หน้าแรก

【DRC】ฮุคเกี่ยวสายจูง

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿558
ราคาเต็ม: ฿619 10% |
คะแนนวีไบค์: 6

    • รหัสสินค้า:
    • D36-11-221

ระบบกำลังคำนวณวันที่พร้อมจัดส่ง.....


ตรงรุ่น:

HIACE TOYOTA 100 series / 200 series

HIACE TOYOTA 100 series/200 series

ดูเพิ่มเติม

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

สี : เงิน
เส้นผ่านศูนย์กลางท่อ : สอดคล้องกับΦ21-Φ25.5
ปริมาณ : 1 ชิ้น.

[รายละเอียดสินค้า]

ติดตั้งโดยใช้ท่อนั่งของเบาะหลังที่พับได้ของตัวขนย้ายเช่น Hi Ace / Caravan
เป็นตะขอเกี่ยวที่แขวนไว้
สวมใส่ง่ายโดยไม่ต้องลำบากเพราะเป็นโครงสร้างที่ขันด้วยน็อต 2 ตัวเท่านั้น

[คำอธิบาย]

ตรงรุ่น

    • HIACE TOYOTA 100 series / 200 series
    • HIACE TOYOTA 100 series/200 series

รีวิวสินค้า

    Although I bought it for the E25 Caravan's Second seat, but Pipe was too thick to use it. Well, conformance is High ace and of course it is within expectation. I thought that if I changed Bolt to a long one I managed to use it somehow, but I fitted into a different hole perfectly, so I installed it there.
    As a result it is lucky!

    Although I bought it for the E25 Caravan's Second seat, but Pipe was too thick to use it. Well, conformance is High ace and of course it is within expectation. I thought that if I changed Bolt to a long one I managed to use it somehow, but I fitted into a different hole perfectly, so I installed it there.
    As a result it is lucky!

    【Deciding factor of purchase】
    ○ INAZUMA250 (GSR250) Where I was looking for items as preparation for attaching SurfBoard rack to "DRC Pipe clamp hook" I tried buying it so that I can divert it.
    ○ I was considering my own making, but 1pc. I think that it is cheaper than making 1,451 yen.

    【Description of item】
    ○ High ace - Caravan and other Transporter's folding type Rear seating seat Pipe was used to mount ←, but I wanted to specify clearly how much diameter Pipe can be fitted. I think that the bar of High ace was about 25 φ in outer diameter.
    ○ I think that you can Clim and Chitin up to the outer diameter 22φ ~ 30φ.

    ○ ClampHook for applying and Tie Down. ← This is M8 Eyebolt is installed.
    ○ If it is M8, you can remove the attached Eyebolt and tighten various things
    ○ BoltQuantity : Easy installation without troublesome work just by tightening with 2pc. ← This is Bolt with M6 hexagon socket. We use 5 mm hexagonal Wrench.

    [Material]
    ○ ClampBody : Aluminum Eyebolt : Iron tightening Bolt : Stainless

    【Actually using】
    ○ First of all painted in Black with aluminum can for Spray to match color. Aluminum is easy to peel off.
    ○ Engine Guard (28 φ) , Rear Carrier Frame (24 φ) To Quantity this product : 2pc. Fixed by Set at time.
    ○ I removed the attached Eyebolt and fixed the Board rackFrame with M8Stainless long eye bolt.
    ○ Pretty much Clamp sinking is solid, and there is no wobble even when putting about 5 kg of Surfboard + Board Case.
    * However, when clamping to RearSeat pipe which is the original usage of this product and fixing to Motorcycle it becomes uneasy at M8 Eyebolt.
    * BodyAluminum, Clamp fastening Screw is also M6 so if you try to fix it firmly with hi para etc. there is a possibility of rupture.

    ○ Since it can be fixed securely and firmly if it is a lightweight item, I think that it is useful Items depending on how you use CameraMount and Drink holder yourself etc.. As far as Engine Guard is concerned, the outer diameter that can be installed is not Exactly!

    【Deciding factor of purchase】
    ○ INAZUMA250 (GSR250) Where I was looking for items as preparation for attaching SurfBoard rack to "DRC Pipe clamp hook" I tried buying it so that I can divert it.
    ○ I was considering my own making, but 1pc. I think that it is cheaper than making 1,451 yen.

    【Description of item】
    ○ High ace - Caravan and other Transporter's folding type Rear seating seat Pipe was used to mount ←, but I wanted to specify clearly how much diameter Pipe can be fitted. I think that the bar of High ace was about 25 φ in outer diameter.
    ○ I think that you can Clim and Chitin up to the outer diameter 22φ ~ 30φ.

    ○ ClampHook for applying and Tie Down. ← This is M8 Eyebolt is installed.
    ○ If it is M8, you can remove the attached Eyebolt and tighten various things
    ○ BoltQuantity : Easy installation without troublesome work just by tightening with 2pc. ← This is Bolt with M6 hexagon socket. We use 5 mm hexagonal Wrench.

    [Material]
    ○ ClampBody : Aluminum Eyebolt : Iron tightening Bolt : Stainless

    【Actually using】
    ○ First of all painted in Black with aluminum can for Spray to match color. Aluminum is easy to peel off.
    ○ Engine Guard (28 φ) , Rear Carrier Frame (24 φ) To Quantity this product : 2pc. Fixed by Set at time.
    ○ I removed the attached Eyebolt and fixed the Board rackFrame with M8Stainless long eye bolt.
    ○ Pretty much Clamp sinking is solid, and there is no wobble even when putting about 5 kg of Surfboard + Board Case.
    * However, when clamping to RearSeat pipe which is the original usage of this product and fixing to Motorcycle it becomes uneasy at M8 Eyebolt.
    * BodyAluminum, Clamp fastening Screw is also M6 so if you try to fix it firmly with hi para etc. there is a possibility of rupture.

    ○ Since it can be fixed securely and firmly if it is a lightweight item, I think that it is useful Items depending on how you use CameraMount and Drink holder yourself etc.. As far as Engine Guard is concerned, the outer diameter that can be installed is not Exactly!

    Rigidity is [ high ] also so and necessaries at a transporter.

    Rigidity is [ high ] also so and necessaries at a transporter.

สินค้าที่มีผู้เข้าชมมากที่สุด

【OGUshow】ES Flat Tray
ES ถาดแบน OGUshow
【OGUshow】ES Privacy Curtain
ES Privacy Curtain OGUshow