- หน้าแรก
- เครื่องมือ
- เครื่องมือเดินสายไฟฟ้า
- คีมปลอกสายไฟ
- KNIPEX
- KNIPEX: คีมปลอกสายไฟ (SB)
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
ความสามารถในการปอก (mm2) : 0.03-10.0ความสามารถในการปอก (AWG) : 32-7
ช่วงการปรับความยาวของการปอก (mm) : 3.0-18.0
ความยาว (mm) : 200
น้ำหนัก (ก.) : 200
Stripping Capacity (mm2): 0.03-10.0
Stripping Capacity (AWG): 32-7
Stripping Length Adjustment Range (mm): 3.0-18.0
Length (mm): 200
Weight (g): 200
รายละเอียดคำถาม
สำหรับการปอกสายเดี่ยวลวดผสมลวดตีเกลียวและวัสดุเคลือบยาง. ปรับความลึกของการตัดโดยอัตโนมัติเพื่อให้ตรงกับความหนาของสายเคเบิลเพื่อไม่ให้ตัวนำเสียหาย. ความลึกของรอยบากสามารถปรับได้ตามการเคลือบ. มีเครื่องตัดลวดที่สามารถตัดสายทองแดงและอลูมิเนียม. สูงสุด 10mm2 ในกรณีของสายคอมโพสิตและสูงสุด 6mm2 ในกรณีของสายเดี่ยว. ขากรรไกรพร้อมจุกคางแบบปรับได้. หมายเลขชิ้นส่วนใบมีด: 1249-01 หมายเลขชิ้นส่วนขากรรไกร: 1249-02 หมายเลขชิ้นส่วนจุกปรับความยาว: 1249-03
สำหรับปอกสายเดี่ยวลวดผสมลวดตีเกลียวและเคลือบวัสดุยาง ..
ปรับความลึกของการตัดโดยอัตโนมัติให้ตรงกับความหนาของสายเคเบิลเพื่อไม่ให้ตัวนำเสียหาย ..
ความลึกของรอยบากสามารถปรับได้ตามการเคลือบ
มีเครื่องตัดลวดที่สามารถตัดสายทองแดงและอลูมิเนียม. สูงสุด 10mm2 ในกรณีของสายคอมโพสิตและสูงสุด 6mm2 ในกรณีของสายเดี่ยว
ทำงานราบรื่น ..
คางพลาสติกพร้อมจุกปรับได้. ใบมีดสำรองสามารถเปลี่ยนได้ง่าย
น้ำหนักเบาและใช้งานง่าย
ตัวเครื่องผลิตจากพลาสติกเสริมความแข็งแรง
ช่วงที่ใช้งานได้: 0.03-10.0 มม 2.
สำหรับสายริบบิ้นแบบบางที่มีความกว้างไม่เกิน 10 มม.
จุกปรับความยาวสามารถปรับได้ตั้งแต่ 3.0-18.0 มม.
หมายเลขชิ้นส่วนใบมีด: 1249-01 หมายเลขชิ้นส่วนขากรรไกร: 1249-02 หมายเลขชิ้นส่วนจุกปรับความยาว: 1249-03 For stripping of plastic or rubber coating on single, compound or stranded wires.The depth of the cut is automatically adjusted according to the thickness of the cable, so it will not damage the conductor.The depth of cut can be adjusted according to the coating.Equipped with wire cutter which can cut copper and aluminum wire.It is possible to cut up to 10mm2 in the case of composite wire and up to 6mm2 in the case of single wire.Jaws with length adjustment stopper.Replacement Blade Part Number: 1249-01, replacement jaw part number: 1249-02, Replacement Length Adjustment Stopper Part Number: 1249-03
For stripping of plastic or rubber coating on single, compound or stranded wires.
The depth of the cut is automatically adjusted according to the thickness of the cable, so it will not damage the conductor.
The depth of cut can be adjusted according to the coating.
Equipped with wire cutter which can cut copper and aluminum wire.It is possible to cut up to 10mm2 in the case of composite wire and up to 6mm2 in the case of single wire.
It is designed for smooth operation.
Jaws made of plastic, with length adjustment stopper.The blade can be easily replaced.
Light weight and easy on the user.
Body made of reinforced plastic.
Scope of application: 0.03-10.0mm2.
For thin ribbon cables up to 10mm wide.
The length adjustment stopper can be adjusted in the range of 3.0-18.0mm.
Replacement Blade Part Number: 1249-01, replacement jaw part number: 1249-02, Replacement Length Adjustment Stopper Part Number: 1249-03
สำหรับปอกสายเดี่ยวลวดผสมลวดตีเกลียวและเคลือบวัสดุยาง ..
ปรับความลึกของการตัดโดยอัตโนมัติให้ตรงกับความหนาของสายเคเบิลเพื่อไม่ให้ตัวนำเสียหาย ..
ความลึกของรอยบากสามารถปรับได้ตามการเคลือบ
มีเครื่องตัดลวดที่สามารถตัดสายทองแดงและอลูมิเนียม. สูงสุด 10mm2 ในกรณีของสายคอมโพสิตและสูงสุด 6mm2 ในกรณีของสายเดี่ยว
ทำงานราบรื่น ..
คางพลาสติกพร้อมจุกปรับได้. ใบมีดสำรองสามารถเปลี่ยนได้ง่าย
น้ำหนักเบาและใช้งานง่าย
ตัวเครื่องผลิตจากพลาสติกเสริมความแข็งแรง
ช่วงที่ใช้งานได้: 0.03-10.0 มม 2.
สำหรับสายริบบิ้นแบบบางที่มีความกว้างไม่เกิน 10 มม.
จุกปรับความยาวสามารถปรับได้ตั้งแต่ 3.0-18.0 มม.
หมายเลขชิ้นส่วนใบมีด: 1249-01 หมายเลขชิ้นส่วนขากรรไกร: 1249-02 หมายเลขชิ้นส่วนจุกปรับความยาว: 1249-03 For stripping of plastic or rubber coating on single, compound or stranded wires.The depth of the cut is automatically adjusted according to the thickness of the cable, so it will not damage the conductor.The depth of cut can be adjusted according to the coating.Equipped with wire cutter which can cut copper and aluminum wire.It is possible to cut up to 10mm2 in the case of composite wire and up to 6mm2 in the case of single wire.Jaws with length adjustment stopper.Replacement Blade Part Number: 1249-01, replacement jaw part number: 1249-02, Replacement Length Adjustment Stopper Part Number: 1249-03
For stripping of plastic or rubber coating on single, compound or stranded wires.
The depth of the cut is automatically adjusted according to the thickness of the cable, so it will not damage the conductor.
The depth of cut can be adjusted according to the coating.
Equipped with wire cutter which can cut copper and aluminum wire.It is possible to cut up to 10mm2 in the case of composite wire and up to 6mm2 in the case of single wire.
It is designed for smooth operation.
Jaws made of plastic, with length adjustment stopper.The blade can be easily replaced.
Light weight and easy on the user.
Body made of reinforced plastic.
Scope of application: 0.03-10.0mm2.
For thin ribbon cables up to 10mm wide.
The length adjustment stopper can be adjusted in the range of 3.0-18.0mm.
Replacement Blade Part Number: 1249-01, replacement jaw part number: 1249-02, Replacement Length Adjustment Stopper Part Number: 1249-03
คำเตือน
*There may be changes in product specifications due to the manufacturer's reasons.*There may be changes in product specifications due to the manufacturer's reasons.
ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/