หน้าแรก

【KIJIMA】Blinker Lens OEM Type

    • ความพึงพอใจ:

It cannot carry out bolt-on to a pure blinker. The accuracy of processing had the strange form where two which will be bad a...

  • ผู้แสดงความคิดเห็น: Japan User(translated)
  • เผยแพร่เมื่อ: 2018-02-16 09:07:21
It cannot carry out bolt-on to a pure blinker.
The accuracy of processing had the strange form where two which will be bad and which was bought had the same form of a die, far from bad.
First, it does not become useful, unless the lug which must not be in the portion which touches the case of the lens circumference is missing from 2-mm40 mm in die length in thickness and deletes those with two place, and this.
In addition, the cylinder portion which screws in a screw thread and becomes a female screw does not accomplish the business which compares pure and presses down the end of a passive reflector short 3 mm.
If it thinks that this product is a pure type blinker to the last, and is a kind of the raw material which has the necessity for processing in attaching, I will think that it is satisfactory.

ตอบกลับ

ลงทะเบียนเพื่อแสดงความคิดเห็น [ลงทะเบียนแบบสมบูรณ์]

ความคิดเห็นอื่น ๆ

He thought that he made appearance a clear and wanted to make it SUKKURI, and bought it! Good a [point] and price are cheap! Since the kind of a model or motorcycle appears in the flesh side.
With [ if it chooses so that it may not make a mistake ] no problem! If it will be OK if you buy it in Webike, but you buy it in a store, they will be right-and-left cautions! It - Attaches and easy! It is easily exchangeable if there is a driver.
If it makes into a clear lens whether to call it a bad point, it must do! It is necessary to make - transparent valve (electric lamp) into orange.
If it does not change, it will be caught in an automobile inspection or the police as unfixed vehicles.
I think that it became legible more brightly when it was itself, although it was the visibility after exchange.
Daytime is also intelligible in beautiful and bright orange.
It is clear lens x4 at all the blinkers of a motorcycle. Before or after electric lamp x4 (since order specification is different, it is check required at time of exchange) a total of 4,000 yen ... Since it can do custom simply and can do comparatively comparatively cheap, anyone thinks that he is recommend goods made first.

It cannot carry out bolt-on to a pure blinker.
The accuracy of processing had the strange form where two which will be bad and which was bought had the same form of a die, far from bad.
First, it does not become useful, unless the lug which must not be in the portion which touches the case of the lens circumference is missing from 2-mm40 mm in die length in thickness and deletes those with two place, and this.
In addition, the cylinder portion which screws in a screw thread and becomes a female screw does not accomplish the business which compares pure and presses down the end of a passive reflector short 3 mm.
If it thinks that this product is a pure type blinker to the last, and is a kind of the raw material which has the necessity for processing in attaching, I will think that it is satisfactory.
The lens of a right orange is purity and the left is a kijima blinker lens pure type.
Although I think that it is not understood since the lug is deleted, the difference in the die length of a cylinder portion should be understood.

XJR400R was equipped.
Since attachment is only exchanged for the lens of the usual orange, it does not start with 10 minutes in order.
It unites, although it becomes the clean impression, and I regard a bulb as the chrome ball instead of a free orange ball being smarter.

XJR400R was equipped.
Since attachment is only exchanged for the lens of the usual orange, it does not start with 10 minutes in order.
It unites, although it becomes the clean impression, and I regard a bulb as the chrome ball instead of a free orange ball being smarter.

a

It cannot carry out bolt-on to a pure blinker.
The accuracy of processing had the strange form where two which will be bad and which was bought had the same form of a die, far from bad.
First, it does not become useful, unless the lug which must not be in the portion which touches the case of the lens circumference is missing from 2-mm40 mm in die length in thickness and deletes those with two place, and this.
In addition, the cylinder portion which screws in a screw thread and becomes a female screw does not accomplish the business which compares pure and presses down the end of a passive reflector short 3 mm.
If it thinks that this product is a pure type blinker to the last, and is a kind of the raw material which has the necessity for processing in attaching, I will think that it is satisfactory.
The lens of a right orange is purity and the left is a kijima blinker lens pure type.
Although I think that it is not understood since the lug is deleted, the difference in the die length of a cylinder portion should be understood.

It cannot carry out bolt-on to a pure blinker.
The accuracy of processing had the strange form where two which will be bad and which was bought had the same form of a die, far from bad.
First, it does not become useful, unless the lug which must not be in the portion which touches the case of the lens circumference is missing from 2-mm40 mm in die length in thickness and deletes those with two place, and this.
In addition, the cylinder portion which screws in a screw thread and becomes a female screw does not accomplish the business which compares pure and presses down the end of a passive reflector short 3 mm.
If it thinks that this product is a pure type blinker to the last, and is a kind of the raw material which has the necessity for processing in attaching, I will think that it is satisfactory.

He thought that he made appearance a clear and wanted to make it SUKKURI, and bought it! Good a [point] and price are cheap! Since the kind of a model or motorcycle appears in the flesh side.
With [ if it chooses so that it may not make a mistake ] no problem! If it will be OK if you buy it in Webike, but you buy it in a store, they will be right-and-left cautions! It - Attaches and easy! It is easily exchangeable if there is a driver.
If it makes into a clear lens whether to call it a bad point, it must do! It is necessary to make - transparent valve (electric lamp) into orange.
If it does not change, it will be caught in an automobile inspection or the police as unfixed vehicles.
I think that it became legible more brightly when it was itself, although it was the visibility after exchange.
Daytime is also intelligible in beautiful and bright orange.
It is clear lens x4 at all the blinkers of a motorcycle. Before or after electric lamp x4 (since order specification is different, it is check required at time of exchange) a total of 4,000 yen ... Since it can do custom simply and can do comparatively comparatively cheap, anyone thinks that he is recommend goods made first.