It works, but the quality is... It's worth the price.
[How is it used? Used for Chain replacement.
Was the one you received as per Image? As per Image in the product description.
How was your experience with it? As per the Instruction Manual, I shaved off the head of the Chain's clasp Pin in advance. At first, I thought to shave only the clasp Pin of the side to be cut, but the Quantity:When I checked how to fix the Set, I decided to cut both of them in order to do it surely because it is only compressed by Bolt.
Quantity:When setting, there is a positioning function, and once the hang is grasped, Quantity:Set is easy. There are two types of cut bolts, one with a short pin end and the other with a long pin end, which must be used to cut the diaphragm pin. First, use the short pin end to push out the diaphragm pin to some extent, and then replace it with the long pin end. The short pin tip was fine, but the long pin tip was shaky because the center of the shaft was not out. The pin tip was shaky, so I was worried about whether I could push it out well, but it didn't lead to a large problem, and it did work. It's a shame because it was otherwise good.
It's a consumable item and the price is low, so I'm willing to accept the quality, but I'm a little concerned if it contains Level stuff that doesn't work.
[Points to note] Although it is written in the Instruction Manual, it is necessary to cut the head of Chain or ShimePin beforehand before use. If you don't do this, the pin of the cut bolt will not hit the center of the axis of the clamp pin well, and you will break the cut pin at worst.
How did it compare to other products? This is the only choice for low-priced products from the trusted FOR JAPAN MODELBrand.
Other items that would be helpful Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
ดูรายละเอียด
I used it on a nondescript 520Chain cut After one use, the tip of the Cut bolt was shaky and slightly bent.. I don't care if you ignore the instructions or not, but if you use it according to the instructions, this is not good
Many of Mr. KIJIMA's products have terrible accuracy in the Clutch & Brake lever I have It looks like the same thing happened to this one Chain Tool is so cheap that I thought it was a good idea to buy it, but You're a first-rate manufacturer and this is what you get! That's what I thought There are cheaper chain tools in the world, though
ดูรายละเอียด
Because Chain who was originally arrived was Endless's Chain, I looked at Net's information and examined various ways.
Because I thought about exchanging to the Clip expression, I thought that it is ok to just remove it at the beginning, though I thought about File, but apparently it would take a lot of time so it was none.
Think carefully and think about matching your Chain's Piece number yourself.
Although it was investigated originally, there was no problem in terms of how to use it, but the figure of the handling Instruction Manual that was attached was different from the product and I was puzzled.
The impression actually used was out of Pin frantly than I thought. It is recommended for people who use it for the first time and those who want to shorten the time.
ดูรายละเอียด
เครื่องมือลูกโซ่
ฉันซื้อมันเพื่อแลกโซ่
เนื่องจากเชนที่มาถึงแต่แรกคือ Endless's Chain ฉันจึงดูข้อมูลของ Net และตรวจสอบวิธีการต่างๆ
In order to make it free shipping, I bought it as a supplement for a hand-held tool. The Chain Tool I had before had the Pin out without breaking as shown in Photo Left while packing 420 Chain with 2 pictures. Originally I had for 420 Chain, so the Large is also small, but the thing I bought this time is Right Side and the 520 Size Chain is OK so it seems obviously robust. I think that we have prepared a good tool yet, although not used yet.
ดูรายละเอียด
เป็นการเติมเต็มของเครื่องมือช่าง
เพื่อที่จะให้จัดส่งฟรี ฉันซื้อมันเป็นอาหารเสริมสำหรับเครื่องมือมือถือ Chain Tool ที่ฉันเคยมีมาก่อนมีพินออกโดยไม่ทำลายดังแสดงในรูปภาพด้านซ้ายขณะบรรจุ 420 Chain พร้อมรูปภาพ 2 รูป เดิมทีฉันมีสำหรับ 420 Chain ดังนั้น Large ก็เล็กด้วย แต่สิ่งที่ฉันซื้อในครั้งนี้คือ Right Side และ 520 Size Chain ก็ใช้ได้ ดังนั้นมันจึงดูแข็งแกร่งอย่างเห็นได้ชัด ฉันคิดว่าเราได้เตรียมเครื่องมือที่ดีแล้ว แม้ว่าจะยังไม่ได้ใช้งาน
ดูรายละเอียด
I heard that Chain Tool can not buy things tens of thousands of yen if it was originally solid, but I can not put that far into what I use only once in a few years. Purchase inexpensive but expect KIJIMA's Brand. I can not do Crimp, but it is OK if I choose Chain of Clip joint. But short push Bolt used for the first time did not have any problem, but long pushed push to replace on the way is obviously bent in appearance, so I wonder if it can be used like this. I tried using it when I tried it.. It was not an Objection because it was usable, but this precision is impossible with rotating objects. I will definitely not buy it if I see it at hand at hand. But although I could use it once.
