เป็นแหวน NX ดั้งเดิมของ EK ที่มีความทนทานและลดน้ำหนักได้สูงเมื่อเทียบกับแหวน QX
นอกจากนี้ยังทำให้โซ่แข็งแรงขึ้นด้วยการเปลี่ยนรูปร่างของซีล
[คุณสมบัติ]
ใช้รูปทรงแผ่นใหม่สำหรับจาน
มีการปรับปรุงความแข็งแกร่งต่อความต้านทานแรงดึงเมื่อเทียบกับซีรีส์ ZVX ทั่วไปและบุชที่แข็งแรงซึ่งรับประกันอายุการใช้งานที่ยาวนาน
เป็นลูกกลิ้งแข็งที่มีความทนทานสูง
ปักหมุดทั้งสี่ด้าน
เป็นแผ่นโลหะผสมพิเศษ
ใช้รูแผ่นด้านในเพื่อลดน้ำหนัก
เป็นจาระบี PTFE ชนิดพิเศษที่มีการยึดเกาะที่ดีเยี่ยมและช่วยเพิ่มความทนทานต่อการสึกหรอ
ZVX3 : ชั้นสูงสุดความแข็งแรงสูงความทนทานสูงห่วงโซ่ NX น้ำหนักเบา. เป็นโซ่ซีล NX ที่มีการเคลื่อนที่ของเครื่องยนต์สูงมีความแข็งแรงสูงทนทานสูงและน้ำหนักเบาเข้ากันได้กับเครื่องจักรกำลังสูง
EK's original NX ring is more durable and lighter than the QX ring.
In addition, the shape of the seal has been changed to increase the strength of the chain.
[Features]
・New plate shape is adopted for the plate
・Solid bushes with improved tensile strength and longer life than the conventional ZVX series
・High durable solid roller
・Four-way caulking pins
・Special alloy plate
・Adopts inner plate hole for the reduction of weight
・Special PTFE grease has excellent adhesive strength and contributes to improved wear resistance
ZVX3: Top quality, high strength, high durability, light weight NX ring chain.High strength, high durability and light-weight NXseal chain for large displacement, high power machines.
For safe use
If a defective EK Chain product is found and confirmed by EK Chain, the EK Chain product will be delivered free of charge as soon as possible.
(1) Costs required to remove and install EK chain products from the customer's vehicle for replacement or repair, and costs incidental thereto (sprockets, hub dampers, etc.)
(2) The cost of transporting the customer's vehicle to the repair shop
(3) The customer's lost profits and other extended damage costs resulting from defects or repairs
(There is a shipping date stamp inside the product package)
Not available in person.
●In case of additional processing to the chain.
●In the event that a person without maintenance qualifications or equivalent knowledge and experience installs the product by himself / herself.
(Please ask a motorcycle specialist to install the chain.)
●If the chain is not installed in the correct way without using the special tools.(When cutting the chain, do not use a sander, iron, etc.)
●If the chain size is changed (converted) or used outside the applicable displacement range.
Even if you convert within the usable displacement of the chain, you can't convert the size down from the stock size
Life expectancy is lower than conventional sizes.
(For the compatibility of the chain, please check the EK chain model compatibility chart.)
●If the joint to be used is not the same size and grade as the chain.
●If the chain is exposed to acid, alkali or pattery fluid.
(Discontinue use immediately and replace with a new one.)
●If the chain is not used with the correct amount of slack (deflection).
(Please adjust according to the values listed in the service manual of the vehicle.)
●If chain maintenance is not carried out regularly.
Use EK Chain Cleaner and EK Chain Lube for cleaning and refueling every 500km and after riding in the rain or on rough roads.Never use volatile solvents such as kerosene or gasoline for parts cleaners, especially for sealing chains.(Products such as chain and parts cleaners will also damage the seals)
●When the chain is contaminated with chlorinated substances such as snow-melting agents.
●This product is for use only in Japan and not for use overseas.
●If the chain has rust, scratches, misalignment of the sprockets, or other twists caused by the above.(Replace the chain with a new one immediately)
●If the product is used in a condition where there is abnormal noise or interference with the vehicle body during riding.(Please replace the chain with a new one after solving the cause)
●When the chain is replaced, the front sprocket, rear sprocket, hub damper and other related parts are not replaced at the same time.
●If the sprocket to be used is changed from the stock sprocket to a sprocket with a drastically increased or decreased number of teeth.
(This may shorten the life of the chain)