- หน้าแรก
- ความเห็นต่อสินค้า
- อะไหล่แต่ง
- แฮนค์/อะไหล่แฮนค์
- อุดรูกระจก
- เนื้อดี. เรียบแต่... (MORIWAKI: Mirror Hole Cover)
【MORIWAKI】Mirror Hole Cover Review
ใช้กับรุ่นรถ: KAWASAKI Ninja400, KAWASAKI NinjaZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Good texture. Sober but elaborate construction, unobtrusive in a good way.
I've decided to remove the Mirror as I have more opportunities to run on Circuit.
I've been looking for a Can Seraar because my aesthetic sense won't allow me to just remove it.
I've seen other Manufacturers with less than stellar reputations and flashy, expensive products.
intermediate between the two. (?) I decided to go with this one.
As a side note, this is my first MORIWAKI product.
I don't have much luck with KAWASAKI.
The black anodized glossy finish is a great way to hold down the claims of the Parts.
The logo is properly included in the proportion of the three, and it also has some three-dimensional modeling.
It is an elaborate construction and I am personally very satisfied with it.
The reaction makes Bolt's head stand out.
So, I made the Plate about 1mm thicker and the outline about 1mm larger.
If you make the Bolt a plate Bolt and make the Plate surface flat, you get 100 points.
The price seems rather high, but it can't be helped.
It's not like it's going to break, it's not going to sell in quantity, and it's going to cost a lot of money to build ... .
It is much cheaper than One-off production.
เนื้อดี. เรียบแต่ปราณีต ไม่สร้างความรำคาญในทางที่ดี
ฉันตัดสินใจถอดกระจกออกเนื่องจากมีโอกาสมากขึ้นที่จะวิ่งบนเซอร์กิต
ฉันกำลังมองหา Can Seraar เพราะความรู้สึกด้านสุนทรียะของฉันไม่อนุญาตให้ฉันถอดมันออก
ฉันเคยเห็นผู้ผลิตรายอื่นที่มีชื่อเสียงน้อยกว่าและผลิตภัณฑ์ราคาแพงที่ฉูดฉาด
ตรงกลางระหว่างทั้งสอง (?) ฉันตัดสินใจที่จะไปกับอันนี้
เพื่อเป็นข้อสังเกต นี่เป็นผลิตภัณฑ์ MORIWAKI แรกของฉัน
ฉันไม่ค่อยโชคดีกับ KAWASAKI
พื้นผิวเคลือบมันสีดำแบบอะโนไดซ์เป็นวิธีที่ยอดเยี่ยมในการยึดข้อเรียกร้องของชิ้นส่วนต่างๆ
โลโก้ถูกรวมไว้ในสัดส่วนของทั้งสามอย่างถูกต้อง และยังมีการสร้างแบบจำลองสามมิติด้วย
เป็นการก่อสร้างที่ประณีตและโดยส่วนตัวแล้วฉันพอใจกับมันมาก
ปฏิกิริยาดังกล่าวทำให้หัวของโบลต์โดดเด่น
ดังนั้นฉันจึงทำให้เพลทหนาขึ้นประมาณ 1 มม. และโครงร่างใหญ่ขึ้นประมาณ 1 มม.
หากคุณทำให้โบลต์เป็นโบลต์เพลท และทำให้พื้นผิวเพลทเรียบ คุณจะได้ 100 คะแนน
ราคาดูเหมือนค่อนข้างสูง แต่ก็ช่วยไม่ได้
ไม่ใช่ว่ามันจะพัง ไม่ขายตามปริมาณ และจะต้องใช้เงินจำนวนมากในการสร้าง ... .
ราคาถูกกว่าการผลิตแบบครั้งเดียวมาก
ตอบกลับ
ความคิดเห็นอื่น ๆ
ฝาครอบรูกระจก
ฉันซื้อสิ่งนี้เพื่อการแข่งขันเซอร์กิต ฉันคิดว่าฉันสามารถจัดการได้โดยปราศจากมัน แต่ …… มันดูดีกว่าปล่อยทิ้งไว้
สีเป็นสีดำและเป็นแบบเรียบ แต่พื้นผิวนั้นดี และเครื่องหมายโลโก้ที่แกะสลักแบบสบาย ๆ นั้นสุขุมรอบคอบ แต่มีความแน่วแน่ปานกลาง
ฉันไม่สามารถใช้มันบนถนนสาธารณะ ดังนั้นฉันจึงตั้งตารอเซสชั่นการขับขี่
ดูรายละเอียด