ดูรายละเอียด
ใช้กับรุ่นรถ: Others
It works, but the quality is... It's worth the price.
[How is it used?
Used for Chain replacement.
Was the one you received as per Image?
As per Image in the product description.
How was your experience with it?
As per the Instruction Manual, I shaved off the head of the Chain's clasp Pin in advance. At first, I thought to shave only the clasp Pin of the side to be cut, but the Quantity:When I checked how to fix the Set, I decided to cut both of them in order to do it surely because it is only compressed by Bolt.
Quantity:When setting, there is a positioning function, and once the hang is grasped, Quantity:Set is easy.
There are two types of cut bolts, one with a short pin end and the other with a long pin end, which must be used to cut the diaphragm pin. First, use the short pin end to push out the diaphragm pin to some extent, and then replace it with the long pin end.
The short pin tip was fine, but the long pin tip was shaky because the center of the shaft was not out.
The pin tip was shaky, so I was worried about whether I could push it out well, but it didn't lead to a large problem, and it did work.
It's a shame because it was otherwise good.
It's a consumable item and the price is low, so I'm willing to accept the quality, but I'm a little concerned if it contains Level stuff that doesn't work.
[Points to note]
Although it is written in the Instruction Manual, it is necessary to cut the head of Chain or ShimePin beforehand before use.
If you don't do this, the pin of the cut bolt will not hit the center of the axis of the clamp pin well, and you will break the cut pin at worst.
How did it compare to other products?
This is the only choice for low-priced products from the trusted FOR JAPAN MODELBrand.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer ดูรายละเอียด
ใช้งานได้จริงแต่คุณภาพ...สมราคา
[ใช้ยังไง?
แสดงที่มาใช้สำหรับเปลี่ยนโซ่
เป็นคนที่คุณได้รับตามภาพหรือไม่?
ตามภาพในรายละเอียดสินค้า
ประสบการณ์ของคุณกับมันเป็นอย่างไร?
ตามคู่มือการใช้งาน ฉันโกนหัวของเข็มกลัดของ Chain ออกล่วงหน้า ทีแรกนึกว่าจะโกนแค่เข็มกลัด หมุดด้านข้างที่จะตัด แต่ปริมาณ : พอเช็ควิธีซ่อมเซ็ตแล้ว เลยตัดสินใจผ่าทั้งสองอันเพื่อให้ได้มาแน่นอนเพราะอัดด้วย สายฟ้า.
ปริมาณ:เมื่อตั้งค่า จะมีฟังก์ชันกำหนดตำแหน่ง และเมื่อจับสายได้แล้ว ปริมาณ:ชุดจะเป็นเรื่องง่าย
สลักเกลียวตัดมีสองประเภท แบบหนึ่งมีปลายขาสั้น และอีกแบบมีปลายขายาว ซึ่งต้องใช้ตัดขาไดอะแฟรม ขั้นแรก ใช้ปลายพินแบบสั้นเพื่อดันพินไดอะแฟรมออกในระดับหนึ่ง จากนั้นแทนที่ด้วยปลายพินแบบยาว
ปลายหมุดสั้นนั้นใช้ได้ แต่ปลายหมุดยาวนั้นสั่นคลอนเพราะศูนย์กลางของก้านไม่หลุดออกมา
ปลายเข็มสั่น ฉันเลยกังวลว่าฉันจะดันมันออกมาได้ดีหรือไม่ แต่ก็ไม่ได้ทำให้เกิดปัญหาใหญ่ และมันใช้ได้ผล
น่าเสียดายเพราะอย่างอื่นดี
มันเป็นสินค้าสิ้นเปลืองและราคาต่ำ ดังนั้นฉันยินดีที่จะยอมรับคุณภาพ แต่ฉันกังวลเล็กน้อยถ้ามันมีเนื้อหาระดับที่ใช้งานไม่ได้
[จุดที่ควรทราบ]
แม้ว่าจะเขียนไว้ในคู่มือการใช้งาน แต่ก็จำเป็นต้องตัดหัวของ Chain หรือ ShimePin ก่อนใช้งาน
ถ้าคุณไม่ทำเช่นนี้ สลักของสลักเกลียวที่เจียระไนจะไม่กระทบกับศูนย์กลางของแกนของสลักแคลมป์ และคุณจะทำลายพินตัดอย่างแย่ที่สุด
เปรียบเทียบกับผลิตภัณฑ์อื่น ๆ ได้อย่างไร?
