- หน้าแรก
- เครื่องมือ
- เครื่องมือช่าง
- คีม
- คีม
- KNIPEX
- KNIPEX: คีมปอกสายไฟ for End Sleeve (SB)
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
ความสามารถในการจีบ (mm2) : 0.5, 0.75-1.0, 1.5, 2.5, 4.0, 6.0, 10.0, 16.0ความสามารถในการจีบ (AWG) : 20, 18-17, 15, 13, 11, 10, 7, 5
ขั้วที่เกี่ยวข้อง : ปลายแขน
การตกแต่งหัว : ขัด
ข้อมูลจำเพาะของ Handlebar : เคลือบพลาสติก
ความยาว (mm) : 180
น้ำหนัก (ก.) : 265
Crimping Capacity (mm2): 0.5, 0.75-1.0, 1.5, 2.5, 4.0, 6.0, 10.0, 16.0
Crimping Capacity (AWG): 20, 18-17, 15, 13, 11, 10, 7, 5
Supported Terminals: End Sleeve
Head Finish: Polish
Handle Specifications: Plastic Coating
Length (mm): 180
Weight (g): 265
รายละเอียดคำถาม
สำหรับการจีบปลอกปลายไม่เกิน 0.5-16 มม. 2 ตามมาตรฐาน DIN 46228 วรรค 1 และ 4. จีบแขนเสื้อและตัวนำที่บริเวณการจีบสี่เหลี่ยมคางหมูโดยมีขนาดตรงกับขนาดของคำแนะนำในการจีบ. ส่วนการจีบสอดคล้องกับแปดขนาด. วัสดุ: เหล็กกล้าเครื่องมือพิเศษชุบแข็งและชุบน้ำมัน
สำหรับการจีบปลอกปลายไม่เกิน 0.5-16 มม. 2 ตามมาตรฐาน DIN 46228 วรรค 1 และ 4
จีบปลอกและตัวนำที่บริเวณการจีบสี่เหลี่ยมคางหมูโดยมีขนาดตรงกับขนาดของคำแนะนำในการจีบ ..
ส่วนการจีบสอดคล้องกับแปดขนาด
วัสดุ: เหล็กกล้าเครื่องมือพิเศษชุบแข็งและชุบน้ำมัน
ขั้วที่เข้ากันได้: ปลอกปลาย For crimping of end sleeves up to 0.5-16mm2 in accordance with DIN 46228 Clause 1 and Clause 4.Crimp the sleeve and the conductor at the trapezoidal crimping area according to the size indicated.The crimping part corresponds to 8 sizes.Material is oil quenched and tempered special tool steel.
For crimping of end sleeves up to 0.5-16mm2 in accordance with DIN 46228 Clause 1 and Clause 4.
Crimp the sleeve and the conductor at the trapezoidal crimping area according to the size indicated.
The crimping part corresponds to 8 sizes.
Material is oil quenched and tempered special tool steel.
Supported Terminals: End Sleeve
สำหรับการจีบปลอกปลายไม่เกิน 0.5-16 มม. 2 ตามมาตรฐาน DIN 46228 วรรค 1 และ 4
จีบปลอกและตัวนำที่บริเวณการจีบสี่เหลี่ยมคางหมูโดยมีขนาดตรงกับขนาดของคำแนะนำในการจีบ ..
ส่วนการจีบสอดคล้องกับแปดขนาด
วัสดุ: เหล็กกล้าเครื่องมือพิเศษชุบแข็งและชุบน้ำมัน
ขั้วที่เข้ากันได้: ปลอกปลาย For crimping of end sleeves up to 0.5-16mm2 in accordance with DIN 46228 Clause 1 and Clause 4.Crimp the sleeve and the conductor at the trapezoidal crimping area according to the size indicated.The crimping part corresponds to 8 sizes.Material is oil quenched and tempered special tool steel.
For crimping of end sleeves up to 0.5-16mm2 in accordance with DIN 46228 Clause 1 and Clause 4.
Crimp the sleeve and the conductor at the trapezoidal crimping area according to the size indicated.
The crimping part corresponds to 8 sizes.
Material is oil quenched and tempered special tool steel.
Supported Terminals: End Sleeve
ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/