หน้าแรก

【TANAX】Off-set Holder 45

    • ความพึงพอใจ:

      TANAX Off-set Holder 45

      • ผู้แสดงความคิดเห็น: anatoliy
      • เผยแพร่เมื่อ: 2019-11-28 04:47:17
      Качество очень отличное.Превосходный внешний вид изделию придаёт отменное качество гладкого и зеркального покрытия хромом.До установки этих расширителей зеркал у меня стояли простые чёрные расширители зеркал,внешний вид был не очень впечатляющий.После установки установки хромированных расширителей внешний вид преобразился,выглядит очень изящно.Болты можно было применить на 5мм длиньше,так как у меня стоит защита рук гайра,эти немного короткие.После установки намного лучше обзор сзади.Очень доволен. The quality is very excellent. The excellent appearance of the product gives the excellent quality of a smooth and mirror chrome finish. Before installing these mirror expanders, I had simple black mirror expanders, the appearance was not very impressive. After installing the chrome extenders, the appearance changed, it looks very elegant. The bolts could be applied 5mm longer, since I have a guyra hand protection, these are a little short. After installation, the rear view is much better. Very satisfied. translated by google translate

      ตอบกลับ

      ลงทะเบียนเพื่อแสดงความคิดเห็น [ลงทะเบียนแบบสมบูรณ์]

      ความคิดเห็นอื่น ๆ

      I ride with OEMHandlebar and OEMMirror of CB 1300 SF but because I attached a 48 L top box to Rear and 186 cm in height and 87 kg in weight and the Large pattern, I installed it today because the back was difficult to see.
      As far as I straddled you can see the back pat.. I am out from the handlebar by that much, but I'd like to see Balance with the firmness of the angle adjustment and the ease of viewing.
      I can see the back more than anything and I feel secure..

      When NORMAL is looking into Mirror it is necessary to move not only the line of sight but also the face Mirror Purchase according to exchange.

      Thanks to that, Mirror can now check by eye movement only.

      Following Offset Holder 30 SA-23 purchased for RightMirror, purchased for LeftMirror.
      SA-23 (30mmOffset) Similarly made well, as visibility improved behind the target as satisfied.
      However, it is longer than SA - 23 (Large Yu) So, there seems to be a slight sense of incongruity.
      (It is unavoidable since Mirror does not shake, it is got firmly made making it)

      I gradually changed it to a long product in order to make it look a little even behind, but finally I arrived at this product that is Offset the most.
      Movement of 45 mm is effective Large, so that you can see almost back right.
      Strength is also thicker and thicker than any product, and installation Bolt was tightened as well.
      It is not a bit SMART, but it seems to be easier to discover who wears Blue clothes.

      【What made you decide the purchase?】
      I am on DUCATI HYPERPEGASO 650 STRADA, but Position is close to the off car.
      Small OEM Mirror (Moreover, Small towards the outside) , Because it is in a low position,
      I am concerned that a considerable eye movement is necessary for backward confirmation,
      Because it seemed possible to adjust Mirror position freely back and forth.

      【How was it actually used?】
      I tried to bite Polygon Mirror of Takegawa.
      Polygon Mirror was very difficult to adjust because the adjustment width of Mirror part was very small,
      Thanks to that, the backward check has become much better.
      (Immediately after installation, I noticed the White horse of Blue clothes by the back from behind on the expressway!)
      I also have solid paint and it's better to choose Black and Chromium Plating.

      【Was it difficult to install? (Hard parts case)】
      The installation itself is not difficult, but I need M10Screw's Hexagonal Wrench.

      【Please tell me the point of installation and hang (in the case of Hard parts)】
      In the beginning, I feel a little loose.
      Since I was planning to tighten it considerably strongly in hand lug Wrench, I had the tools stationed and went touring.
      Now that the position has been decided, I coped with Screw lock.

      [Is there anything I was disappointed about?]
      It was also in Impre of the other person - - - The appearance is not good.
      However, there are some effects that compensate for it.

      【Hope for Manufacturer - Please let me know if you have any improvement points]
      It is good to increase several types of patterns, but at this price you can not say luxury if it is effective.

      【Have you compared items?】
      Tanax Napole On Offset Holder 30 SA-23
      (Shorter one of this product)

      Quantity : Pair (for Left and Right) Together, it was installed so that it Offset 45 mm laterally. My arm was reflected on Mirror and confirmed just behind was difficult, but it improved considerably.

      I tried grabbing the actual thing in my hand and gotting a little more than I thought it was a little bit brisk..
      Because I made it to Brake master outside the company, I wanted to make sure that the Mirror position got closer to the front than the Left Side,
      I wanted to broaden the rear field of view sideways so I bought it.
      I am satisfied that these troubles were solved at once.
      As I wrote in the beginning, the real thing is to make Large change steadily so there is no worry about play after installation.
      However, it is still awkward and there is quite a presence, and if it is Slim a little more I think Iina.

      In the NORMAL state of Z125, Mirror got too close to the inside, so it was a little low, so I was bothered to confirm the backwards, so I bought it.
      After exchanging height can be raised and sideways also moved so that you can check by eye movement only. Attention is necessary when rubbing through by Mirror moving sideways.

      When I dressed in winter, it was a matter of trouble that I could have more blind spots in Mirror.
      Tentatively what is something like 1pc. I bought it and tried it.
      Mirror's range of motion became Large, and the width of Mirror became visible just behind while fitting it within Handlebar.
      However, since there is slight vibration compared to not being installed, the scenery will be blurred depending on the running speed. Both Sides It was tough to shake and the Right Side Mirror was originally visible to some extent so we decided to use only Left Side Mirror.