นี่เป็นทางเลือกเดียวสำหรับผลิตภัณฑ์ราคาถูกจากแบรนด์ FOR JAPAN MODEL ที่น่าเชื่อถือ
รายการอื่นๆ ที่จะเป็นประโยชน์
จุดติดตั้งและแขวน/รายการซื้อร่วมกัน/ ความคิดเห็นและคำขอไปยังผู้ผลิต ดูรายละเอียด
ใช้กับรุ่นรถ: Others
One use and..
I used it on a nondescript 520Chain cut
After one use, the tip of the Cut bolt was shaky and slightly bent..
I don't care if you ignore the instructions or not, but if you use it according to the instructions, this is not good
Many of Mr. KIJIMA's products have terrible accuracy in the Clutch & Brake lever I have
It looks like the same thing happened to this one
Chain Tool is so cheap that I thought it was a good idea to buy it, but
You're a first-rate manufacturer and this is what you get! That's what I thought
There are cheaper chain tools in the world, though ดูรายละเอียด
ใช้ครั้งเดียวและ..
ฉันใช้มันกับการตัด 520Chain ที่ไม่มีความหมาย
แสดงที่มาหลังจากใช้งานครั้งเดียว ปลายโบลต์คัทสั่นและงอเล็กน้อย..
ไม่สนใจหรอกว่าจะใช้คำสั่งหรือไม่ แต่ถ้าใช้ตามคำแนะนำก็ไม่ดี
ผลิตภัณฑ์ของคุณ KIJIMA จำนวนมากมีความแม่นยำที่แย่มากในคันคลัตช์และเบรกที่ผมมี
ดูเหมือนว่าสิ่งเดียวกันนี้เกิดขึ้นกับสิ่งนี้
Chain Tool ราคาถูกจนฉันคิดว่าควรซื้อ แต่
คุณเป็นผู้ผลิตชั้นหนึ่งและนี่คือสิ่งที่คุณได้รับ! นั่นคือสิ่งที่ฉันคิดว่า
มีเครื่องมือโซ่ที่ถูกกว่าในโลกแม้ว่า ดูรายละเอียด
ใช้กับรุ่นรถ: Others
Chain Tool
I bought it for Chain exchange.
Because Chain who was originally arrived was Endless's Chain, I looked at Net's information and examined various ways.
Because I thought about exchanging to the Clip expression, I thought that it is ok to just remove it at the beginning, though I thought about File, but apparently it would take a lot of time so it was none.
Think carefully and think about matching your Chain's Piece number yourself.
Although it was investigated originally, there was no problem in terms of how to use it, but the figure of the handling Instruction Manual that was attached was different from the product and I was puzzled.
The impression actually used was out of Pin frantly than I thought. It is recommended for people who use it for the first time and those who want to shorten the time. ดูรายละเอียด
เครื่องมือลูกโซ่
ฉันซื้อมันเพื่อแลกโซ่
แสดงที่มาเนื่องจากเชนที่มาถึงแต่แรกคือ Endless's Chain ฉันจึงดูข้อมูลของ Net และตรวจสอบวิธีการต่างๆ
เพราะฉันคิดจะเปลี่ยนไปใช้นิพจน์ของ Clip ฉันคิดว่ามันโอเคที่จะเอามันออกในตอนเริ่มต้น แม้ว่าฉันจะคิดถึง File แต่เห็นได้ชัดว่ามันใช้เวลานานดังนั้นจึงไม่มีเลย
คิดให้รอบคอบและคิดเกี่ยวกับการจับคู่หมายเลข Chain's Piece ของคุณเอง
แม้ว่าจะได้รับการตรวจสอบในขั้นต้นแล้ว แต่ก็ไม่มีปัญหาในแง่ของวิธีใช้งาน แต่รูปทรงของคู่มือการใช้งานที่แนบมานั้นแตกต่างจากผลิตภัณฑ์และฉันก็งง
ความประทับใจที่ใช้จริงนั้นออกมาจากพินอย่างเมามันกว่าที่คิด ขอแนะนำสำหรับผู้ที่ใช้เป็นครั้งแรกและผู้ที่ต้องการย่นเวลา ดูรายละเอียด
ใช้กับรุ่นรถ: Others
It is replenishment of hand tools.
