Vehicles over 126cc Universalดูเพิ่มเติม
Since it was also attached to the previous Motorcycle, I bought it without worry this time as well.
Especially since the front and back Blinker are protruding on the ZX - 12R, I did not want to leave OEM.
Wiring is somewhat troublesome for installation, but there are not so difficult things, so I think that it is somehow Level that someone who does not have installation experience.
Personally I think that it is cool, but I do not see much in the city surprisingly, so it is superfluous.
Rearreshing around Rear 2nd plan
Refreshing around Rear of GSR 400.
LED Blinker on License Plate Holder
As far as resistance against high flasher prevention is concerned, Japanese Vehicle Inspection Correspondence
Bullet Terminal processing is necessary, but it comes with no problems in particular.
In the case of GSR 400, the Blinker part comes in contact with the Exhaust System, so it is necessary to re-open the mounting hole.
It seems that water seems to be in the hole of the cord taking out so that it is also in other people's report, so Seal processing is done.
I installed it on the 14-year-old ZX-6R. Because it is Sports Type Motorcycle, OEMBlinker has gone and it became integrated with Fender Eliminator, so it looks very good.
Since all the Custom parts are priced, it will be this.
Although it is not as much as dissatisfaction, Wiring extending from the LED part is thick and long, so Quantity : Pair (for Left and Right) Quantity : I had a hard time pulling in 2 pc and putting it under Seat. Because the connection with the car body side also uses WiringTap, this also bulky when the space is narrow. In particular, I think that similar problems will occur in Motorcycle where there is almost no Space under Seat in SS.
First of all, I thought that it was expensive.
If it feels like this I feel like I can not offer it at around 10,000 yen. 1. Wiring does not have Bullet Terminal processing, but it comes with Electro Tap attached, even though it costs 60,000 yen, I wanted this processing to be about as much as this price. Since Electro Tap can not be trusted personally, I install Bullet Terminal by myself.
Next, it is Design but Rear surroundings are refreshing in combination with Fender Eliminator and it fits in a cool looking feeling. It does not interfere with the Side bag, so it will be saved.
However, it is doubtful that Wiring's takeout is from the bottom. It is more convenient to pick up Wiring from the top as usual.
Although it is visibility, I do not know whether I purchased a Clear Lens item, but I can see it well from the back even in the daytime. From the side for the directionality of the LED "You are shining" I understand, but it does not become a feeling that it is bright!. I am installing an auxiliary Blinker for improving the visibility from the side for the time being.
Recent Motorcycle does not need to bit resist resistance for LEDs, but Wiring is assembled on the premise of cheating Ceramic resistance, it is troublesome to bundle, clearly speaking, it is an obstacle. I want you to sell cheaply even 1000 yen for no Kit with resistance.
I think that I went shopping at high prices, but I'm satisfied with the comfort. If there is something to use now, I will add it to Review.
I bought it for installation on the ZX-10R.
Because the friend of ninja 250 riding has installed it imitate w
I also like OEM's Blinker, but I would like to make the Rear around Compact, when putting in and out of a narrow Motorcycle Place the surrounding Poleetc. I will try to replace it to avoid.
○ good point
- Lamp is bright and outstanding visibility (Clear is bright but Smoke is unidentified)
- It looks more refreshing than I thought
- Compared to OEM's Blinker, there is no overhang and it is safe to take out in a narrow place
○ A bad point
- A part of the Reverse side Wiring is posted although it is posted in the photo (Waterproof performance is doubtful)
Wiring Mouth as Cokingetc. I think that you can be more secure if you correspond with
- It is high
- Since it is a plug type connection, trouble occurs, or if contact is sweet, poor contact occurs
Depending on the type of car, if you replace with LED Blinker the resistance changes and High flasher (Abnormal flashing) I wake you..
? You can use it by using the included Ceramic resistor. (No additional fee will be charged)
But Size is quite large so I'm in trouble with the placement and how to put it.
? Or Blinker relay for LED-compatible (example : DAYTONA Blinker relay 69571). (A separate fee is generated)
Recommended because Wiring's cohesion is good. Font Blinker will also be LED compatible. It will cost you a little bit of money...
Connection will break Bullet Terminal premise, Main harness and crimp with Bullet Terminal.
Branch Connector and Receptacle coupleretc. I think it would be nice to connect with.
Wiring is thin so be careful with poor contact!
It is a confirmation to those who purchase
Can you install it other than Active's Fender Eliminator? → Can be installed. It's just an Fit feeling when it's an Active product.
Already already installed Fender Eliminator? → License Plate Light, Reflector is not attached
Wiring is coming out of the Reink side of Blinker so WiringRoute, fixing method, appearance etc.. Be careful with.
Innovative products called Plate integrated Blinker not in other companies, and - - - Japanese Vehicle Inspection Correspondence.
You can ride with peace of mind and how is everyone by all means?