อกล่าง RS

  • รหัสสินค้า: 0-42-CUFX1213

    ฿21,800

    คะแนนวีไบค์: +218 pt

    ข้อมูลการจัดส่ง

    • กรุณาเลือกตัวเลือกของสินค้า
    ถึง ThaiLand
    เปลี่ยน
    เลือกที่อยู่:
    ThaiLand
    ค่าจัดส่ง ฿100

    จำนวน

    สินค้าแท้ 100% รับประกัน 7 วัน รับเงินคืนฟรี ราคาสุทธิ

    ใช้สำหรับรุ่น

    ดูทั้งหมด
    HONDA
    CBR250R 11- (MC41)

    รายละเอียดสินค้า

    รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

    รายละเอียดคำถาม

    ปรับการไหลเวียนของอากาศใต้ตัวถังและการออกแบบที่ใหญ่โตเปลี่ยนรูปแบบของตัวถัง "RS Under Cowl". มีโครงสร้างชิ้นเดียวที่ไร้รอยต่อซึ่งสามารถติดตั้งได้อย่างแน่นหนาด้วยตัวยึดพิเศษที่ให้มาและสามารถถอดออกได้ง่ายในระหว่างการบำรุงรักษาเช่นการเปลี่ยนถ่ายน้ำมันเครื่อง

    ใช้สำหรับรุ่น

    HONDA
    CBR250R 11- (MC41)

    ทบทวน

    4.2

    / 5

    (24 ทบทวน)

    7

    15

    2

    0

    0

    กรอง:
    เลือกดูจาก:

    Under Cowl vtr250

    01 Feb 2023
    5.0
    I am satisfied with the large size of the body, and I am able to install the realize exhaust system without any interference.

    Instruction Manualetc. is also included. 14mm, 10mm and 8mm Combination wrench and Phillips Screwdriver are all you need to install. 14mm is used to fix Stud bolt, so Quantity:It is better to have 2pcs. (It is also possible with one side MONKEY Wrench)
    ดูรายละเอียด
    ฉันพอใจกับขนาดตัวถังที่ใหญ่ และสามารถติดตั้งระบบไอเสียจริงได้โดยไม่มีสิ่งรบกวนใดๆ

    คู่มือการใช้งาน ฯลฯ รวมอยู่ด้วย คุณต้องติดตั้งประแจรวม 14 มม. 10 มม. และ 8 มม. และไขควงปากแฉก 14 มม. ใช้สำหรับยึดสตั๊ดโบลต์ ดังนั้นปริมาณ: ควรมี 2 ชิ้น (สามารถใช้ประแจ MONKEY ด้านเดียวได้เช่นกัน)
    ดูรายละเอียด
    แสดงที่มา

    Although neither a function nor an effect is known, the motorcycle itself becomes tight and appears and it is cool.

    14 Jul 2022
    4.0
    Although neither a function nor an effect is known, the motorcycle itself becomes tight and appears and it is cool. ดูรายละเอียด
    แม้ว่าจะไม่รู้จักฟังก์ชันหรือเอฟเฟกต์ แต่ตัวรถมอเตอร์ไซค์เองก็แน่นและปรากฏขึ้นและเท่ ดูรายละเอียด
    แสดงที่มา