In order to make it free shipping, I bought it as a supplement for a hand-held tool.
The Chain Tool I had before had the Pin out without breaking as shown in Photo Left while packing 420 Chain with 2 pictures. Originally I had for 420 Chain, so the Large is also small, but the thing I bought this time is Right Side and the 520 Size Chain is OK so it seems obviously robust.
I think that we have prepared a good tool yet, although not used yet. ดูรายละเอียด
เป็นการเติมเต็มของเครื่องมือช่าง
เพื่อที่จะให้จัดส่งฟรี ฉันซื้อมันเป็นอาหารเสริมสำหรับเครื่องมือมือถือ
แสดงที่มาChain Tool ที่ฉันเคยมีมาก่อนมีพินออกโดยไม่ทำลายดังแสดงในรูปภาพด้านซ้ายขณะบรรจุ 420 Chain พร้อมรูปภาพ 2 รูป เดิมทีฉันมีสำหรับ 420 Chain ดังนั้น Large ก็เล็กด้วย แต่สิ่งที่ฉันซื้อในครั้งนี้คือ Right Side และ 520 Size Chain ก็ใช้ได้ ดังนั้นมันจึงดูแข็งแกร่งอย่างเห็นได้ชัด
ฉันคิดว่าเราได้เตรียมเครื่องมือที่ดีแล้ว แม้ว่าจะยังไม่ได้ใช้งาน ดูรายละเอียด
ใช้กับรุ่นรถ: Others
Is it a price?. I could use it.
I heard that Chain Tool can not buy things tens of thousands of yen if it was originally solid, but I can not put that far into what I use only once in a few years. Purchase inexpensive but expect KIJIMA's Brand. I can not do Crimp, but it is OK if I choose Chain of Clip joint.
But short push Bolt used for the first time did not have any problem, but long pushed push to replace on the way is obviously bent in appearance, so I wonder if it can be used like this. I tried using it when I tried it.. It was not an Objection because it was usable, but this precision is impossible with rotating objects. I will definitely not buy it if I see it at hand at hand. But although I could use it once. ดูรายละเอียด
เป็นราคา?. ฉันสามารถใช้มันได้
ฉันได้ยินมาว่า Chain Tool ไม่สามารถซื้อของหลายหมื่นเยนได้ถ้ามันเป็นของแข็ง แต่ฉันไม่สามารถใส่ไปไกลถึงสิ่งที่ฉันใช้เพียงครั้งเดียวในไม่กี่ปี ซื้อราคาไม่แพง แต่คาดหวังแบรนด์ของ KIJIMA ฉันไม่สามารถทำ Crimp ได้ แต่ก็โอเคถ้าฉันเลือกข้อต่อ Chain of Clip
แสดงที่มาแต่โบลต์กดสั้นๆ ที่ใช้ครั้งแรกไม่ได้มีปัญหาอะไร แต่ดันยาวเข้าไปเปลี่ยนระหว่างทางมีลักษณะโค้งงออย่างเห็นได้ชัด เลยสงสัยว่าจะใช้แบบนี้ได้หรือเปล่า ฉันพยายามใช้มันเมื่อฉันลอง.. มันไม่ใช่การคัดค้านเพราะมันใช้งานได้ แต่ความแม่นยำนี้เป็นไปไม่ได้กับวัตถุที่หมุนได้ ฉันจะไม่ซื้อมันแน่นอนถ้าฉันเห็นมันอยู่ในมือ แต่ถึงแม้ฉันจะใช้มันได้ครั้งเดียว ดูรายละเอียด