หน้าแรก

【domino】Race Type Grip

    • ความพึงพอใจ:

      Easy to grip and easy to use

      • ผู้แสดงความคิดเห็น: Japan User(translated)
      • เผยแพร่เมื่อ: 2018-11-08 03:57:25
      We exchanged from five ones that are divided into three of the Kawasaki's Carburetor Vehicles generation OEMGrip. I do not know if someone can sympathize, but thanks to Line it is a Grip that feels 2 to 3 mm thicker than Grip Body. (Although it is subjective) The Grip of this Race type is made quite narrowly and it seems that it is thin by about 5 mm when it is not measured from the above-mentioned Kawasaki's Grip when measured. Normally, because there are many round trips of 100 km range, we have improved the operability compared to the vibration coming from the narrowness of Grip. When it is time to use Winter Gloves, since Gloves' batting will inevitably affect the operation of Lever and Throttle, not only the Small people in other impresions but also those who want to seek operability even if you use Winter Gloves I would like to Recommendation to. It seems to be somewhat higher than other companies' products, but it is a difference of several hundred yen, so why not try it by all means.

      ตอบกลับ

      ลงทะเบียนเพื่อแสดงความคิดเห็น [ลงทะเบียนแบบสมบูรณ์]

      ความคิดเห็นอื่น ๆ

      I replaced my GALINDO super bike with this product.
      The primary difference is its smooth and slim design.

      There's almost no brim at the bar end area and looks simple.
      Also, the grip has the minimum knurling pattern. It doesn't get weirdly jammed, and you can grip or slide it smoothly.

      I have a high throttle kit, but not only did it facilitate the opening/closing operation, it made me realize the play amount more easily.

      The rubber has double layer structure. The inner perimeter is rather hard and free of deflection or twists. The outer perimeter is soft but not weirdly twisted.
      Still, it may not be that durable.
      It is easier to install on handle bars or throttle pipes than GALINDO parts.

      It is recommended for those who like to control their hand numbness by inner weights and make their grips have more direct touching feel.

      I bought Domino's street type grips previously. But they were too thick for me to handle comfortably. I prefer thin grips.
      So I purchased thin race type model this time.
      They are moderately thin as I expected.
      The material is not rubber so they feel a little hard but soon I got used to them.
      I felt that vibration diminished.
      Especially, the right hand numbness reduced.

      Previously, it was TZ Grip, but I did not like the Grip end part, I thought that there was no good thing, I found a good one. The feeling of use is very good. There is not much durability, but it does not matter.

      I have Small hands, this thinness is just right I feel a firm feeling of grip and feel Clutch lever lightly. I installed it on GSX 1300 R HAYABUSA but after cutting the protruding part of the adjustment inside the Grip, I could wear the Grip adhesive separately sold without any problems.

      I changed my hand from OEM so I put this on hand. OEM was a little big and it had to be grasped firmly but this was small diameter and it was able to grasp firmly with Small irregularities of nonslip. She got a little ride but it was said that Accelerator operation became easier, and when I noticed, her motorscycle also had a color difference of this
      Perhaps it is recommended for women who are a little handy.

      We exchanged a lot of grips but it is thinner than other grips and boasts overwhelming ease of grip. Those who want to concentrate and get on the Motorcycle please try it.

      I used the Street Type before, but this Race type was easier to grasp and it was a good feeling of operability.
      Rubber inside is firm and hard, the surface Rubber softens and fits in hand.

      People who ran Ranking on a thin and easy-to-grasp course were also using
      Fitting also has Just fit tiredness feeling Inventory seems to be slightly left

      Normal grip of MT - 07 is a cute little snappy thing.
      When I went out in a break-in driving, I felt a sense of incongruity in the absence of direct feeling.
      Although it is a Mild Motorcycle, we have enough power so we are concerned about opening and closing Axel.
      Accelerator grip thinks that it is a Large thing part that decides Motorcycle's easy ride and tiredness.

      Though it is thought that preference is various as thing with earthquake-resistant Gel or thick and soft thing, Personally I prefer a slim TZ Type that is solid.

      We found out of the products of Wei Big, the Grip firmly caught in the palm, and the sense of Direct was satisfactory.
      Besides Simple, Gray domino letters are the best Cool!
      I like the best Grip I have ever met.

