หน้าแรก

【M&H MATSUSHIMA】PH7 Halogen Bulb Bike Beam

    • ความพึงพอใจ:

      You seem to have become somewhat brighter?

      • ผู้แสดงความคิดเห็น: Japan User(translated)
      • เผยแพร่เมื่อ: 2018-04-22 06:01:26
      Since NORMAL is brightness like a flashlight, I bought it as much as I thought, it seems that the Large part has become brighter in the Tunnel, so it will be enough so that the basic night will not run, after that it is durable What?

      ตอบกลับ

      ลงทะเบียนเพื่อแสดงความคิดเห็น [ลงทะเบียนแบบสมบูรณ์]

      ความคิดเห็นอื่น ๆ

      Since it used by commuting, it thought that a not much showy color was unsavory, and it was made the CLEAR.
      -- a pure color -- clever -- it is the touch which came out as it is and became bright the 1 surroundings. although there are few

      custom-made elements, visibility is also good and brightness is also perfect -- it is .
      which puts in a Harness high in taking the Risk of the
      > Trouble and putting in the Valve of high wattage -- considering things, I think that a Cost performance is high.

      Although it was exchanged from the LED manufactured by China, I thought that the LED was bright as it was, but because of optical axis and various problems, I replaced it with Halogen B 2 C of Pine Stripe.
      While changing from LED to Halogen, I was prepared for a considerable amount of light Down, but what is not enough brightness! And, unlike LEDs Lo. Hi change is also clear! Clearly! It is different from the LED! It was the correct answer after exchanging for Halogen! Those who feel dark in this Valve think that repair of the electrical system is necessary (LOL smile)
      Obviously it is brighter than OEMHalogen bulb! Naturally (LOL smile)...

      I used 12v 30w thing attached to masters.
      Certainly Home centeretc. Compared with the sola sold in. (It will not brighten dramatically)
      However, whether the solder used for the contact part with the electrode of Valve is not very good, or if it ran about 4000 km, the solder melted with heat and broke.
      It may be a fate of high efficiency Valve, but it is too bad that the price is expensive.

      I replaced it with ReflectorHead lamp of Tanaka Shokai but purchased this because the attached BlueHalogen is not so bright.

      As written in the joked package 'Bright' is!!

      Both high and low will be pretty bright. I am satisfied..

      I intended to replace it from an OEM bulb, but as I tried to replace it was the same form of Small thread
      Halogen bulb was equipped. (Because I had never been replaced by a used car)

      It may be affecting that the current Lamp ball was blacked a bit,
      It got much brighter. Speed ??of the original is nearly satisfying brightness.
      Not only the irradiation destination, but also the hand is bright feeling.

      The light source is also very natural color and safe.

      The price is about 3 times as much as the OEM ball, but I think that it is worth the price.

      I intended to replace it from an OEM bulb, but as I tried to replace it was the same form of Small thread
      Halogen bulb was equipped. (Because I had never been replaced by a used car)

      It may be affecting that the current Lamp ball was blacked a bit,
      It got much brighter. Speed ??of the original is nearly satisfying brightness.
      Not only the irradiation destination, but also the hand is bright feeling.

      The light source is also very natural color and safe.

      The price is about 3 times as much as the OEM ball, but I think that it is worth the price.

      I replaced it with ReflectorHead lamp of Tanaka Shokai but purchased this because the attached BlueHalogen is not so bright.

      As written in the joked package 'Bright' is!!

      Both high and low will be pretty bright. I am satisfied..

      I used 12v 30w thing attached to masters.
      Certainly Home centeretc. Compared with the sola sold in. (It will not brighten dramatically)
      However, whether the solder used for the contact part with the electrode of Valve is not very good, or if it ran about 4000 km, the solder melted with heat and broke.
      It may be a fate of high efficiency Valve, but it is too bad that the price is expensive.

      Although it was exchanged from the LED manufactured by China, I thought that the LED was bright as it was, but because of optical axis and various problems, I replaced it with Halogen B 2 C of Pine Stripe.
      While changing from LED to Halogen, I was prepared for a considerable amount of light Down, but what is not enough brightness! And, unlike LEDs Lo. Hi change is also clear! Clearly! It is different from the LED! It was the correct answer after exchanging for Halogen! Those who feel dark in this Valve think that repair of the electrical system is necessary (LOL smile)
      Obviously it is brighter than OEMHalogen bulb! Naturally (LOL smile)...

      Since it used by commuting, it thought that a not much showy color was unsavory, and it was made the CLEAR.
      -- a pure color -- clever -- it is the touch which came out as it is and became bright the 1 surroundings. although there are few

      custom-made elements, visibility is also good and brightness is also perfect -- it is .
      which puts in a Harness high in taking the Risk of the
      > Trouble and putting in the Valve of high wattage -- considering things, I think that a Cost performance is high.