หน้าแรก

【HURRICANE】ขายึดอุปกรณ์ เสริม

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿1,264
คะแนนวีไบค์: 13

ตรงรุ่น:

Universal

ดูเพิ่มเติม

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

อลูมิเนียม/เหล็กสเตนเลส
สำหรับติดตั้งเครื่องไอโซเรชั่น ETC (JRM-11) ใช้ร่วมกับ/สำหรับ Φแฮนด์บาร์ 7/8 นิ้ว
สามารถปรับเปลี่ยนตำแหน่งติดตั้งได้
สามารถใส่กับแขนจับแฮนด์บาร์ขนาด Φ22

ตรงรุ่น

    • Universal

รีวิวสินค้า

    Mistuba's MSC-BE 700 E (ETC2) We used Antennas and Indicator to attach to the Left Side of Handlebar.
    Usability was very good with the Large size just feeling good.
    But the price is expensive.

    as [ be / already / a Compact / somewhat sufficient as the board which sticks an ETC antenna ] (in the direction [ Especially ] of order) It worries about whether it will delete with the
    sanding machine, or it leaves as it is, and is inside.

    as [ be / already / a Compact / somewhat sufficient as the board which sticks an ETC antenna ] (in the direction [ Especially ] of order) It worries about whether it will delete with the
    sanding machine, or it leaves as it is, and is inside.

    He wanted to make an ETC antenna & Indicator into a Handle mount, and it was purchased. Although that made from
    DAYTONA was also considered, it is decided in respect of a price that it will be a KIJIMA.
    (compactness -- if -- although it is DAYTONA ...) --
    > -- use good point
    and Bracket -- use an antenna installation part -- there is wall thickness of a component firmly --
    There is likely to be intensity. The degree of freedom of
    and installation is high. (Although joint form is bad and a motion has restriction in part, it will OK, if the
    joint is deleted) Although bad


    point
    and Laser cut are carried out, since it does not bevel, the BALI remains, and it is
    . Those with a possibility that it may be suddenly injured. Considering only
    and an ETC antenna, an Antennas setting face is too large. If it manufactures with an Aluminum in itself (except for Screws) and alumite treatment is carried out, a color
    Variation will also increase and I will think that it is by OK. [
    > ]

    He wanted to make an ETC antenna & Indicator into a Handle mount, and it was purchased. Although that made from
    DAYTONA was also considered, it is decided in respect of a price that it will be a KIJIMA.
    (compactness -- if -- although it is DAYTONA ...) --
    > -- use good point
    and Bracket -- use an antenna installation part -- there is wall thickness of a component firmly --
    There is likely to be intensity. The degree of freedom of
    and installation is high. (Although joint form is bad and a motion has restriction in part, it will OK, if the
    joint is deleted) Although bad


    point
    and Laser cut are carried out, since it does not bevel, the BALI remains, and it is
    . Those with a possibility that it may be suddenly injured. Considering only
    and an ETC antenna, an Antennas setting face is too large. If it manufactures with an Aluminum in itself (except for Screws) and alumite treatment is carried out, a color
    Variation will also increase and I will think that it is by OK. [
    > ]

    He wanted to carry out the Handle mount of the Antennas of an Antennas discrete type, and it equipped with it.
    Kana which was the cheapest although the DAYTONA and the Bosch were also taken out to the same product A degree of freedom is in the
    fixing position and an angle, and it does not take pains over wearing. Structure is also solid and it can fix firmly.

สินค้าที่มีผู้เข้าชมมากที่สุด

【KIJIMA】Camera Stay For Dr. Recorder
Camera Stay For Dr. Recorder KIJIMA ZX-25R
【KIJIMA】ETC Case Mounting Bracket
ETC Case Mounting Bracket KIJIMA BONNEVILLE BOBBER
【KIJIMA】Camera Stay For Drive Recorder
Camera Stay For Drive Recorder KIJIMA GSX250R