หน้าแรก

【HenlyBegins】การ์ดซับในข้อศอก DP511

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿1,420
คะแนนวีไบค์: 14

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

ขนาด : ฟรี

[คำอธิบาย]

[คำเตือน]

* ช่วงที่สอดคล้องกันคือมาตรฐาน. โปรดทราบว่าความรู้สึกของความเหมาะสมมีความแตกต่างกัน

[รายละเอียดสินค้า]

วัสดุ : 2WAY Knit, Power Mesh, SAS-TEC Protector

•ตัวป้องกันในตัวผลิตโดย SAS-TEC ผู้ผลิตตัวป้องกันฟังก์ชันสูงของเยอรมัน. เป็นตัวป้องกันที่เบาและอ่อนนุ่มทำจากวัสดุดูดซับแรงกระแทกสูง. ได้รับมาตรฐานความปลอดภัยของยุโรปและมาตรฐาน CE
•ตัวป้องกันในตัวสามารถถอดออกได้. ส่วนของผ้าสามารถซักด้วยมือได้
•ด้านในของแขนถูกตาข่ายเพื่อลดความอับชื้น
•ชุดซ้าย / ขวา

[ขนาด]
ขนาดสินค้า / ความยาวรวม 330 มม., ข้อมือ 80 มม., ต้นแขนด้าน 110 มม
ระยะการใช้งานของแนวทาง / ข้อมือประมาณ 165-240 มม. ด้านบนแขนประมาณ 225-330 มม

รีวิวสินค้า

    At the beginning of purchase I thought that I bought a good thing because the feeling of Fit was very good and Protection never had any problem. But as we continue to use it (OffRoad course several times) Gap is getting worse gradually. I think that ArmSleeve has extended but did not have even one course around Course After all it was impossible for Hard movement unless it was Belt type thing?
    I was using objects that I kept at Belt in the former X shape, but if I did not misalign it, the feeling of tightening was intense and it caused the arm to rise. So it is disappointing that there is nothing to adjust the tightening although I agree with Concept which holds gently as a whole like Sleeve like this Guard.
    I am asking my wife now to change it so that we can sew the Elastic band with Surface Fastener and adjust the tightening. It is under trial and error to make it a thing with less tightening feeling that does not rise while the arm is not Gap.

    At the beginning of purchase I thought that I bought a good thing because the feeling of Fit was very good and Protection never had any problem. But as we continue to use it (OffRoad course several times) Gap is getting worse gradually. I think that ArmSleeve has extended but did not have even one course around Course After all it was impossible for Hard movement unless it was Belt type thing?
    I was using objects that I kept at Belt in the former X shape, but if I did not misalign it, the feeling of tightening was intense and it caused the arm to rise. So it is disappointing that there is nothing to adjust the tightening although I agree with Concept which holds gently as a whole like Sleeve like this Guard.
    I am asking my wife now to change it so that we can sew the Elastic band with Surface Fastener and adjust the tightening. It is under trial and error to make it a thing with less tightening feeling that does not rise while the arm is not Gap.

    I used it for Motocross competition use.
    Arm was thin, so I came out with InnerPad while driving, and there was a position Gap of Protector.
    Since the Pad storage bag is only the folding back of the fabric, the addition of Magic tape settled InnerPad out, but the position gap could not be resolved.
    Simple is nice, but I think that with Adjusting Function is better as Motocross and for Off-Road.
    Those who are perfect for Size may be a problem...

    I used it for Motocross competition use.
    Arm was thin, so I came out with InnerPad while driving, and there was a position Gap of Protector.
    Since the Pad storage bag is only the folding back of the fabric, the addition of Magic tape settled InnerPad out, but the position gap could not be resolved.
    Simple is nice, but I think that with Adjusting Function is better as Motocross and for Off-Road.
    Those who are perfect for Size may be a problem...

    I bought it for attaching under Jacket.

    Protector is a soft material, it feels like Fit to the arm, it comes with firm bending and stretching.
    It was so thin that I did not feel a sense of incompatibility when wearing it under Jacket.

    We also have products of 4R, so compare to reference.
    - Cloth part
    Length 31cm(4R : 28. 5 cm), width 11 cm (4 R : 12. 5cm)
    Mesh on the inside both sides, the material that extends well throughout is the same.
    4R is shinier cloth, I feel a little smooth.

    - Protector
    Length 13cm(4R : 14. 5 cm), width 9. 5cm(4R : 10cm)
    I am Fit to the arm because it is soft, but I feel that 4R is thicker and firmer and has a sense of security.

    - When attached to the arm
    The Protector storage port is structured to cover the Protector, but Protector will move if it does not pull it well, so you need to adjust the position after installation.
    Velcro of 4R's Protector storage port works unexpectedly, and Protector can be mounted without misalignment.

    - Feeling of fit
    Once attached, both products can be used without misalignment.
    It is Mesh so it will not sticky in summer, it's cool.
    (4R is slightly rounded because the fabric part at the top of Protector is short. )
    When wearing a short sleeve, the fabric is long, Protector is also thin, so the part covering the arm from 4R is a wide feeling.

    I bought it for attaching under Jacket.

    Protector is a soft material, it feels like Fit to the arm, it comes with firm bending and stretching.
    It was so thin that I did not feel a sense of incompatibility when wearing it under Jacket.

    We also have products of 4R, so compare to reference.
    - Cloth part
    Length 31cm(4R : 28. 5 cm), width 11 cm (4 R : 12. 5cm)
    Mesh on the inside both sides, the material that extends well throughout is the same.
    4R is shinier cloth, I feel a little smooth.

    - Protector
    Length 13cm(4R : 14. 5 cm), width 9. 5cm(4R : 10cm)
    I am Fit to the arm because it is soft, but I feel that 4R is thicker and firmer and has a sense of security.

    - When attached to the arm
    The Protector storage port is structured to cover the Protector, but Protector will move if it does not pull it well, so you need to adjust the position after installation.
    Velcro of 4R's Protector storage port works unexpectedly, and Protector can be mounted without misalignment.

    - Feeling of fit
    Once attached, both products can be used without misalignment.
    It is Mesh so it will not sticky in summer, it's cool.
    (4R is slightly rounded because the fabric part at the top of Protector is short. )
    When wearing a short sleeve, the fabric is long, Protector is also thin, so the part covering the arm from 4R is a wide feeling.

สินค้าที่มีผู้เข้าชมมากที่สุด

【LEATT BRACE】3DF 6.0 Elbow
การ์ดศอก LEATT BRACE
【LEATT BRACE】[Kids/Junior] 3DF HYBRID Elbow
การ์ดศอก LEATT BRACE
【LEATT BRACE】3DF 6.0 Elbow
การ์ดศอก LEATT BRACE
【LEATT BRACE】3DF 5.0 Elbow
การ์ดศอก LEATT BRACE
【LEATT BRACE】CONTOUR Elbow
การ์ดศอก LEATT BRACE
【HONDA RIDING GEAR】Stealth CE Elbow Guard [Hard]
หุ้มข้อศอก HONDA RIDING GEAR
【LEATT BRACE】3DF 5.0 Elbow
การ์ดศอก LEATT BRACE
【LEATT BRACE】[Kids/Junior] CONTOUR Elbow
การ์ดศอก LEATT BRACE