- หน้าแรก
- อะไหล่แต่ง
- ท่อไอเสีย
- ท่อ Vantage
- Permatex
- Permatex: ผ้ากันร้อนพันท่อไอเสีย
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
ความจุภายใน : 5 ซม. x 100 ซมทนความร้อนอุณหภูมิ : 426 องศา
รูปร่าง : เทปใส epoxy resin
glass fiber
Cracks Seal leaks
Thermal adsorption
Fluid Color: clear
Heat resistant temperature: -427 degrees.
Size: 5cm x 100cm
[fire code hazardous materials]
non-inflammability
flammables!
รายละเอียดคำถาม
ป้องกันการรั่วไหลของไอเสียด้วยผ้าพันแผลใยแก้วที่ชุบด้วยพลาสติกอีพ็อกซี่โดยพันรอบรูที่เปิดในท่อระบายอากาศหรือระบบไอเสีย
มีความต้านทานการสั่นสะเทือนและความยั่งยืนที่ดีเยี่ยม. กรุณาใช้สีโป๊วสำหรับซ่อมชิ้นส่วนที่เป็นสนิมด้วยสีโป๊วไอเสียเพื่อพันรอบผ้าพันแผลไอเสีย Epoxy resin-impregnated fiberglass tape is used to seal cracks and leaks.
The tape is absorbed by the heat of the muffler.
[Instructions for use]
1. Remove rust and dirt with a wire brush or sandpaper.The repair area must be clean.Let the vehicle run for 5 to 10 minutes before wrapping the bandage.
2. Peel off the backing paper from the bandage.Wrap the bandage around the damaged area, making sure that the ends of the bandage overlap by at least 12.7 mm.For added protection, widen the overlap to 25.4 mm.
3. Temporarily secure the ends of the bandage with wire.
4. Let the car run for about 30 minutes.The heat from the exhaust system melts the epoxy resin in the bandage and creates a hard coating.
To prolong the life of the repaired area, apply muffler & tailpipe sealer to the damaged area before wrapping the bandage around it.
[First aid]
This product contains epoxy resin.
If swallowed, immediately contact a poison control center or a physician and receive medical treatment.
Don't try to make me throw up.
In case of contact with eyes, rinse with water for 15 minutes.
If it comes in contact with the skin, rinse thoroughly with water.
มีความต้านทานการสั่นสะเทือนและความยั่งยืนที่ดีเยี่ยม. กรุณาใช้สีโป๊วสำหรับซ่อมชิ้นส่วนที่เป็นสนิมด้วยสีโป๊วไอเสียเพื่อพันรอบผ้าพันแผลไอเสีย Epoxy resin-impregnated fiberglass tape is used to seal cracks and leaks.
The tape is absorbed by the heat of the muffler.
[Instructions for use]
1. Remove rust and dirt with a wire brush or sandpaper.The repair area must be clean.Let the vehicle run for 5 to 10 minutes before wrapping the bandage.
2. Peel off the backing paper from the bandage.Wrap the bandage around the damaged area, making sure that the ends of the bandage overlap by at least 12.7 mm.For added protection, widen the overlap to 25.4 mm.
3. Temporarily secure the ends of the bandage with wire.
4. Let the car run for about 30 minutes.The heat from the exhaust system melts the epoxy resin in the bandage and creates a hard coating.
To prolong the life of the repaired area, apply muffler & tailpipe sealer to the damaged area before wrapping the bandage around it.
[First aid]
This product contains epoxy resin.
If swallowed, immediately contact a poison control center or a physician and receive medical treatment.
Don't try to make me throw up.
In case of contact with eyes, rinse with water for 15 minutes.
If it comes in contact with the skin, rinse thoroughly with water.
คำเตือน
•ส่วนที่มีลักษณะเป็นสีแดงในภาพถ่ายผลิตภัณฑ์คือแผ่นป้องกัน. สีของผลิตภัณฑ์มีความโปร่งใส•แข็งตัวที่อุณหภูมิประมาณ 80 องศาขึ้นไป *Wear gloves to protect your hands from the hot exhaust system.
*May cause irritation to the eyes and skin.
*Avoid contact with eyes, skin and clothing.
*Keep out of reach of children.
*There may be changes in product specifications due to the manufacturer's reasons.
ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/