- หน้าแรก
- เครื่องมือ
- เครื่องมือช่าง
- คีมตัดแนวขวาง
- KNIPEX
- KNIPEX: คีมหนีบ 1000V (SB)
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
ความสามารถในการตัด (สายอ่อนΦmm) : > 4.0ความสามารถในการตัด (ลวดแข็งΦmm) : 3.8
ความสามารถในการตัด (ลวดแข็งΦmm) : 2.7
ความสามารถในการตัด (สายเปียโนΦmm) : 2.2
การตกแต่งหัว : การชุบโครเมียม
จัดการ Spec : ฉนวน 1000V (ผ่านการทดสอบฉนวน VDE แล้ว)
ความยาว (mm) : 180
น้ำหนัก (ก.) : 260
Cutting Capacity (Soft Wire; Φmm): >4.0
Cutting Capacity (Medium-Hard Wire; Φmm): 3.8
Cutting capacity (hard wire; Φmm): 2.7
Cutting capacity (piano wire; Φmm): 2.2
Head Finish: Chrome plated
Handle Specifications: 1000V Isolation (VDE Isolation Tested)
Length (mm): 180
Weight (g): 260
รายละเอียดคำถาม
ข้อต่อทำจากฟอร์จเพลากาวเพื่อความทนทานที่ดีเยี่ยม. เหมาะสำหรับตัดสายไฟต่างๆรวมทั้งสายเปียโน. ตำแหน่งและมุมใบมีดที่เหมาะสมการออกแบบแรงงัดสูงสุดและรูปทรงที่จับตามหลักสรีรศาสตร์ข้อดีสามประการของเครื่องนี้ทำให้สามารถตัดได้สูงโดยใช้แรงเพียงเล็กน้อย. ความแข็งของใบมีดซึ่งผ่านการชุบแข็งอย่างระมัดระวังอยู่ที่ประมาณ HRC64. วัสดุ: เหล็กไฟฟ้าโครเมี่ยมวานาเดียมชุบน้ำมันและชุบแข็ง. มือจับหุ้มฉนวน 1000 V
ด้ามจับหุ้มฉนวน 1000V ทำจากวัสดุสองชนิดที่แตกต่างกันและแตกต่างจากเครื่องมือที่ไม่มีฉนวนด้วยโทนสีทูโทนสีแดงและสีเหลือง ..
ข้อต่อทำจากฟอร์จเพลายิงกาวเพื่อความทนทานที่ยอดเยี่ยม ..
เหมาะสำหรับตัดสายไฟต่างๆรวมทั้งสายเปียโน
ตำแหน่งและมุมใบมีดที่เหมาะสมการออกแบบแรงงัดสูงสุดและรูปทรงที่จับตามหลักสรีรศาสตร์ข้อดีสามประการของเครื่องนี้ทำให้สามารถตัดได้สูงโดยใช้แรงเพียงเล็กน้อย ..
ความแข็งของใบมีดซึ่งผ่านการชุบแข็งอย่างระมัดระวังอยู่ที่ประมาณ HRC64
ก้ามปูทแยงมุมยาว 250 มม. สามารถตัดลวดทองแดงได้สูงสุด 16 มม. 2 และลวดอลูมิเนียมได้ถึง 35 มม.
วัสดุ: เหล็กไฟฟ้าโครเมี่ยมวานาเดียมชุบน้ำมันและชุบแข็ง
การเลือกใช้วัสดุ (เหล็กโครเมี่ยมวานาเดียม) การออกแบบที่เพิ่มหลักการนี้ให้สูงสุดและตำแหน่งและมุมของใบมีดที่เหมาะสมพร้อมกับคุณสมบัติที่โดดเด่นเหล่านี้ทำให้ก้ามปูแบบทแยงมุมสำหรับงานหนัก KNIPEX เหมาะอย่างยิ่งสำหรับการตัดสายไฟที่แข็ง. ใช้สำหรับชิ้นส่วนรอยต่อและสามารถทำงานได้อย่างมั่นใจแม้ในสถานการณ์ที่มีการบรรทุกหนัก ..
โหลดน้อยลง 21%: ก้ามทแยงมุมมาตรฐาน (160mm) ต้องการ 370 N (37.0kp) เพื่อตัดลวดแข็งปานกลางเส้นผ่านศูนย์กลาง 2.5 มม. ในขณะที่ก้ามทแยงมุมที่แข็งแรง (160mm) ต้องการเพียง 293 N (29.3kp) ที่จะตัด.. The joint is made of forged shaft caulking for superior durability.Suitable for cutting a variety of wires including piano wire.The optimal blade position and angle, the design that maximizes the leverage principle, and the ergonomic shape of the handle - these three advantages allow for high cutting performance with low effort.The hardness of the blade, which has undergone careful quenching treatment, is approximately HRC64.5.Material is oil quenched and tempered chrome vanadium electrical steel.Handle is 1000V insulated.
The 1000V insulated handle is made of two different materials and has a two-tone red and yellow color to differentiate it from non-insulated tools.
The joint is made of forged shaft caulking for superior durability.
Suitable for cutting a variety of wires including piano wire.
