- หน้าแรก
- เครื่องมือ
- เครื่องมือช่าง
- คีม
- คลิปคีม
- KNIPEX
- KNIPEX: คีมปากจิ้งจก สำหรับ Hole Bent (SB)
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
การตกแต่งหัว : ขัดจัดการ Spec : เคลือบพลาสติก
สไตล์ : ปลายงอ 90 องศา
ความยาว (mm) : 170
น้ำหนัก (ก.) : 140
ช่วงการใช้งาน (เส้นผ่านศูนย์กลางภายในΦmm) : 19-60
เคล็ดลับเส้นผ่าศูนย์กลางเพลา (mm) : 2.0
Head Finish: Polish
Handle Specifications: Plastic Coating
Style: 90 Degree Pivot
Length (mm): 170
Weight (g): 140
Operating range (I.D. Φmm):19-60
Shaft Diameter of Tip (mm): 2.0
รายละเอียดคำถาม
การปลอมแหวนล็อกสำหรับการติดตั้งและการถอดรูขนาดเส้นผ่านศูนย์กลาง 19-60 มม. มันแข็งแกร่งกว่ามาก. วัสดุปลายกันลื่นคือเหล็กโครเมี่ยมวานาเดียมชุบน้ำมันและชุบแข็ง. ติดตั้งและถอดแหวนล็อกสำหรับรูได้ง่าย. อย่าลืมสวมแว่นตานิรภัยเมื่อใช้คีมแหวนล็อก. หากแหวนล็อกติดให้ขยับแหวนเล็กน้อยเพื่อให้ถอดออกได้ง่ายขึ้น. ใช้คีมปากแหลมที่มีขนาดตรงกับแหวน ..
สำหรับการติดตั้งและการถอดแหวนล็อกสำหรับรูที่มีเส้นผ่านศูนย์กลาง 19-60 มม
ทนทานมากเนื่องจากการปลอม
ปลายไม่ลื่น
วัสดุ: เหล็กวานาเดียมโครเมี่ยมชุบน้ำมันและชุบแข็ง
ติดตั้งและถอดแหวนล็อกสำหรับรูได้ง่าย For forging the installation and removal of snap rings for holes with diameters from 19-60mm.It is much sturdier.Non-slip tip material is oil hardened and tempered chrome vanadium steel.Easy to install and remove the snap ring for the hole.Always wear safety goggles when working with snap ring pliers.If the snap ring is stuck, move the ring a little to make it easier to remove before working on it.Use the correct snap ring pliers for the size of the ring.
For mounting and dismounting of snap rings for holes with diameters from 19-60mm
The forging process makes it very robust.
Non-slip tip
Material is oil quenched and tempered chrome vanadium steel
Easy to install and remove the snap ring for the hole.
สำหรับการติดตั้งและการถอดแหวนล็อกสำหรับรูที่มีเส้นผ่านศูนย์กลาง 19-60 มม
ทนทานมากเนื่องจากการปลอม
ปลายไม่ลื่น
วัสดุ: เหล็กวานาเดียมโครเมี่ยมชุบน้ำมันและชุบแข็ง
ติดตั้งและถอดแหวนล็อกสำหรับรูได้ง่าย For forging the installation and removal of snap rings for holes with diameters from 19-60mm.It is much sturdier.Non-slip tip material is oil hardened and tempered chrome vanadium steel.Easy to install and remove the snap ring for the hole.Always wear safety goggles when working with snap ring pliers.If the snap ring is stuck, move the ring a little to make it easier to remove before working on it.Use the correct snap ring pliers for the size of the ring.
For mounting and dismounting of snap rings for holes with diameters from 19-60mm
The forging process makes it very robust.
Non-slip tip
Material is oil quenched and tempered chrome vanadium steel
Easy to install and remove the snap ring for the hole.
คำเตือน
* โปรดตรวจสอบให้แน่ใจว่าได้สวมแว่นตานิรภัยเมื่อใช้คีมแหวนล็อก* กรุณาขยับแหวนเล็กน้อยและถอดออกได้ง่ายในกรณีที่แหวนล็อกติดอยู่
* โปรดใช้คีมปากแหลมที่สอดคล้องกับขนาดของแหวน *Always wear safety goggles when working with snap ring pliers.
*If the snap ring is stuck, move the ring a little to make it easier to remove before working on it.
*Use the correct size snap ring pliers for the size of the ring.
*There may be changes in product specifications due to the manufacturer's reasons.
ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/