หน้าแรก

【KITACO】Head Carburetor Kit KEIHIN PC Φ20

    • ความพึงพอใจ:

      Stability and pc 20

      • ผู้แสดงความคิดเห็น: Japan User(translated)
      • เผยแพร่เมื่อ: 2017-09-05 12:43:23
      I got three in the past.
      It is the third purchase..
      It was 70cc this time, so it was Large as it was with Jet out of the box.
      It is carburetor which gives strength to normal when the set goes to some extent and turns to Mild and fuel efficiency is also good..

      ตอบกลับ

      ลงทะเบียนเพื่อแสดงความคิดเห็น [ลงทะเบียนแบบสมบูรณ์]

      ความคิดเห็นอื่น ๆ

      75-cc bore up of the monkey centrifugal Third gear engine was performed, and it added to its purchase after that.
      By attachment, improvement in torque and the maximum high speed is found clearly.
      Since the span of adjustable range was wide, setting was also decided simply than expected.
      # It has come out exactly by 75-#35.
      That which has broken (it is satisfactory to use) is sorry fairly weak [ the drain of a carburetor being cut off and a heat shield plate ] on the design of an inlet manifold.

      Although attached to 50 cc, it arranges very much.
      Although the maximum high speed has changed only the muffler, I feel that it was extended as 10 K for that [ one's ].
      .
      although it is not in a photograph, a wire also follows -- Although it is a beginner in time, a carburetor will touch the upper part at the time of the attachment completed in about 1 hour... a plastic with black it being a little worrisome -- although like, a strange thing like a tongue which has come out is with what -- It buys and still unknown -- -

      Although attached after bore up, the engine performance of the motorcycle was increased clearly.
      Since setting can also be made fairly broad, after bore up is recommended.

      It uses for JAZZ.
      It purchases as if it is right since OH of the carburetor was required.
      I think that it is with it being easy to be splendid as comment! I think that has setting come out and beginners can also attach somehow (^-^)/

      Although attached by the Normal monkey, it is preeminent for sense-of-security sense of stability. The
      ease of treating is also easy to be that of established reputation owner る.
      He bought it, and thought that it was good, and it is recommended.

      Bore up to 75cc of KITACO, purchasing PC20 which carburetor wanted from before! It is surprising to run properly with the ponding! It is a sense of stability and it is Takeyoshi Keihin!

      It's a maid in Japan made by Keihin, as expected. Bore up, High Camshaft Last time it was a Big carburetor, will you try setting a bit more? Cost personally would you like to try harder?

      I got three in the past.
      It is the third purchase..
      It was 70cc this time, so it was Large as it was with Jet out of the box.
      It is carburetor which gives strength to normal when the set goes to some extent and turns to Mild and fuel efficiency is also good..

      It's a maid in Japan made by Keihin, as expected. Bore up, High Camshaft Last time it was a Big carburetor, will you try setting a bit more? Cost personally would you like to try harder?

      Bore up to 75cc of KITACO, purchasing PC20 which carburetor wanted from before! It is surprising to run properly with the ponding! It is a sense of stability and it is Takeyoshi Keihin!

      Although attached by the Normal monkey, it is preeminent for sense-of-security sense of stability. The
      ease of treating is also easy to be that of established reputation owner る.
      He bought it, and thought that it was good, and it is recommended.

      It uses for JAZZ.
      It purchases as if it is right since OH of the carburetor was required.
      I think that it is with it being easy to be splendid as comment! I think that has setting come out and beginners can also attach somehow (^-^)/

      Although attached after bore up, the engine performance of the motorcycle was increased clearly.
      Since setting can also be made fairly broad, after bore up is recommended.

      Although attached to 50 cc, it arranges very much.
      Although the maximum high speed has changed only the muffler, I feel that it was extended as 10 K for that [ one's ].
      .
      although it is not in a photograph, a wire also follows -- Although it is a beginner in time, a carburetor will touch the upper part at the time of the attachment completed in about 1 hour... a plastic with black it being a little worrisome -- although like, a strange thing like a tongue which has come out is with what -- It buys and still unknown -- -

      75-cc bore up of the monkey centrifugal Third gear engine was performed, and it added to its purchase after that.
      By attachment, improvement in torque and the maximum high speed is found clearly.
      Since the span of adjustable range was wide, setting was also decided simply than expected.
      # It has come out exactly by 75-#35.
      That which has broken (it is satisfactory to use) is sorry fairly weak [ the drain of a carburetor being cut off and a heat shield plate ] on the design of an inlet manifold.