    There are difficulties in Fitting

    07 Mar 2018
    3.0
    I bought it with Side cowl and set.
    It was a commodity that fixed four places with Bolt, but the hole did not match even if it was fitted, and it opened again with Drill.
    Also, the flat part of the seat part of the Bolt fixed part is bad and the FRP cracks when tightened with Bolt with the attached seat gold, so we chew the Rubber Washer on both sides of Cowl and tighten it with Bolt that applied Screw lock.
    Also, there was a part in contact with the lower part of Rear suspension and Oil cooler, and it was shaped by Grinder and Leutor.
    I think that it is a commodity that requires some preparedness for those who are expecting pounding.
    ดูรายละเอียด
    ฉันซื้อมันมากับครอบข้างและชุด
    มันเป็นสินค้าที่ยึดสี่ตำแหน่งด้วย Bolt แต่รูไม่ตรงกันแม้ว่าจะติดตั้งแล้วและเปิดอีกครั้งด้วยสว่าน
    นอกจากนี้ ส่วนแบนของส่วนที่นั่งของส่วนยึดโบลท์นั้นไม่ดี และ FRP แตกเมื่อขันให้แน่นด้วยโบลต์ด้วยเบาะสีทองที่ติดมา เราจึงเคี้ยวแหวนรองยางทั้งสองด้านของครอบและขันให้แน่นด้วยโบลท์ที่ใช้สกรูล็อค .
    นอกจากนี้ยังมีส่วนที่สัมผัสกับส่วนล่างของช่วงล่างด้านหลังและออยคูลเลอร์ ซึ่งถูกสร้างโดย Grinder และ Leutor
    ฉันคิดว่ามันเป็นสินค้าที่ต้องเตรียมพร้อมสำหรับผู้ที่คาดว่าจะห้ำหั่น
    ดูรายละเอียด
    แสดงที่มา

    There is sense of volume.

    01 Aug 2016
    5.0
    I installed it in 2014 ninja 1000. Purchase will be a local shop. Installation was almost non-processing. Because the Screw hole on the front does not fit a bit, Screw hole processing was done. Impression after installation was Big Li's sense of volume. Although it is Under Cowl using Carbon, things of other companies (It is not Under Cowl) In comparison with the above, because the gloss is not enough, I made the texture -1. Oil exchange seems a bit painful, but I am satisfied because Parenthesis is good. ดูรายละเอียด
    ฉันติดตั้งมันในปี 2014 ninja 1000 การซื้อจะเป็นร้านค้าในพื้นที่ การติดตั้งเกือบจะไม่ประมวลผล เนื่องจากรูสกรูที่ด้านหน้าไม่พอดีเลย การประมวลผลรูสกรูจึงเสร็จสิ้น ความประทับใจหลังการติดตั้งคือความรู้สึกของ Big Li ถึงแม้ว่าจะเป็น Under Cowl โดยใช้ Carbon แต่ของของบริษัทอื่น (It is not Under Cowl) เมื่อเทียบกับข้างต้น เนื่องจากความเงาไม่เพียงพอ ผมจึงทำพื้นผิว -1 การแลกเปลี่ยนน้ำมันดูเหมือนจะเจ็บปวดเล็กน้อย แต่ฉันพอใจเพราะวงเล็บนั้นดี ดูรายละเอียด
    แสดงที่มา

    The HORNET250 was equipped! I think that the
    wearing itself can be performed in about 1 hour.
    form and structure are also solid and it is satisfactory.I think that an oil change is impossible unless it removes each time at the time of an oil change

    31 Jul 2013
    5.0
    The HORNET250 was equipped! I think that the
    wearing itself can be performed in about 1 hour.
    form and structure are also solid and it is satisfactory.I think that an oil change is impossible unless it removes each time at the time of an oil change
    , however as it expected. -- although it is a personal opinion again -- a description -- a solution loan -- having been hard .
    ดูรายละเอียด
    HORNET250 ถูกติดตั้ง! ฉันคิดว่า
    การสวมใส่ตัวเองสามารถทำได้ภายในเวลาประมาณ 1 ชั่วโมง
    รูปทรงและโครงสร้างยังแข็งแรงและน่าพอใจ ฉันคิดว่าการเปลี่ยนถ่ายน้ำมันเครื่องเป็นไปไม่ได้ เว้นแต่จะถอดออกทุกครั้งที่เปลี่ยนถ่ายน้ำมันเครื่อง
    แต่ก็เป็นไปตามคาด แม้ว่าจะเป็นความเห็นส่วนตัวอีกครั้ง คำอธิบาย -- เงินกู้เพื่อการแก้ปัญหา -- ที่เคยเป็นเรื่องยาก
    ดูรายละเอียด
    แสดงที่มา

    สินค้าที่ดูก่อนหน้า

    มีสินค้าในสต๊อกพร้อมจัดส่ง

    สินค้าแนะนำ

    สินค้าที่เกี่ยวข้อง

    สินค้าแนะนำ

    สินค้าที่ดูล่าสุด

    New Custom Article

    ดูทั้งหมด