      However, although 120-mm Grip is necessary, the length is 126 mm, so whatever you think, I was worried about the installation.
      Looking at the items that arrived, there is a part that is difficult to see and can be cut inside the brim portion of the handful, so that it is about 6 mm long Spec. It seems to be coping with.
      Cutter Knife made it easy to cut and got things without it.

      Fixed with Grip bond and work done.

      Even at the future Motorcycle replacement, it is likely to be my standard Items.

      This time the Grip exchange is the second time, but DominoGrip that I was worried about before!
      First I felt that I felt it was not slippery, I thought that it was a sense of security while actually get on the train.
      However, if I say it fortunately, I chose this for race but if it is on for a long time, it may be tiring because the vibration of Motorcycle is transmitted to Direct. Well, I think that this neighborhood is a matter of preference, but I'd like to try also for the Story at the next exchange ♪

      There is also a thing called Race type, it feels thinner and harder than Normal grip.
      Personally I like it because Fee Ring becomes Direct.
      It is also PlusPoint that you can choose the color.
      However, there were places where the surface wears out at an early stage, so I think that it is better not to expect Life much.

      I tried grasping the Stripe Grip and loved it at first sight.
      I chose Sir Kit type for Design-like reasons, but it was surprisingly hard compared to STREET - - -
      Also, Quantity : Pair (for Left and Right) Length is about 2 mm shorter.

      It is easy to grasp your hands as well as Small Shaku.
      It looks pretty good and I am satisfied with only the products of important parts related to the operability of Motorcycle.

      Domino's Racing grip is somewhat slimmer than a Grip that is mounted in an OEM.

      Surface Grip is very good and it is just a good grip and slippery when operating with RACING Gloves.

      However, if you use it with STREET, it may feel the vibration is Large or textured impression because of its Direct feeling.

      I think that it is optimal for Circuit driving etc..

      Recently Grip has come to be able to choose.
      This time I chose domino's for Race.
      In the new CBR 250 RR, the Throttle side has a Throttle holder shape for DBW, and if you attach a general AfterMarket Grip, a gap will be created with the Switch box.
      If you can only endure that point, it will not be a problem.
      In this time, cut the inner Yellow color part and adjust the Length and attach.

      The slender and Grip feeling is also satisfactory.
      Silver&Color : Because it is Yellow's body, I chose Yellow-colored guy, but since it stands out somewhat, I think I will try it per Gray next time.
      In the past I was attaching A Lead made to another Motorcycle, but with Cushion sex I think that one is over there.

      I think that the character of domino is also cool Accent.

      Installation is like any Grip, but it may be hard without Air.

      Recently Grip has come to be able to choose.
      This time I chose domino's for Race.
      In the new CBR 250 RR, the Throttle side has a Throttle holder shape for DBW, and if you attach a general AfterMarket Grip, a gap will be created with the Switch box.
      If you can only endure that point, it will not be a problem.
      In this time, cut the inner Yellow color part and adjust the Length and attach.

      The slender and Grip feeling is also satisfactory.
      Silver&Color : Because it is Yellow's body, I chose Yellow-colored guy, but since it stands out somewhat, I think I will try it per Gray next time.
      In the past I was attaching A Lead made to another Motorcycle, but with Cushion sex I think that one is over there.

      I think that the character of domino is also cool Accent.

      Installation is like any Grip, but it may be hard without Air.

      Domino's Racing grip is somewhat slimmer than a Grip that is mounted in an OEM.

      Surface Grip is very good and it is just a good grip and slippery when operating with RACING Gloves.

      However, if you use it with STREET, it may feel the vibration is Large or textured impression because of its Direct feeling.

      I think that it is optimal for Circuit driving etc..

      It is easy to grasp your hands as well as Small Shaku.
      It looks pretty good and I am satisfied with only the products of important parts related to the operability of Motorcycle.

      I tried grasping the Stripe Grip and loved it at first sight.
      I chose Sir Kit type for Design-like reasons, but it was surprisingly hard compared to STREET - - -
      Also, Quantity : Pair (for Left and Right) Length is about 2 mm shorter.