หน้าแรก

【ZETA】Pilot Lever Clutch

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿3,222
คะแนนวีไบค์: 32

ตรงรุ่น:

Z1000 (water-cooled) 04-14

Z750 (water-cooled) 07-08

ZX-12R 00-07

ดูเพิ่มเติม

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

สี : สีไทเทเนียมโนไดซ์
วัสดุ : อลูมิเนียมปลอม
ประเภทคันโยก : L3WA

[คำอธิบาย]

[คำเตือน]

* ภาพนี้ใช้สำหรับอ้างอิงเท่านั้น. รูปภาพที่แสดงอาจแตกต่างจากผลิตภัณฑ์จริง

[รายละเอียดสินค้า]

นอกจากนี้ยังแสดงความคิดเห็นเกี่ยวกับความรู้เกี่ยวกับคันบังคับสำหรับยานพาหนะทั่วไป
มันล้มลงขึ้นและลงและลดการแตกหักเนื่องจากการตก
มีรูระบายอากาศขนาดใหญ่ที่ส่วนปลายและไม่มีแรงดันลมแม้จะใช้ความเร็วสูงมากก็ตาม
เป็นระบบปรับที่สามารถปรับตำแหน่งคันโยกแบบละเอียดได้ (ประมาณ 20 ขั้นตอน).
ใช้คันโยกแบบสั้นซึ่งเหมาะสมที่สุดสำหรับการใช้งานคันโยกแบบละเอียดในระหว่างการขี่แบบสปอร์ต
ใช้วัสดุโลหะผสมอลูมิเนียมที่มีความแข็งแรงสูงและใช้การเคลือบผิวด้วยอโนไดซ์

ตรงรุ่น

รีวิวสินค้า

    Since the diameter of the mounting Bolt of the Clutch lever is different in 17 years old and beyond
    Can not be installed (The 17 year type has a narrower diameter)

    I pressed in Color and forcibly attached it, but I had a hard time

    I bought for the use feeling like Lever for Off car made by the company
    I am not as comfortable as I used to.

    The Adjuster mechanism is tight, so fine tuning does not work

    It is expensive unnecessarily and I am disappointed as it was my favorite Brand

    Reason for purchase
    OEM's Clutch lever has a notch to soften the Shock at the time of falling and it will break from there when standing up..
    Oh, I got stood up I was getting stuck. ( ・_・;)
    Because the price is also close to 4,000 yen, we will try to make it to the Other Company Product.
    If I had to make fine adjustments on the hand grips, I thought that design, finish is good ~ I thought that this product was encountered.

    good point
    - Fine adjustment of the maximum Large 20 stage is possible
    - Lever collapses in the up and down direction and forward direction to suppress the Damage of Lever at the time of falling to the Smallest limit
    - Buildings such as Lever, Dial and others that seem to be high in processing technology

    A bad point
    - Price close to 10,000 yen

    ■ Mounting
    Since the installation is only for replacement, no hang is difficult.
    However, when Lever was adjusted to the nearest position, it seems that Clutch can not cut enough at V-Strom, so Cell did not turn at start.
    There is no problem because it can be solved by adjusting 2 to 3 Click distant positions..

    ■ Feeling of use
    Although Lever's position adjustment only fights at first, although it does not almost tinkle at the rest, a satisfying operation feeling.
    There is a feeling of satisfaction just by watching the design with LET ZETA and engraved with good design.
    I am wearing the Knuckle guard, so I do not feel self-satisfied ,,,.
    Lever is a Short eye so it's a little Race ish atmosphere and it's easy to use.
    I think that it is an elegant design with a good Earle, but when I hook my fingers, I feel an externally angled feel.
    It is not as painful, but I like it a bit more rugged and soft feel.

    I think that it is a highly satisfactory product except for the high price.

    Reason for purchase
    OEM's Clutch lever has a notch to soften the Shock at the time of falling and it will break from there when standing up..
    Oh, I got stood up I was getting stuck. ( ・_・;)
    Because the price is also close to 4,000 yen, we will try to make it to the Other Company Product.
    If I had to make fine adjustments on the hand grips, I thought that design, finish is good ~ I thought that this product was encountered.

    good point
    - Fine adjustment of the maximum Large 20 stage is possible
    - Lever collapses in the up and down direction and forward direction to suppress the Damage of Lever at the time of falling to the Smallest limit
    - Buildings such as Lever, Dial and others that seem to be high in processing technology

    A bad point
    - Price close to 10,000 yen

    ■ Mounting
    Since the installation is only for replacement, no hang is difficult.
    However, when Lever was adjusted to the nearest position, it seems that Clutch can not cut enough at V-Strom, so Cell did not turn at start.
    There is no problem because it can be solved by adjusting 2 to 3 Click distant positions..

    ■ Feeling of use
    Although Lever's position adjustment only fights at first, although it does not almost tinkle at the rest, a satisfying operation feeling.
    There is a feeling of satisfaction just by watching the design with LET ZETA and engraved with good design.
    I am wearing the Knuckle guard, so I do not feel self-satisfied ,,,.
    Lever is a Short eye so it's a little Race ish atmosphere and it's easy to use.
    I think that it is an elegant design with a good Earle, but when I hook my fingers, I feel an externally angled feel.
    It is not as painful, but I like it a bit more rugged and soft feel.

    I think that it is a highly satisfactory product except for the high price.

    그동안 중국산 레버를 사용했었는데 너무 질이 떨어지더라구요 큰맘먹고 고민고민 끝에 지인들의 추천으로 제타레버 선택하였는데 정말 좋아요 위바이크에서 구매한지 얼마되지는 않았지만 구매하는 것마다 정말 만족스럽네요 일체감있게 유격없고 가볍고 튼튼해보이면서도 제 바이크가 한층더 멋있어진것 같네요 자주 애용하겠습니다.

    그동안 중국산 레버를 사용했었는데 너무 질이 떨어지더라구요 큰맘먹고 고민고민 끝에 지인들의 추천으로 제타레버 선택하였는데 정말 좋아요 위바이크에서 구매한지 얼마되지는 않았지만 구매하는 것마다 정말 만족스럽네요 일체감있게 유격없고 가볍고 튼튼해보이면서도 제 바이크가 한층더 멋있어진것 같네요 자주 애용하겠습니다.

    The Brake side is satisfied and it looks good and texture is also good, but Clutch is close even if I can not wire any more. Gold's Knob is also full so I am compromising. Then Gold's Knob may be a little cheap

สินค้าที่มีผู้เข้าชมมากที่สุด