      Installed for improving rearward visibility of CROSS 3.
      I need 8 mm Hexagonal Wrench for installation.
      Since there was only 6 mm of the Z250 on-board tool, we recommend that you work before confirming the tool at hand.
      Performance is as expected and Large satisfied.

      ? 【What made you decide the purchase?】 When changing Mirror of TMAX 530 from Cowl to Handlebar Mounting, because behind was not seen at all.
      ? 【How was it actually used?】 The backward visibility has become outstandingly better.
      ? 【Was it difficult to install? (Hard parts case)】 It's pretty easy.
      ? 【Please tell me the point of installation and hang (in the case of Hard parts)】 Parts come around with tightening, so tightening is necessary while holding firmly.
      ? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
      ? [Is there anything I was disappointed about?] None. It is as expected.
      ? [Request to Manufacturer - Please tell me if there are any improvement points】 Lineup of Tanax is really wide and I like Large.
      ? 【Have you compared items?】 OffsetHolder30
      ? [Others] The product is wonderful, but I feel frustrated that the aftertaste feeling is strong.

      Purchase to bring out the Mirror root.
      Good thickness that does not feel anxiety of shaking vibration is good.
      I'm attaching Mirror (Tanax) Because it was also suitable for Arm shape of Arm, it became a good appearance which made it difficult to feel the part because it was an extra item added afterwards, so it was good not to make it yourself.

      ? 【What made you decide the purchase?】 When changing Mirror of TMAX 530 from Cowl to Handlebar Mounting, because behind was not seen at all.
      ? 【How was it actually used?】 The backward visibility has become outstandingly better.
      ? 【Was it difficult to install? (Hard parts case)】 It's pretty easy.
      ? 【Please tell me the point of installation and hang (in the case of Hard parts)】 Parts come around with tightening, so tightening is necessary while holding firmly.
      ? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
      ? [Is there anything I was disappointed about?] None. It is as expected.
      ? [Request to Manufacturer - Please tell me if there are any improvement points】 Lineup of Tanax is really wide and I like Large.
      ? 【Have you compared items?】 OffsetHolder30
      ? [Others] The product is wonderful, but I feel frustrated that the aftertaste feeling is strong.

      Installed for improving rearward visibility of CROSS 3.
      I need 8 mm Hexagonal Wrench for installation.
      Since there was only 6 mm of the Z250 on-board tool, we recommend that you work before confirming the tool at hand.
      Performance is as expected and Large satisfied.

      When I dressed in winter, it was a matter of trouble that I could have more blind spots in Mirror.
      Tentatively what is something like 1pc. I bought it and tried it.
      Mirror's range of motion became Large, and the width of Mirror became visible just behind while fitting it within Handlebar.
      However, since there is slight vibration compared to not being installed, the scenery will be blurred depending on the running speed. Both Sides It was tough to shake and the Right Side Mirror was originally visible to some extent so we decided to use only Left Side Mirror.

      In the NORMAL state of Z125, Mirror got too close to the inside, so it was a little low, so I was bothered to confirm the backwards, so I bought it.
      After exchanging height can be raised and sideways also moved so that you can check by eye movement only. Attention is necessary when rubbing through by Mirror moving sideways.

      I tried grabbing the actual thing in my hand and gotting a little more than I thought it was a little bit brisk..
      Because I made it to Brake master outside the company, I wanted to make sure that the Mirror position got closer to the front than the Left Side,
      I wanted to broaden the rear field of view sideways so I bought it.
      I am satisfied that these troubles were solved at once.
      As I wrote in the beginning, the real thing is to make Large change steadily so there is no worry about play after installation.
      However, it is still awkward and there is quite a presence, and if it is Slim a little more I think Iina.

      Quantity : Pair (for Left and Right) Together, it was installed so that it Offset 45 mm laterally. My arm was reflected on Mirror and confirmed just behind was difficult, but it improved considerably.

      【What made you decide the purchase?】
      I am on DUCATI HYPERPEGASO 650 STRADA, but Position is close to the off car.
      Small OEM Mirror (Moreover, Small towards the outside) , Because it is in a low position,
      I am concerned that a considerable eye movement is necessary for backward confirmation,
      Because it seemed possible to adjust Mirror position freely back and forth.

      【How was it actually used?】
      I tried to bite Polygon Mirror of Takegawa.
      Polygon Mirror was very difficult to adjust because the adjustment width of Mirror part was very small,
      Thanks to that, the backward check has become much better.
      (Immediately after installation, I noticed the White horse of Blue clothes by the back from behind on the expressway!)
      I also have solid paint and it's better to choose Black and Chromium Plating.

      【Was it difficult to install? (Hard parts case)】
      The installation itself is not difficult, but I need M10Screw's Hexagonal Wrench.

      【Please tell me the point of installation and hang (in the case of Hard parts)】
      In the beginning, I feel a little loose.
      Since I was planning to tighten it considerably strongly in hand lug Wrench, I had the tools stationed and went touring.
      Now that the position has been decided, I coped with Screw lock.

      [Is there anything I was disappointed about?]
      It was also in Impre of the other person - - - The appearance is not good.
      However, there are some effects that compensate for it.

      【Hope for Manufacturer - Please let me know if you have any improvement points]
      It is good to increase several types of patterns, but at this price you can not say luxury if it is effective.

      【Have you compared items?】
      Tanax Napole On Offset Holder 30 SA-23
      (Shorter one of this product)

      I gradually changed it to a long product in order to make it look a little even behind, but finally I arrived at this product that is Offset the most.
      Movement of 45 mm is effective Large, so that you can see almost back right.
      Strength is also thicker and thicker than any product, and installation Bolt was tightened as well.
      It is not a bit SMART, but it seems to be easier to discover who wears Blue clothes.