- หน้าแรก
- ความเห็นต่อสินค้า
- อุปกรณ์
- กระเป๋ารถมอเตอร์ไซค์
- กล่องอื่นๆ
- ฝาครอบป้องกันการ... (GIVI: [Repair Parts] Protection Cap For Base Side)
【GIVI】[Repair Parts] Protection Cap For Base Side Review
ใช้กับรุ่นรถ: その他 general purpose
Contact protection Cap.
[How is it used?
It is installed to protect the Stop-lampWiring contacts when the GIVI box is removed from the vehicle body side Mount base.
Was the one you received as per Image?
Since it is only fixed by inserting the two Pins inside the protective Cap, it seems like it might come loose and come off due to vibration, but so far it is safe.
Was the installation difficult?
Simply place the protective cap over the contacts and push it in. If you push it in too tight, it will be difficult to remove, so push it in with moderate force. When removing the cap, insert a thin slotted screwdriver into the gap and gently pry all the way around the protective cap.
How was your experience with it?
Unfortunately, it is not waterproof, so before covering with a protective cap, a thin layer of grease is applied to the contact points to prevent rusting.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
If it was going to provide protection anyway, it would have been nice to have waterproof performance as well.
Other items that would be helpful
Point or hang of installation:Do not push in hard.
Availability of Instruction Manual:Instruction Manual is not included.
Opinions and requests to Manufacturer:Waterproof performance would be nice.
ฝาครอบป้องกันการสัมผัส
[ใช้ยังไง?
มีการติดตั้งเพื่อป้องกันหน้าสัมผัส Stop-lampWiring เมื่อถอดกล่อง GIVI ออกจากฐานติดตั้งด้านข้างตัวรถ
เป็นคนที่คุณได้รับตามภาพหรือไม่?
เนื่องจากมันได้รับการแก้ไขโดยการใส่พินสองอันเข้าไปในฝาครอบป้องกันเท่านั้น ดูเหมือนว่ามันอาจจะหลวมและหลุดออกมาเนื่องจากการสั่นสะท้าน แต่จนถึงตอนนี้ก็ปลอดภัยแล้ว
การติดตั้งทำได้ยากหรือไม่?
เพียงวางฝาครอบป้องกันไว้เหนือหน้าสัมผัสแล้วดันเข้าไป หากคุณดันเข้าไปแน่นเกินไป ถอดออกได้ยาก ดังนั้นให้ดันเข้าไปด้วยแรงปานกลาง เมื่อถอดฝาครอบ ให้สอดไขควงปากแบนบาง ๆ เข้าไปในช่องว่างและค่อยๆ แงะรอบๆ ฝาครอบป้องกัน
ประสบการณ์ของคุณกับมันเป็นอย่างไร?
น่าเสียดายที่มันไม่กันน้ำ ดังนั้นก่อนที่จะปิดฝาป้องกัน จาระบีบางๆ จะถูกนำไปใช้กับจุดสัมผัสเพื่อป้องกันการเกิดสนิม
[รวมอะไหล่: พวกเขาเปิด?
ไม่มี
[มีอะไรที่ทำให้คุณผิดหวังไหม?
ถ้ามันจะให้การป้องกันอยู่แล้ว ก็คงจะดีถ้ามีประสิทธิภาพในการกันน้ำด้วย
รายการอื่นๆ ที่จะเป็นประโยชน์
จุดหรือแฮงค์ของการติดตั้ง: อย่ากดแรง
คู่มือการใช้งาน: ไม่รวมคู่มือการใช้งาน.
ความคิดเห็นและคำขอของผู้ผลิต: ประสิทธิภาพการกันน้ำคงจะดี
ตอบกลับ
ความคิดเห็นอื่น ๆ
ขนาดไม่พอดีตัว
เป็นส่วนน้อยก็เลยซื้อเป็นอะไหล่เผื่อทำหาย
พอลองประกอบเข้าก็ลึกไม่พอ
งานตัดจะดำเนินการโดยใช้เครื่องตัด ฯลฯ
แอบผิดหวังเล็กๆ ที่ใส่ Smooth ไม่ได้
ดูรายละเอียด