หน้าแรก

【DAYTONA】ไฟ LED ติดป้ายทะเบียนทรงเหลี่ยม

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿1,409
คะแนนวีไบค์: 14

ตรงรุ่น:

Universal

ดูเพิ่มเติม

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

สำหรับ DC12V

[รายละเอียดสินค้า]

เพื่อการมองเห็นที่ดีขึ้นแต่งแสง!
ไฟส่องป้ายทะเบียนเอนกประสงค์
ใช้ร่วมกับไฟท้ายและไฟประเภทอื่น ๆ ที่ไม่มีไฟส่องป้ายทะเบียน ..
โคมไฟใบอนุญาตธรรมดา (63278) ได้รับการออกแบบใหม่เพื่อให้มีมุมส่องสว่างที่กว้างขึ้น. การเข้าพักยังเปลี่ยนเป็นตำแหน่งที่ให้แสงสว่างทั้งจำนวนเท่า ๆ กัน ..

ตรงรุ่น

    • Universal

รีวิวสินค้า

    【What made you decide the purchase?】
    OEM Rear Fender's shape was dissatisfied, so after processing it became impossible to install OEM License Lamp, purchased this time and bought Number mounted Bolt for purchase.
    Moreover, I was able to purchase with confidence by saying.

    【How was it actually used?】
    Rear Fender is really Slant in my car, so I thought that the light source could be seen from behind and the vehicle inspection did not go through unless the LED part was bent by hand when installing.
    Also, since Number was attached to the Stop-lamp bottom surface Limit, when this product was attached to the car body, the LED lamp was covered on the Stop-lamp, and we abandoned the installation.
    In addition, if I bent the LED part attached to my vehicle from the Rear until the light source became invisible, I could only illuminate Number top.

    【Was it difficult to install? (Hard parts case)】
    Although it is easy to install, it is impossible to install it like me if you do not position the Number after calculating the Clearance of Number and Stop-lamp before installation.
    Also, the Fender part (Number) Is too slant, you can install but the light source will be visible from behind.

    【Please tell me the point of installation and hang (in the case of Hard parts)】
    I think that the way to install so as not to fail like me is to do firmly Number mounting positions on the foundation.

    [Is there anything I was disappointed about?]
    There is none. I could not install it due to my own mistake.

    【Hope for Manufacturer - Please let me know if you have any improvement points]
    There is none.

    【Have you compared items?】
    There will.

    【What made you decide the purchase?】
    OEM Rear Fender's shape was dissatisfied, so after processing it became impossible to install OEM License Lamp, purchased this time and bought Number mounted Bolt for purchase.
    Moreover, I was able to purchase with confidence by saying.

    【How was it actually used?】
    Rear Fender is really Slant in my car, so I thought that the light source could be seen from behind and the vehicle inspection did not go through unless the LED part was bent by hand when installing.
    Also, since Number was attached to the Stop-lamp bottom surface Limit, when this product was attached to the car body, the LED lamp was covered on the Stop-lamp, and we abandoned the installation.
    In addition, if I bent the LED part attached to my vehicle from the Rear until the light source became invisible, I could only illuminate Number top.

    【Was it difficult to install? (Hard parts case)】
    Although it is easy to install, it is impossible to install it like me if you do not position the Number after calculating the Clearance of Number and Stop-lamp before installation.
    Also, the Fender part (Number) Is too slant, you can install but the light source will be visible from behind.

    【Please tell me the point of installation and hang (in the case of Hard parts)】
    I think that the way to install so as not to fail like me is to do firmly Number mounting positions on the foundation.

    [Is there anything I was disappointed about?]
    There is none. I could not install it due to my own mistake.

    【Hope for Manufacturer - Please let me know if you have any improvement points]
    There is none.

    【Have you compared items?】
    There will.

    【What made you decide the purchase?】 Required item
    I was looking for License Plate Light and I was looking for a small one.
    Also, since the light irradiation width of the LED was a wide angle type, purchase.

    【How was it actually used?】 Required item
    Rear Fender is quite diagonal on my car body, so when I installed it, apparently I could see the light source and decided that I could not clear the car inspection.
    However, since the light emitting part can be bent to some extent by hand, you can adjust the angle.

    【Was it difficult to install? (Hard parts case)】 Any item
    Installation on the car body is only to interrupt the License Plate Bolt, but we are using LEDs and we have to wire with the car body.

    【Please tell me the point of installation and hang (in the case of Hard parts)】 Any item
    Wiring please go definitely.
    If you bend with too much hands, because it is a thin iron plate it will cause Gold genus fatigue and break.

    [Is there anything I was disappointed about?] Required item
    It was that I could not conform to my body.
    There is no problem with the product.

    【Hope for Manufacturer - Please let me know if there are any improvement points] Required item
    It is a type that pastes the LED to Bracket, but I think that it will peel off someday. Is it better to change to Bolt Tightening Type for Bracket?

    【Have you compared items?】
    There will. It is another part of DAYTONA

    【What made you decide the purchase?】 Required item
    I was looking for License Plate Light and I was looking for a small one.
    Also, since the light irradiation width of the LED was a wide angle type, purchase.

    【How was it actually used?】 Required item
    Rear Fender is quite diagonal on my car body, so when I installed it, apparently I could see the light source and decided that I could not clear the car inspection.
    However, since the light emitting part can be bent to some extent by hand, you can adjust the angle.

    【Was it difficult to install? (Hard parts case)】 Any item
    Installation on the car body is only to interrupt the License Plate Bolt, but we are using LEDs and we have to wire with the car body.

    【Please tell me the point of installation and hang (in the case of Hard parts)】 Any item
    Wiring please go definitely.
    If you bend with too much hands, because it is a thin iron plate it will cause Gold genus fatigue and break.

    [Is there anything I was disappointed about?] Required item
    It was that I could not conform to my body.
    There is no problem with the product.

    【Hope for Manufacturer - Please let me know if there are any improvement points] Required item
    It is a type that pastes the LED to Bracket, but I think that it will peel off someday. Is it better to change to Bolt Tightening Type for Bracket?

    【Have you compared items?】
    There will. It is another part of DAYTONA

    I tried purchasing it because it is the latest version of DAYTONA's License Plate Light.
    It is used in conjunction with my own License Plate Bracket because it is more diffused light than the conventional LED.
    With things can be installed with confidence.

    Bracket is probably Aluminum, so I am worried about the strength against rough vibration on rough roads.

    I tried purchasing it because it is the latest version of DAYTONA's License Plate Light.
    It is used in conjunction with my own License Plate Bracket because it is more diffused light than the conventional LED.
    With things can be installed with confidence.

    Bracket is probably Aluminum, so I am worried about the strength against rough vibration on rough roads.

สินค้าที่มีผู้เข้าชมมากที่สุด

【Rin Parts】LED License Plate Light Ver.C
ไฟส่องป้ายทะเบียน Rin Parts ZOOMER (Ruckus, NPS50)
【From Neighbor】LED License Plate Lamp Unit
ไฟท้าย LED From Neighbor BANDIT650 (GSF650)
【MADMAX】LED Number Light License Lamp LED14
ชุดไฟ LED MADMAX