ำมันใหม่ ..
This is a repair O-ring and oil seal of the same size as the factory parts.. If there are oil leaks or seepage from the oil filler cap, oil filter cap, spindles and shaft, it is necessary to change the oil filler cap to a new one..
About quality and texture: I am happy with the quality of the oil level gauge O-Ring from K-Pit, made from a soft flexible rubber to help create a good seal.
About the feeling of use: The previous owner had significantly over tightened the oil level gauge and damaged the O-Ring, the K-Pit O-Ring fits perfectly with zero leaks.
Products to buy together: The timing and crankshaft hole cap O-Rings from K-Pit would also be desirable to purchase alongside oil level gauge O-Ring.
Difficulty of installation: The process to install just takes a few minutes, remove the oil level gauge, be sure to discard the old O-Ring and then fit your new O-Ring that has been lubricated lightly with engine oil. Do not over tighten the oil level gauge as if only needs to be finger tight. Not difficult to do.
Cost performance and comparison with other products: Good costing as you are getting a quality part from K-Pit that was in stock and ready to ship unlike the Honda O-Ring but the K-Pit O-Ring is slightly more expensive.
About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.
Any concerns, cautions, or advice when purchasing: View the Kitaco engine tuning and maintenance parts catalog to see what other maintenance parts K-Pit have to fit the Grom and the Monkey 125.ดูรายละเอียด
About quality and texture: I am happy with the quality of the crankshaft hole cap O-Ring, made from a soft flexible rubber to help create a good seal.
About the feeling of use: The previous owner had significantly over tightened the crankshaft cap and damaged the O-Ring, the K-Pit O-Ring fitted perfectly with zero leaks.
Products to buy together: The timing hole cap O-Ring from K-Pit would also be desirable to purchase along side this crankshaft hole cap O-Ring as they are ideal to replace together after you have finished checking your valve clearances.
Difficulty of installation: The process to install just takes a few minutes, remove the crankshaft hole cap, be sure to discard the old O-Ring as they can remain in the hole on the engine case and then fit your new O-Ring that has been lubricated lightly with engine oil. Do not over tighten the plug as the manual only calls out for 8 N.m. Not difficult to do.
Cost performance and comparison with other products: Good costing as you are getting a quality part from K-Pit that was in stock and ready to ship unlike the Honda O-Ring but the K-Pit O-Ring is slightly more expensive.
About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.
Any concerns, cautions, or advice when purchasing: View the Kitaco engine tuning and maintenance parts catalog to see what other maintenance parts K-Pit have to fit the Grom and the Monkey 125.ดูรายละเอียด
About quality and texture: I am happy with the quality of the timing hole cap O-Ring, made from a soft rubber to flex and seal to create a good seal.
About the feeling of use: The previous owner had significantly over tightened the timing cap and damaged the O-Ring, the K-Pit O-Ring fitted perfectly with zero leaks.
Products to buy together: The crank hole cap O-Ring from K-Pit would also be desirable to purchase along side this timing hole cap O-Ring as they are ideal to replace together after you have finished checking your valve clearances.
Difficulty of installation: The process to install just takes a few minutes, remove the timing hole cap, be sure to discard the old O-Ring as they can remain in the hole on the engine case and then fit your new O-Ring that has been lubricated lightly with engine oil. Do not over tighten the plug as the manual only calls out for 6 N.m. Not difficult to do.
Cost performance and comparison with other products: Good costing as you are getting a quality part from K-Pit that was in stock and ready to ship unlike the Honda O-Ring and the K-Pit O-Ring was cheaper.
About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.
Any concerns, cautions, or advice when purchasing: View the Kitaco engine tuning and maintenance parts catalog to see what other maintenance parts K-Pit have to fit the Grom and the Monkey 125.ดูรายละเอียด
Oil Level Gauge O-Ring for the Grom
24 Jan 2023NO NAME