- หน้าแรก
- อุปกรณ์
- เครื่องส่งสัญญาณ ETC
- อุปกรณ์ไฟฟ้า
- DEGNER
- DEGNER: กระเป๋าใส่กล่องสัญญาณ ETC Real leather
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
วัสดุ: หนัง สีแทน ธรรมชาติขนาด: h9.0cm x w11.5cm x d4.0cm
ของที่มีแถมให้ไปด้วย: ใช้ซิป x1 ชิ้น, ขายึด เข็มขัดรัด x2 ชิ้น. Material: Natural tanned cowhide
Size: H9.0cm x W11.5cm x D4.0cm
Components: Hook and loop fastener x 1, Attachment belt x 2
รายละเอียดคำถาม
แต่งตัว ETC ด้วยซองหนังแทนนินสีธรรมชาติ!
•เครื่องนี้ได้รับการแก้ไขอย่างแน่นหนา
ประเภทการแยกเสาอากาศรุ่นเฉพาะ ETC. เครื่องสามารถยึดได้อย่างมั่นคงและสามารถติดตั้งที่ด้านใดด้านหนึ่งของรถได้ขึ้นอยู่กับการเดินสายไฟ. มิตซูบา ฯลฯ (ก.พ.ค. - พ.ศ. 51) ยังได้รับการสนับสนุน
•ไม่จำเป็นต้องใช้ขายึด!
มีการติดตั้งที่ง่ายดายด้วยสลักเกลียวเข้าด้วยกันที่ตำแหน่งใด ๆ ของตัวรถ! (สามารถติดกับสายรัดที่แนบมาได้)
•ซีลเวลโครสำหรับตัวถัง
ติดซีล Velcro ที่ด้านหลังของตัวเครื่อง ETC คุณสามารถแนบตัว ETC หลวมเกินไป
•ติดแน่นด้วยแผ่นเรซิน
ฐานของสิ่งที่แนบมาทำจากเรซินบอร์ดและเพิ่มความแข็งแรง. นอกจากนี้ยังมีรูสำหรับสายรัดด้านซ้ายและขวาเพื่อให้คุณสวมใส่ได้อย่างปลอดภัย
•ติดตั้งง่าย
ขั้นตอนที่ 1. ขันสลักเกลียวที่ตำแหน่งใดก็ได้บนตัวถังรถ. (หากหัวของสลักเกลียวเล็กให้ปรับด้วยแหวนรองเป็นต้น)
ขั้นตอนที่ 2. หลังจากผ่านการเดินสายของเครื่องแล้วให้ติดซีลเวลโครที่ให้มาที่ด้านหลังของเครื่อง Dress up your ETC with a natural tanned leather case!
●Securely fasten the unit
Antenna separation type ETC model.The unit can be fixed firmly and can be mounted on either side of the vehicle depending on the wiring arrangement.MITSUBA ETC(MSC-BE51) is also available.
●No installation bracket required!
Easy to install by tightening the bolts together at any position on the car body!(It can also be attached with the bundling band provided)
●Velcro seal for main unit
Attach the attached Velcro seal to the back of the ETC unit, and the ETC unit can be attached firmly.
●Secure installation with plastic board
The mounting base is made of plastic board to increase strength.There are also holes on both sides for cable ties, so you can wear it with confidence.
●Easy installation
STEP 1. Tighten the bolts to the desired position on the vehicle body.(If the head of the bolt is small, adjust it with a washer, etc.)
STEP 2. After passing the wiring of the unit, attach the attached Velcro seal to the back of the unit.
•เครื่องนี้ได้รับการแก้ไขอย่างแน่นหนา
ประเภทการแยกเสาอากาศรุ่นเฉพาะ ETC. เครื่องสามารถยึดได้อย่างมั่นคงและสามารถติดตั้งที่ด้านใดด้านหนึ่งของรถได้ขึ้นอยู่กับการเดินสายไฟ. มิตซูบา ฯลฯ (ก.พ.ค. - พ.ศ. 51) ยังได้รับการสนับสนุน
•ไม่จำเป็นต้องใช้ขายึด!
มีการติดตั้งที่ง่ายดายด้วยสลักเกลียวเข้าด้วยกันที่ตำแหน่งใด ๆ ของตัวรถ! (สามารถติดกับสายรัดที่แนบมาได้)
•ซีลเวลโครสำหรับตัวถัง
ติดซีล Velcro ที่ด้านหลังของตัวเครื่อง ETC คุณสามารถแนบตัว ETC หลวมเกินไป
•ติดแน่นด้วยแผ่นเรซิน
ฐานของสิ่งที่แนบมาทำจากเรซินบอร์ดและเพิ่มความแข็งแรง. นอกจากนี้ยังมีรูสำหรับสายรัดด้านซ้ายและขวาเพื่อให้คุณสวมใส่ได้อย่างปลอดภัย
•ติดตั้งง่าย
ขั้นตอนที่ 1. ขันสลักเกลียวที่ตำแหน่งใดก็ได้บนตัวถังรถ. (หากหัวของสลักเกลียวเล็กให้ปรับด้วยแหวนรองเป็นต้น)
ขั้นตอนที่ 2. หลังจากผ่านการเดินสายของเครื่องแล้วให้ติดซีลเวลโครที่ให้มาที่ด้านหลังของเครื่อง Dress up your ETC with a natural tanned leather case!
●Securely fasten the unit
Antenna separation type ETC model.The unit can be fixed firmly and can be mounted on either side of the vehicle depending on the wiring arrangement.MITSUBA ETC(MSC-BE51) is also available.
●No installation bracket required!
Easy to install by tightening the bolts together at any position on the car body!(It can also be attached with the bundling band provided)
●Velcro seal for main unit
Attach the attached Velcro seal to the back of the ETC unit, and the ETC unit can be attached firmly.
●Secure installation with plastic board
The mounting base is made of plastic board to increase strength.There are also holes on both sides for cable ties, so you can wear it with confidence.
●Easy installation
STEP 1. Tighten the bolts to the desired position on the vehicle body.(If the head of the bolt is small, adjust it with a washer, etc.)
STEP 2. After passing the wiring of the unit, attach the attached Velcro seal to the back of the unit.
ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/