【HURRICANE】ตุ๊กตาแฮนด์แต่งตัดเข้ารูป
- แบรนด์: HURRICANE
- ยอดรวม 2 รีวิว
สินค้าที่เกี่ยวข้อง
รายละเอียดสินค้า
[คุณสมบัติของสินค้า]
ใช้ร่วมกับ Φ7/8-นิ้ว, Φ1-นิ้ว แฮนด์บาร์.
[คำอธิบาย]
[คำเตือน]
* สีมีการเปลี่ยนแปลงขึ้นอยู่กับล็อตการสั่งซื้อ
* มีบางกรณีที่มีสีอื่น ๆ และประเภทอื่น ๆ ในภาพถ่าย
[รายละเอียดสินค้า]
ตรงรุ่น
-
- MSX125 (GROM) MSX125
- CB1100 -12 SC65 (except for the up-handed model ABS vehicle)
- MONKEY 09-12 (AB27-1900001-)(FI model)
- HORNET250
- APE 50 08-12 (FI Drum brake vehicles)
-
- Universal
-
- GRASS TRACKER Big Boy 09-12 (FI cars)
- GRASS TRACKER Big Boy -08 (Carburetor type)
- GRASS TRACKER 09-12 43355(FI car)
- GRASS TRACKER -08 -8(Carburetor models)
- GSX400 05-07 GK7CA
-
- BALIUS2
- BALIUS 91-94
- ZEPHYRX
- ZEPHYR750 RS
- ZEPHYR750
รีวิวสินค้า
-
3.0
2 รีวิวสินค้า
-
สมบูรณ์แบบ ดีมาก ตกลง แย่ แย่มาก - แสดงความคิดเห็น
J
Handlebar Hole Drilling Guide
In the case of the Handlebar of an external article, there is no hole open since a Switch box etc. are fixed (unless it is some exclusive elegance very much) for baffles to a pure thing.
Although some
> people will cut off the projection by the s
In the case of the Handlebar of an external article, there is no hole open since a Switch box etc. are fixed (unless it is some exclusive elegance very much) for baffles to a pure thing.
Although some
> people will cut off the projection by the side of a VOX with Nippers etc., this is a dramatically dangerous thing.
Although there is also a method of fixing with a Firmly with the polyester system adhesive bond of a 2 liquid hybrid model, when it is s, if a Handlebar is replaced again and it excels, naturally the whole Switch box will be called exchange.
When getting it blocked and replacing a Handlebar, it is necessary to process drilling using a Drill but, and if it is a product made from an Aluminum, the work which makes a hole in a Pipe vertically better about what has high rigidity is as difficult as unexpected.
Even if it is carrying out the Marking to the part to make the
> hole in, once a Drill is slippery during work and a strike shifts, it will become next to impossible to add correction to the place aimed at once again from there.
If the
> hole is extended, and a fixed meaning will not be accomplished and it will become so, about a Switch box, a compromise is reached in the bent position, or there is only newly rebuying a Handlebar.
It must be better to make appropriate investment rather than he repents without buying it, although it does not use frequently.
After fixing to a Handlebar with the 6-mm Hex Bolt in right and left, this product tightens lightly a central penetration Bolt (the hole of the diameter of 5 mm is open), and inserts a drill edge by considering that hole as a Guide.
Although many hours are firmly spent before
work and that it is necessary to carry out a Marking does not change, the drilling itself can be performed now certainly successful.
Since it is called the product made from
HURRICANE, it is a fly in the ointment that it is price setting out to the extent that a Handlebar can buy one more, but.
Since an equivalent device practically equal exists in user-friendliness at a half-the-sum grade or the price not more than it, I regard how to twist the prejudice to Brando as or enough with such goods.
J
Handlebar Hole Drilling Guide
In the case of the Handlebar of an external article, there is no hole open since a Switch box etc. are fixed (unless it is some ...
In the case of the Handlebar of an external article, there is no hole open since a Switch box etc. are fixed (unless it is some exclusive elegance very much) for baffles to a pure thing.
Although some
> people will cut off the projection by the side of a VOX with Nippers etc., this is a dramatically dangerous thing.
Although there is also a method of fixing with a Firmly with the polyester system adhesive bond of a 2 liquid hybrid model, when it is s, if a Handlebar is replaced again and it excels, naturally the whole Switch box will be called exchange.
When getting it blocked and replacing a Handlebar, it is necessary to process drilling using a Drill but, and if it is a product made from an Aluminum, the work which makes a hole in a Pipe vertically better about what has high rigidity is as difficult as unexpected.
Even if it is carrying out the Marking to the part to make the
> hole in, once a Drill is slippery during work and a strike shifts, it will become next to impossible to add correction to the place aimed at once again from there.
If the
> hole is extended, and a fixed meaning will not be accomplished and it will become so, about a Switch box, a compromise is reached in the bent position, or there is only newly rebuying a Handlebar.
It must be better to make appropriate investment rather than he repents without buying it, although it does not use frequently.
After fixing to a Handlebar with the 6-mm Hex Bolt in right and left, this product tightens lightly a central penetration Bolt (the hole of the diameter of 5 mm is open), and inserts a drill edge by considering that hole as a Guide.
Although many hours are firmly spent before
work and that it is necessary to carry out a Marking does not change, the drilling itself can be performed now certainly successful.
Since it is called the product made from
HURRICANE, it is a fly in the ointment that it is price setting out to the extent that a Handlebar can buy one more, but.
Since an equivalent device practically equal exists in user-friendliness at a half-the-sum grade or the price not more than it, I regard how to twist the prejudice to Brando as or enough with such goods.
