หน้าแรก

【KIJIMA】แป้นยางคาร์บูเรเตอร์

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿1,074
คะแนนวีไบค์: 11

    • รหัสสินค้า:
    • K507-602

ระบบกำลังคำนวณวันที่พร้อมจัดส่ง.....


ตรงรุ่น:

APE 100

APE 50

ดูเพิ่มเติม

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

สอดคล้องกับ Pitch 58 PE28. (เส้นผ่านศูนย์กลาง 35 มม.)

[คำอธิบาย]


คลิกเพื่อดูแคตตาล็อก. P127:P221
* ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง

[คำเตือน]

* ภาพถ่ายของผลิตภัณฑ์มีผลิตภัณฑ์อื่น ๆ

[รายละเอียดสินค้า]

ใช้ NBR แบบพิเศษซึ่งสามารถกันรอยแตกทนความร้อนและทนต่อสภาพอากาศได้ดีเยี่ยม. เป็นผลิตภัณฑ์ที่มีการเปลี่ยนและใช้ร่วมกับฉนวนยางของชุดคาร์บูเรเตอร์ภายนอกและท่อร่วม

ตรงรุ่น

    • APE 100
    • APE 50

รีวิวสินค้า

    【What made you decide the purchase?】
    Price and Size.
    【How was it actually used?】
    I used it to attach MJN 24 to CUB 90. It is good feeling with Exactly.
    【Was it difficult to install? (Hard parts case)】
    Manifold of CUB 90 and hole Pitch match, but step adjustment is necessary.
    It is still difficult to balance with CUB 90 OEMAir cleaner.
    【Please tell me the point of installation and hang (in the case of Hard parts)】
    Although not particularly, it is safe to use liquid Gasket.
    【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
    None.
    [Is there anything I was disappointed about?]
    There is none.
    【Hope for Manufacturer - Please let me know if you have any improvement points]
    Although it is not especially, it is saved if it is a little cheaper.
    【Have you compared items?】
    YOSHIMURAOEM Manifold
    [Others]
    I bought it for installing MJN 24 in CUB 90. As far as the carburetor side is customized Exactly without gaps
    Attaches. On the Manifold side, 90 and Pitch are almost the same, but because there is a difference in level at the inlet, adjustment is essential.
    Depending on the year, it is difficult to use C90's OEMAir cleaner because the front and rear lengths of carburetor and Manifold increase.
    Become. If you process a C50 Air cleaner that is short and short, it seems to be possible somehow (But I have not tried it).
    It is relatively inexpensive but construction is solid and it is very good.
    It does not compare with Chinese cheap Manifold. When suddenly breaking or sucking secondary air with insufficient precision
    Because it leads to blow if you do not do it well, you'd better buy the right one like this product.

    【What made you decide the purchase?】
    Price and Size.
    【How was it actually used?】
    I used it to attach MJN 24 to CUB 90. It is good feeling with Exactly.
    【Was it difficult to install? (Hard parts case)】
    Manifold of CUB 90 and hole Pitch match, but step adjustment is necessary.
    It is still difficult to balance with CUB 90 OEMAir cleaner.
    【Please tell me the point of installation and hang (in the case of Hard parts)】
    Although not particularly, it is safe to use liquid Gasket.
    【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
    None.
    [Is there anything I was disappointed about?]
    There is none.
    【Hope for Manufacturer - Please let me know if you have any improvement points]
    Although it is not especially, it is saved if it is a little cheaper.
    【Have you compared items?】
    YOSHIMURAOEM Manifold
    [Others]
    I bought it for installing MJN 24 in CUB 90. As far as the carburetor side is customized Exactly without gaps
    Attaches. On the Manifold side, 90 and Pitch are almost the same, but because there is a difference in level at the inlet, adjustment is essential.
    Depending on the year, it is difficult to use C90's OEMAir cleaner because the front and rear lengths of carburetor and Manifold increase.
    Become. If you process a C50 Air cleaner that is short and short, it seems to be possible somehow (But I have not tried it).
    It is relatively inexpensive but construction is solid and it is very good.
    It does not compare with Chinese cheap Manifold. When suddenly breaking or sucking secondary air with insufficient precision
    Because it leads to blow if you do not do it well, you'd better buy the right one like this product.

    About 8 months passed since the installation, but deterioration of Rubber was not seen.
    A certain Manufacturer attached to the carburetor has cracked relatively early, but if it is this it may be likely to be present for several years.

    About 8 months passed since the installation, but deterioration of Rubber was not seen.
    A certain Manufacturer attached to the carburetor has cracked relatively early, but if it is this it may be likely to be present for several years.

    I am using it for APE 100 TMR 28.
    We support the weight of carburetor and Power Filter by itself, so we are exchanging once a year.
    As regular exchange is necessary, I think that I can endure this price.
    I hope I can use it for a while longer, but I think it depends on usage.

    I am using it for APE 100 TMR 28.
    We support the weight of carburetor and Power Filter by itself, so we are exchanging once a year.
    As regular exchange is necessary, I think that I can endure this price.
    I hope I can use it for a while longer, but I think it depends on usage.

สินค้าที่มีผู้เข้าชมมากที่สุด

【TaGu (Taguchi)】Shift Guide
ก้านเกียร์ TaGu (Taguchi) CBR1000RR Fireblade