ชุดแฮนด์บาร์สแตนเลสยกสูง แบบที่ 2 เส้นผ่านศูนย์กลาง 7/8 นิ้ว

  • รหัสสินค้า: HB0062B-01
    • IN STOCK
    • Out stock

฿1,803

คะแนนวีไบค์: +18 Points

ข้อมูลการจัดส่ง

  • ระบบกำลังคำนวณวันที่พร้อมจัดส่ง.....
ถึง ThaiLand
เปลี่ยน
เลือกที่อยู่:
ThaiLand
    ค่าจัดส่ง ฿100

    จำนวน

    สินค้าแท้ 100% รับประกัน 7 วัน รับเงินคืนฟรี ราคาสุทธิ

    ใช้สำหรับรุ่น

    ดูทั้งหมด
    SUZUKI
    GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones. GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo. GSX400 05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap. ST250 E Type -07 NJ4AA *Processing of switch holes required|* Normal side caps can be used. ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock.
    แสดงเพิ่มเติม
    KAWASAKI
    BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) BALIUS 91-94 *Processing of switch hole required|* Required side cap (for 18mm diameter) ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
    แสดงเพิ่มเติม
    HONDA
    MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required HORNET250 *Need to drill switch hole MONKEY 09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole APE 50 08-12 (FI Drum Brake) *Processing of switch holes is required APE 50 -07|08 (Carburetor)*APE100 (09-) only
    แสดงเพิ่มเติม

    รายละเอียดสินค้า

    รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

    คุณสมบัติ

    สีของแฮนด์บาร์:ดำ

    [ข้อมูลจำเพาะของแฮนด์บาร์]
    แฮนด์บาร์: เหล็กดำ/เส้นผ่าศูนย์กลางด้านนอกΦ22.2mm/เส้นผ่าศูนย์กลางด้านใน Φ18mm
    สามารถใช้สายเคเบิ้ลเดิมได้และท่อต่างๆ

    [ขนาดของแฮนด์บาร์]
    ความสูงทั้งชิ้น: 63mm
    ความกว้างของทั้งชิ้น: 660mm
    ระยะห่างตรงกึ่งกลางของตุ๊กตาสองตัว: 135mm
    โน้มไปข้างหลัง: 160mm
    มุมด้านใน: 32-องศา
    ทำมุม: 60-องศา

    รายละเอียดคำถาม


    ผ้าคอตตอน 100% ผลิตในประเทศญี่ปุ่น. เป็นเครื่องต้นแบบการยืนยันการติดตั้งการผลิตจำนวนมากได้รับการจัดการอย่างต่อเนื่องโดย บริษัท ของเรา. เป็นมือจับที่ได้รับความสนใจเป็นอย่างมากเช่นการเลือกใช้วัสดุอย่างพิถีพิถันการขัดหลายชนิดการตอกหมายเลขชิ้นส่วนการดัดและการเชื่อมที่มีความแม่นยำสูงการเคลือบผิวคุณภาพสูงจากเทคโนโลยีและบุคลากรที่ได้รับการปลูกฝังจากผู้เชี่ยวชาญมาหลายปี ที่ Higashi Osaka. ใช้วัสดุเหล็ก STKM13A ที่ทนต่อแรงดึงได้ดีเยี่ยม. เป็นการล้างค่ามาตรฐานความปลอดภัย JMCA. ล้างค่ามาตรฐานความปลอดภัยของ JMCA ใช้การป้องกันสนิมสองชั้นโดยการทาสีอะครีลิกจากด้านบนของการชุบโครเมียมดำ

    คำอธิบาย



    คลิกที่นี่เพื่อดูที่จับลิง
    คลิกที่นี่เพื่อดูสีอื่น ๆ
    รายการขนาดด้ามจับปกติสำหรับสกูตเตอร์รุ่นอเมริกัน 7/8
    รายการขนาดด้ามจับปกติสำหรับรุ่นอเมริกา 1 นิ้ว
    รายการขนาดด้ามจับปกติสำหรับรุ่นอเมริกา 1 "

    คำเตือน


    *ตัวหนีบแฮนด์บาร์ (ตัวยึดหรือเสา) ในภาพไม่รวมอยู่ในผลิตภัณฑ์
    *สัญลักษณ์ขนาดใช้สำหรับเวลาแนวนอน
    *หากมีการเปลี่ยนแปลงโครงสร้างจะต้องมีการเปลี่ยนแปลง เปลี่ยนความสูงเกิน ± ความกว้าง 40 มม. ± 20 มม. จากขนาดตัวรถที่อธิบายไว้ในเอกสารยืนยันตัวรถ
    *ผลิตภัณฑ์ในภาพอาจมีสี/ประเภทอื่นๆ

    ใช้สำหรับรุ่น

    SUZUKI
    GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones. GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo. GSX400 05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap. ST250 E Type -07 NJ4AA *Processing of switch holes required|* Normal side caps can be used. ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock.
    แสดงเพิ่มเติม
    KAWASAKI
    BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) BALIUS 91-94 *Processing of switch hole required|* Required side cap (for 18mm diameter) ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
    แสดงเพิ่มเติม
    HONDA
    MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required HORNET250 *Need to drill switch hole MONKEY 09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole APE 50 08-12 (FI Drum Brake) *Processing of switch holes is required APE 50 -07|08 (Carburetor)*APE100 (09-) only
    แสดงเพิ่มเติม
    Others
    Universal

    ทบทวน

    4.2

    / 5

    (15 ทบทวน)

    4

    10

    1

    0

    0

    กรอง:
    เลือกดูจาก:

    สินค้าที่ดูก่อนหน้า

    มีสินค้าในสต๊อกพร้อมจัดส่ง

    สินค้าแนะนำ

    สินค้าที่เกี่ยวข้อง

    สินค้าแนะนำ

    สินค้าที่ดูล่าสุด

    New Custom Article

    ดูทั้งหมด