The optimal blade position and angle, the design that maximizes the leverage principle, and the ergonomic shape of the handle - these three advantages allow for high cutting performance with low effort.
The hardness of the blade, which has undergone careful quenching treatment, is approximately HRC64.5.
The 250mm long type diagonal cutter can cut copper wire up to 16mm2 and aluminum wire up to 35mm.
Material is oil quenched and tempered chrome vanadium electrical steel
The selection of the most suitable material (chrome vanadium steel), the design that maximizes the use of the leverage principle, the optimal blade position and angle, and the combination of these outstanding features make the KNIPEX powerful diagonal cutter particularly suitable for cutting hard wire.In addition, forged shaft caulking is adopted for the joint part, and it is possible to work at ease even in the situation where a high load is applied.
Reduced burden by 21%: When cutting medium-hard wire with a diameter of 2.5mm, a general diagonal cutter (160mm) requires a force of 370 N (37.0 kp), while a powerful diagonal cutter (same size) can cut with a force of only 293 N (29.3 kp).
ด้ามจับหุ้มฉนวน 1000V ทำจากวัสดุสองชนิดที่แตกต่างกันและแตกต่างจากเครื่องมือที่ไม่มีฉนวนด้วยโทนสีทูโทนสีแดงและสีเหลือง ..
ข้อต่อทำจากฟอร์จเพลายิงกาวเพื่อความทนทานที่ยอดเยี่ยม ..
เหมาะสำหรับตัดสายไฟต่างๆรวมทั้งสายเปียโน
ตำแหน่งและมุมใบมีดที่เหมาะสมการออกแบบแรงงัดสูงสุดและรูปทรงที่จับตามหลักสรีรศาสตร์ข้อดีสามประการของเครื่องนี้ทำให้สามารถตัดได้สูงโดยใช้แรงเพียงเล็กน้อย ..
ความแข็งของใบมีดซึ่งผ่านการชุบแข็งอย่างระมัดระวังอยู่ที่ประมาณ HRC64
ก้ามปูทแยงมุมยาว 250 มม. สามารถตัดลวดทองแดงได้สูงสุด 16 มม. 2 และลวดอลูมิเนียมได้ถึง 35 มม.
วัสดุ: เหล็กไฟฟ้าโครเมี่ยมวานาเดียมชุบน้ำมันและชุบแข็ง
การเลือกใช้วัสดุ (เหล็กโครเมี่ยมวานาเดียม) การออกแบบที่เพิ่มหลักการนี้ให้สูงสุดและตำแหน่งและมุมของใบมีดที่เหมาะสมพร้อมกับคุณสมบัติที่โดดเด่นเหล่านี้ทำให้ก้ามปูแบบทแยงมุมสำหรับงานหนัก KNIPEX เหมาะอย่างยิ่งสำหรับการตัดสายไฟที่แข็ง. ใช้สำหรับชิ้นส่วนรอยต่อและสามารถทำงานได้อย่างมั่นใจแม้ในสถานการณ์ที่มีการบรรทุกหนัก ..
โหลดน้อยลง 21%: ก้ามทแยงมุมมาตรฐาน (160mm) ต้องการ 370 N (37.0kp) เพื่อตัดลวดแข็งปานกลางเส้นผ่านศูนย์กลาง 2.5 มม. ในขณะที่ก้ามทแยงมุมที่แข็งแรง (160mm) ต้องการเพียง 293 N (29.3kp) ที่จะตัด.. The joint is made of forged shaft caulking for superior durability.Suitable for cutting a variety of wires including piano wire.The optimal blade position and angle, the design that maximizes the leverage principle, and the ergonomic shape of the handle - these three advantages allow for high cutting performance with low effort.The hardness of the blade, which has undergone careful quenching treatment, is approximately HRC64.5.Material is oil quenched and tempered chrome vanadium electrical steel.Handle is 1000V insulated.
The 1000V insulated handle is made of two different materials and has a two-tone red and yellow color to differentiate it from non-insulated tools.
The joint is made of forged shaft caulking for superior durability.
Suitable for cutting a variety of wires including piano wire.
The optimal blade position and angle, the design that maximizes the leverage principle, and the ergonomic shape of the handle - these three advantages allow for high cutting performance with low effort.
The hardness of the blade, which has undergone careful quenching treatment, is approximately HRC64.5.
The 250mm long type diagonal cutter can cut copper wire up to 16mm2 and aluminum wire up to 35mm.
Material is oil quenched and tempered chrome vanadium electrical steel
The selection of the most suitable material (chrome vanadium steel), the design that maximizes the use of the leverage principle, the optimal blade position and angle, and the combination of these outstanding features make the KNIPEX powerful diagonal cutter particularly suitable for cutting hard wire.In addition, forged shaft caulking is adopted for the joint part, and it is possible to work at ease even in the situation where a high load is applied.
Reduced burden by 21%: When cutting medium-hard wire with a diameter of 2.5mm, a general diagonal cutter (160mm) requires a force of 370 N (37.0 kp), while a powerful diagonal cutter (same size) can cut with a force of only 293 N (29.3 kp).
ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/