- หน้าแรก
- ความเห็นต่อสินค้า
- อะไหล่แต่ง
- ระบบส่งกำลัง มอเตอร์ไซค์
- ชุดชามข้างมอเตอร์ไซค์
- ชุดชามข้างมอเตอร์ไซค์
- ชุดชามข้างมอเตอร์ไซค์
- ไม่ค่อยมีประสิทธ... (KN Planning: Bearing Slider)
【KN Planning】Bearing Slider Review
ใช้กับรุ่นรถ: YAMAHA JOG, YAMAHA VINO, YAMAHA AXIS 90, YAMAHA GRAND AXIS, YAMAHA SUPER JOG ZR, YAMAHA BJ, YAMAHA BWS100(BWS), YAMAHA BWS50, YAMAHA APRIO, YAMAHA JOG, YAMAHA JOG, YAMAHA JOG90, YAMAHA JOGC, YAMAHA YV50 Z II, YAMAHA JOG Zr, YAMAHA SUPER JOGZ, YAMAHA VINO(2Cycle), YAMAHA Remote controller jogZr
Not very effective in Normal spring.
Used in 4jp5APRIO
I was considering whether to use a stiffer center spring when I remembered this product, so I purchased it.
I thought that if I put the BearingSlider in before stiffening the Sensep, I would be able to apply a little more load to the Spring than in the OEM condition.
I'm not sure how effective it is, but I think it will be useful when I replace the Sensep and make it harder, because I think it will absorb the twisting.
As for the quality and texture, well, there is a slight BALI on the processed finish, so I lightly removed the BALI with sandpaper before injuring my hand.
The precision of the ball in the Slide section was also gurgling when turned by hand with load, so I put a few drops of Bell Hammer Gold on it and turned it by hand until it became accustomed to it.
The gurgling feeling is almost gone, but I think it is better to degrease the oil thoroughly before assembling because it may fly out.
I don't think it is necessary to add oil to the parts since they are not usually high-revving parts.
ไม่ค่อยมีประสิทธิภาพในสปริงปกติ
ใช้ใน 4jp5APRIO
ฉันกำลังพิจารณาว่าจะใช้สปริงตรงกลางที่แข็งกว่านี้หรือไม่เมื่อฉันจำผลิตภัณฑ์นี้ได้ ฉันก็เลยซื้อมันมา
ฉันคิดว่าถ้าฉันใส่ BearingSlider เข้าไปก่อนที่จะทำให้ Sensep แข็งตัว ฉันจะสามารถรับน้ำหนักกับ Spring ได้มากกว่าในสภาพของ OEM เล็กน้อย
ฉันไม่แน่ใจว่ามันมีประสิทธิภาพแค่ไหน แต่ฉันคิดว่ามันจะมีประโยชน์เมื่อฉันเปลี่ยน Sensep และทำให้ยากขึ้นเพราะฉันคิดว่ามันจะดูดซับการบิด
สำหรับคุณภาพและเนื้อสัมผัส ก็มี BALI เล็กน้อยที่ผิวงานผ่านกระบวนการ ดังนั้นฉันจึงเอากระดาษทราย BALI ออกเล็กน้อยก่อนที่จะทำร้ายมือ
ความแม่นยำของลูกบอลในส่วนสไลด์ก็กระตุกเช่นกันเมื่อหมุนด้วยมือพร้อมกับโหลด ดังนั้นฉันจึงใส่ Bell Hammer Gold สองสามหยดลงไปแล้วหมุนด้วยมือจนคุ้นเคย
ความรู้สึกไหลรินเกือบจะหายไปแล้ว แต่ฉันคิดว่าควรล้างน้ำมันให้ทั่วก่อนที่จะประกอบเพราะมันอาจลอยออกมาได้
ฉันไม่คิดว่าจำเป็นต้องเติมน้ำมันให้กับชิ้นส่วนต่างๆ เนื่องจากปกติแล้วชิ้นส่วนเหล่านี้ไม่ใช่ชิ้นส่วนที่มีรอบเครื่องสูง