Please login to check coupons
จำนวน
สินค้าแท้ 100%
รับประกัน 7 วัน
รับเงินคืนฟรี
ราคาสุทธิ
ใช้สำหรับรุ่น
ดูทั้งหมด
CB1100 -12 SC65 (except for the up-handed model ABS vehicle)
CB1300 SF 03-09 (except ABS model)*Processing of switch hole drilling required|*Side cap required (for inner diameter 18mm)
CB1300SUPER BOLDOR 10-12 *Processing to drill the switch hole is required|*Modification of the side cap (for 18mm ID)|*Required to change the brake hose.
FTR223 (with side numbers) *Processing of switch holes required
แสดงเพิ่มเติม
250TR -06 *Processing of switch holes required
W400 *Required Switch Hole Drilled
ZrX1200ZrX1200 DAEG *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
แสดงเพิ่มเติม
RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
GRASS TRACKER -08 (Carburetor)*Side caps can be used as stock.
GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones.
GRASS TRACKER Big Boy -08 (Carburetor)*Side caps can be used as stock.
GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
แสดงเพิ่มเติม
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
สีของแฮนด์บาร์: เคลือบโครเมียม[ข้อมูลจำเพาะของแฮนด์บาร์]
แฮนด์บาร์: เหล็กดำ/เส้นผ่าศูนย์กลางด้านนอกΦ22.2mm/เส้นผ่าศูนย์กลางด้านใน Φ18mm
สามารถใช้สายเคเบิ้ลเดิมได้และท่อต่างๆ
[ขนาดของแฮนด์บาร์]
ความสูงทั้งชิ้น: 75mm
ความกว้างของทั้งชิ้น: 800mm
ระยะห่างตรงกึ่งกลางของตุ๊กตาสองตัว: 150mm
โน้มไปข้างหลัง: 200mm
มุมด้านใน: 35-องศา
ทำมุม: 70-องศา
รายละเอียดคำถาม
ผ้าคอตตอน 100% ผลิตในประเทศญี่ปุ่น. เป็นเครื่องต้นแบบการยืนยันการติดตั้งการผลิตจำนวนมากได้รับการจัดการอย่างต่อเนื่องโดย บริษัท ของเรา. เป็นมือจับที่ได้รับความสนใจเป็นอย่างมากเช่นการเลือกใช้วัสดุอย่างพิถีพิถันการขัดหลายชนิดการตอกหมายเลขชิ้นส่วนการดัดและการเชื่อมที่มีความแม่นยำสูงการเคลือบผิวคุณภาพสูงจากเทคโนโลยีและบุคลากรที่ได้รับการปลูกฝังจากผู้เชี่ยวชาญมาหลายปี ที่ Higashi Osaka. ใช้วัสดุเหล็ก STKM13A ที่ทนต่อแรงดึงได้ดีเยี่ยม. เป็นการล้างค่ามาตรฐานความปลอดภัย JMCA. เป็นการชุบนิกเกิลโครเมียมสามชั้น (ชั้นนิกเกิล + โครเมียม 3 ชั้น) เคลือบด้วยฟิล์มหนาทนทานและทนต่อการกัดกร่อนได้ดีเยี่ยม
คำอธิบาย
คลิกที่นี่เพื่อดูสีอื่น ๆ
รายการขนาดด้ามจับปกติสำหรับสกูตเตอร์รุ่นอเมริกัน 7/8
รายการขนาดด้ามจับปกติสำหรับรุ่นอเมริกา 1 นิ้ว
รายการขนาดด้ามจับปกติสำหรับรุ่นอเมริกา 1 "
คำเตือน
*ตัวหนีบแฮนด์บาร์ (ตัวยึดหรือเสา) ในภาพไม่รวมอยู่ในผลิตภัณฑ์
*สัญลักษณ์ขนาดใช้สำหรับเวลาแนวนอน
*หากมีการเปลี่ยนแปลงโครงสร้างจะต้องมีการเปลี่ยนแปลง เปลี่ยนความสูงเกิน ± ความกว้าง 40 มม. ± 20 มม. จากขนาดตัวรถที่อธิบายไว้ในเอกสารยืนยันตัวรถ
*ผลิตภัณฑ์ในภาพอาจมีสี/ประเภทอื่นๆ
ใช้สำหรับรุ่น
CB1100 -12 SC65 (except for the up-handed model ABS vehicle)
CB1300 SF 03-09 (except ABS model)*Processing of switch hole drilling required|*Side cap required (for inner diameter 18mm)
CB1300SUPER BOLDOR 10-12 *Processing to drill the switch hole is required|*Modification of the side cap (for 18mm ID)|*Required to change the brake hose.
FTR223 (with side numbers) *Processing of switch holes required
แสดงเพิ่มเติม
250TR -06 *Processing of switch holes required
W400 *Required Switch Hole Drilled
ZrX1200ZrX1200 DAEG *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
แสดงเพิ่มเติม
RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
GRASS TRACKER -08 (Carburetor)*Side caps can be used as stock.
GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones.
GRASS TRACKER Big Boy -08 (Carburetor)*Side caps can be used as stock.
GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
แสดงเพิ่มเติม
TW200 -99 (Drum brake models) * Clutch cable must be changed.
TW200E -99 (Drum brake models) * Clutch cable must be changed.
TW200E 00- (Disc brake models) *Processing of the switch hole is required|*It is necessary to change the installation of the clutch cable.
TW225E 00- (Disc brake models) *Processing of the switch hole is required|*It is necessary to change the installation of the clutch cable.
แสดงเพิ่มเติม