【HURRICANE】Flat Continental Type-3 Φ7/8-Inches Handlebar Steel

Name: Flat Continental Type-3 Φ7/8-Inches Handlebar Steel
Brand: HURRICANE
SKU: 2074389
Price: 1395.000000 ฿
Availability: InStock
Rating: 05 (1 reviews)

แบรนด์: HURRICANE
ยอดรวม 1 รีวิว

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง

ราคาเต็ม： ฿1,395

คะแนนวีไบค์: 14

Shipping point: 57.5 pts ( 57.5 pts x 1qty)

- รหัสสินค้า：
- HB0063B-01

ระบบกำลังคำนวณวันที่พร้อมจัดส่ง.....

จำนวน

เพิ่มเข้าในรายการที่ต้องการ

ขั้นตอนการสั่งสินค้า

ตรงรุ่น:

CB1300 SF 03-09 *Processing of switch holes required|* Required side cap (for 18mm ID)

CB1300SUPER BOLDOR 05-09 *Processing of switch hole required|* Required side cap (for 18mm ID)

CB1300SUPER BOLDOR 10-12 *Processing of switch holes required|* Required side cap (for 18mm ID)

250TR -06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder.

W400 *Required Switch Hole Drilled

W800 *Required Switch Hole Drilled

GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.

RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.

ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock.

ดูเพิ่มเติม

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

Handlebar color: Black

[Handlebar specification]
Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
・Stock cables and hoses can be installed on as is

[handlebar size]
Total height: 75mm
Full width: 690mm
Effective width of holder installation part: 130mm
Pullback size: 145mm
Insertion angle: 30 degrees
Forward leaning angle: 70 degrees

[คำอธิบาย]

For the list of optional parts such as cables
.
.
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart

[คำเตือน]

*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.

*Images may contain other colorings and types.

[รายละเอียดสินค้า]

Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Double anti-corrosion treatment by acrylic coating over black chrome plating.

ติดต่อสอบถาม

ตรงรุ่น

- CB1300 SF 03-09 *Processing of switch holes required|* Required side cap (for 18mm ID)
- CB1300SUPER BOLDOR 05-09 *Processing of switch hole required|* Required side cap (for 18mm ID)
- CB1300SUPER BOLDOR 10-12 *Processing of switch holes required|* Required side cap (for 18mm ID)
- CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID)
- CB400SF 08-21 NC42 VTEC Revo *Requires switch hole drilling|*Requires side cap (for inner diameter 18mm)
- CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID)
- CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID)
- CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)
- CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter)
- CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
- FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
- FTR223 (with side numbers) * Requires modification of the clutch cable and choke cable.
- NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter)
- VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID)
- VTR250 09-12 MC33 (1300001-)(FI car) *Processing to drill switch hole is required|* Required side cap (for 18mm diameter)
- APE 100 -12 (drum brake)*APE100 (09-) requires drilling of switch holes.
- APE 50 -07|08 (Carburetor)*APE100 (09-) only
- APE 50 08-12 (FI Drum Brake) *Processing of switch holes is required
- HORNET250 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- MONKEY 09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
- MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
แสดงทั้งหมด
- 250TR -06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder.
- W400 *Required Switch Hole Drilled
- W800 *Required Switch Hole Drilled
- ZRX1100 *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
- ZRX1100II *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ZRX1200R *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
- ZrX1200ZrX1200 DAEG *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
- ZRX400 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ZRX400II *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ESTRELLARSCustom 96-99 *Processing of switch hole required|* Required side cap (for 18mm ID)
- ZEPHYR400 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- BALIUS 91-94 *Processing of switch hole required|* Required side cap (for 18mm diameter)
- BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
แสดงทั้งหมด
- GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
- ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock.
- ST250 E Type -07 NJ4AA *Processing of switch holes required|* Normal side caps can be used.
- GSX400 05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap.
- GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones.
- GRASS TRACKER Big Boy -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
แสดงทั้งหมด
แสดงทั้งหมด
- Universal

ลิ้งค์หน้ารุ่นรถ

รีวิวสินค้า

5.0

1 รีวิวสินค้า

5	สมบูรณ์แบบ	1
4	ดีมาก	0
3	ตกลง	0
2	แย่	0
1	แย่มาก	0

แสดงความคิดเห็น

แฮนด์บาร์สแตนเลสยกสูง แบบที่ 3 Φ 7/8 นิ้ว

HURRICANE

23 Oct 2018

แฮนด์บาร์สแตนเลสยกสูง แบบที่ 3 Φ 7/8 นิ้ว

ใช้กับรุ่นรถ: HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250,

KiiM