หน้าแรก

【GIVI】E135 Stop lamp for V47

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿3,040
คะแนนวีไบค์: 30

ตรงรุ่น:

V47 GIVI

ดูเพิ่มเติม

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คำเตือน]

* ต้องใช้กระบวนการเปิดรูลวดในกล่อง

[รายละเอียดสินค้า]

อะไหล่เสริมสำหรับ V47

ตรงรุ่น

    • V47 GIVI

รีวิวสินค้า

    There is only OEM Product, LED Pitch is in Reflector hole Pitch of installation place and it looks properly.
    However, Wiring to the lid contacts is a parting pattun unless Wiring far from the contact side is well wired due to the Length of the Limit, or Wiring of the contacts can not take into consideration the capture of four Wiring intake ports Because it is hard to pass through, extend and do Quantity : 2 pc capture.

    This time Kawasaki OEMTop case (OEM of V47) Although it is used for OEMMonokey base, Case side can be used as it is, but base side does not consider contact setting, so it is necessary to direct wiring without boring processing or using contacts.
    Well Kawasaki does not have a premise, so it can not be helped.

    There is only OEM Product, LED Pitch is in Reflector hole Pitch of installation place and it looks properly.
    However, Wiring to the lid contacts is a parting pattun unless Wiring far from the contact side is well wired due to the Length of the Limit, or Wiring of the contacts can not take into consideration the capture of four Wiring intake ports Because it is hard to pass through, extend and do Quantity : 2 pc capture.

    This time Kawasaki OEMTop case (OEM of V47) Although it is used for OEMMonokey base, Case side can be used as it is, but base side does not consider contact setting, so it is necessary to direct wiring without boring processing or using contacts.
    Well Kawasaki does not have a premise, so it can not be helped.

    When I was carrying M1100, I dared to purchase V47 and follow cars (especially Large type Trucketc. ) To make the Stop lamp easy to see.

    As expected, in the third year, poor contact points will come up.

    One is that the Case Body and the upper lid skimmer become Large and the Switch is not pushed in.
    (This is handled by disconnecting the switch and connecting it directly with Wiring)

    The second is that the Switch that brings the Base side and the Case side into contact has been shaved.
    (It is not possible to directly connect trace because it is often removed)

    Since Switch seems to be useless first than LED Lamp, than to panic before Touring
    In terms of purchasing while there is a budget.

    When I was carrying M1100, I dared to purchase V47 and follow cars (especially Large type Trucketc. ) To make the Stop lamp easy to see.

    As expected, in the third year, poor contact points will come up.

    One is that the Case Body and the upper lid skimmer become Large and the Switch is not pushed in.
    (This is handled by disconnecting the switch and connecting it directly with Wiring)

    The second is that the Switch that brings the Base side and the Case side into contact has been shaved.
    (It is not possible to directly connect trace because it is often removed)

    Since Switch seems to be useless first than LED Lamp, than to panic before Touring
    In terms of purchasing while there is a budget.

    I do not remove it once attached, but the installation was Large strange anyway.
    Particularly troublesome is where LED Wiring is attached to the terminal on the lid side.
    It was frustrating Game.
    The action is fulfilling enough function.

    I was concerned not being instructed to interlock with Stop lamp in the translation (Please enter here, Instruction Manual.
    You should not turn on the High mount all the time, do you?
    I wonder if I should write it properly.

    Also, this is also the translation (please enter here Instruction Manual but I have not written about the color of Wiring.
    The original also has colors written.
    I think that is important, but why do not you write?

    I want you to lower the price a bit further.

    I do not remove it once attached, but the installation was Large strange anyway.
    Particularly troublesome is where LED Wiring is attached to the terminal on the lid side.
    It was frustrating Game.
    The action is fulfilling enough function.

    I was concerned not being instructed to interlock with Stop lamp in the translation (Please enter here, Instruction Manual.
    You should not turn on the High mount all the time, do you?
    I wonder if I should write it properly.

    Also, this is also the translation (please enter here Instruction Manual but I have not written about the color of Wiring.
    The original also has colors written.
    I think that is important, but why do not you write?

    I want you to lower the price a bit further.

สินค้าที่มีผู้เข้าชมมากที่สุด