หน้าแรก

【KAWASAKI】สติ้กเกอร์แปะ (ตัวหนังสือไม่มีขอบ)

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿198
คะแนนวีไบค์: 2

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

[ขนาด]
S (15 × 100 มม.)

[รายละเอียดสินค้า]

ปรับแต่งรถหรือหมวกกันน็อคของคุณได้อย่างง่ายดายด้วยสติกเกอร์โลโก้

รีวิวสินค้า

    Purchased to Motorcycle 's Under Cowl casually and looking Large bold. I like KawasakiOEMSticker. I pasted it on Under Cowl so it was hard to paste, but it was beautifully stuck.

    Due to the diversion of Light cowl, the thing of KLX 250 can be attached to SUPER SHERPA, I wanted to paste kawasaki's logo as One point, I wanted to paste and purchased it. I've been using White until now, but in Single Item I have only Red letters removed, so I put it on a black thing so I thought it would shine and purchased here.
    Put under treatment, paste the position roughly.
    It is easy to paste, it seems not to be peeled off.
    There are also a number of Size, so it is good to be able to use properly in each part.
    Light cowl is getting bigger and the characters of Red kawasaki are doing a good job, too.
    Parenthesis Finished well.

    【What made you decide the purchase?】 Inexpensive and effective (stand out)
    【How was it actually used?】 Since the screen of NINJA 2 Helmet 50 RSL is Small, I feel that Smallest S Size is slightly Large.
    【Was it difficult to install? (Hard parts case)】 It gets nervous when the position gaps, so it gets nervous when sticking.
    【Please tell me the point of installation and hang (in the case of Hard parts)】 Quantity : Pair (for Left and Right) Hitoshi etc. Simply mark it so that it is level and horizontal.
    [Is there anything I was disappointed about?] A little Large.
    【Hope for Manufacturer - Please let me know if there are any improvement points】 I wish I had SS Size, I mean Red, from the beginning.
    【Have you compared items?】 Black Logo mark.
    [Others] If you buy NINJA, be sure to change the paste. Silver is modest!

    First of all, it is Large Ki, but it is quite Large.
    I put it on the car Rear glass.

    Bubbles easily enter Sticker because of Large.
    I write the hang.

    1. Where to paste, clean up anyway.
    2. Spray on pasting surface and sticker with Spray for Car Film selling at car supplies shop etc.. (If it substitutes, a very small amount of neutral detergent is mixed with water)
    3. Paste the sticker and remove it with extra moisture with Rubber spatula. (It's fun to wear a Rubber spatula with a KitchenPaper roll)
    4. After a while, peel off Sticker 's Protection Film.
    5. Also complete with Rubber spatula with Kitchen Paper rolled! (Be careful as KitchenPaper rolls if you do not roll Sticker)

    It was a Sticker that required considerable dexterity.
    Let's ask a handy dexterous person if you are worried about doing it yourself.
    The delivery date took a while. I think that it was about a week.

    Please paste it and deepen Kawasaki love.

    By changing Screen of NINJA 2 Helmet 50 RR, the logo of Kawasaki that was in Normal screen disappeared, and Screen became a feeling of a double, so I decided to attach Kawasaki Logo in Normal screen style.
    The method of pasting is easy, after removing the release paper of Sticker from cleaning the pasting surface, place it on the sticking surface, firmly adhere the air bubbles inside with Dustcloth etc. from above and firmly adhere it, and finally put the upper mount Only letters will remain if you peel off.
    Size of this product is exactly good for Screen, Red color also matches Screen of Mirror Bracket type exclusive use.
    As you can enjoy Kawasaki Logo easily at low price I think that Large change is good.

    Since the Logo was not contained in the Screen at all, ZX-14R was purchased.Although the Size was a little [
    ] large, when it sticks on the portion with which the black Meter cover (Per Tutu who hides wiring of a Meter portion) and Screen of a Screen flesh side overlap, the Logo of 2 use of color is quite an Impact.
    There is dreadfulness of a black car-body (correctly Metallic-midnight Sapphire Blue) no one but, not a Green but this Body color was chosen, and it had a new appreciation of his having been Satoru Taisho!

สินค้าที่มีผู้เข้าชมมากที่สุด